HEMT2101-TC-2

PRELIMINARY DATA SHEET | MARCH 17, 2008 Applications High performance supertrunking links High power distribution networks Redundant ring architectures FTTx networks 2100 Series 1550 nm Externally Modulated Transmitter Features Single or Dual Optical Outputs Front Panel RF Test Point RS232 Control Interface Electro-Fluorescence Status Display OMI / RF Gain Adjustment AGC Select: CW, Video, Manual (No AGC) Industry Leading Field Adjustable SBS Suppression Field Adjustable Electronic Dispersion Compensation (EDC) EMCORE’s DEMT/SEMT/HEMT/FEMT 2100 series product line is a family of stateof-the-art high performance 1550 nm externally modulated CATV fiber optic transmitters. Packaged in a convenient 1U 19” rack housing, this line of transmitters couples high optical output powers, up to 11.0 dBm, with low optical linewidth resulting in unmatched performance. The characteristics of the EMCORE transmitter design exhibit high CNR when coupled with one or more EDFAs over 100km, or used stand alone up to 80km. The optical modulator, combined with the proprietary predistortion circuit, provides superior CTB and CSO performance with SBS suppression levels of greater than 20 dBm. Newly introduced features such as built in field adjustable SBS control and electronic dispersion compensation allow these transmitters to be quickly optimized in the field for any link or application without the need to procure specifically tuned transmitters. This affords the system designer a level of flexibility previously unknown in the CATV market place. All of these characteristics together provide a line of high quality; industry-leading transmitters that have the versatility needed to support HFC networks far into the 21st century. The DEMT series transmitters are designed to be employed as a low cost, high performance solution for applications where the required fiber length is in the range of 20 to 50 kilometers. Advanced, high power, DFB laser technology allows these transmitters to be fielded without the use of expensive and performance degrading EDFAs. This unique externally modulated transmitter technology allows the DEMT series of transmitters to be used in many novel HFC applications and architectures. The SEMT series transmitters are designed to be the most versatile model within the 2100 series family of 1550nm externally modulated transmitters. They can easily be configured to meet most HFC network solutions requiring link lengths in the range of 50 to 70 kilometers with one EDFA as well as links utilizing multiple EDFA’s. In addition, they will perform optimally in systems that require multiple optical splits and fiber branching incorporating unequal fiber lengths. The HEMT series transmitters are high performance, 1550nm externally modulated transmitters optimized for single EDFA fiber links in the 70 to 90 kilometer range. These transmitters take advantage of the 2100 series advanced fiber dispersion compensation circuitry to provide exceptional CATV performance. The HEMT series of transmitters provide a cost efficient, transport solution for medium to long distances The FEMT series transmitters are intended for use in FTTx architecture designs requiring high quality transmission over varying transmission lengths and EDFA output powers. These transmitters successfully support very high optical launch powers while controlling the detrimental effects of Stimulated Brillouin Scattering (SBS), group velocity dispersion (GVD), and self phase modulation (SPM) that normally limit performance in conventional externally modulated products. 1 of 5 For more information on this and other products: Contact EMCORE Sales at 626-293-3400, or visit www.emcore.com. xEMT 2100 Series 1550nm Transmitter PRELIMINARY DATA SHEET | MARCH 17, 2008 Optical / Electrical Characteristics DEMT PROPERTY PERFORMANCE (note 1,2,3,4) Specified Link Length Channel Plan Output Power Noise Bandwidth SBS Suppression Carrier to Noise Ratio Composite Second Order Composite Triple Beat Composite Triple Beat UNITS L (km) Po (dBm) BW (MHz) (dBm) CNR (dB) CSO (dBc) CTB (dBc) CTB (dBc) DEMT2101 40 NTSC 80-Ch 11.0 4 > 12.0 54.0 -65 -65 -64 MODELS DEMT2102 40 PAL 60-Ch 11.0 5 >12.0 54.0 -65 -65 -64 DEMT2103 40 NTSC 110-ch 11.0 4 >12.0 51.0 -65 -65 -64 DEMT2104 40 PAL 89-Ch 11.0 5 >12.0 51.0 -65 -65 -64 COMMENTS Min. Min. Min. Max. Max. @ +25°C Max. @ 0oC to 50oC SEMT PROPERTY PERFORMANCE (note 1,2,3,4) Specified Link Length Channel Plan Output Power Noise Bandwidth SBS Suppression Carrier to Noise Ratio Composite Second Order Composite Triple Beat Composite Triple Beat UNITS L (km) Po (dBm) BW (MHz) (dBm) CNR (dB) CSO (dBc) CTB (dBc) CTB (dBc) PROPERTY PERFORMANCE (note 1,2,3,4) Specified Link Length Channel Plan Output Power Noise Bandwidth SBS Suppression Carrier to Noise Ratio Composite Second Order Composite Triple Beat Composite Triple Beat SEMT2101 65 NTSC 80-Ch 6.0/ 6.0 4 16.0 53.0/ 53.0 -65/ -65 -65 -64 UNITS L (km) Po (dBm) BW (MHz) (dBm) CNR (dB) CSO (dBc) CTB (dBc) CTB (dBc) MODELS SEMT2102 65 PAL 60-Ch 6.0/ 6.0 5 16.0 53.0/ 53.0 -65/ -65 -65 -64 SEMT2103 65 NTSC 110-ch 6.0/ 6.0 4 16.0 50.0/ 50.0 -65/ -65 -65 -64 MODELS HEMT2101 80 NTSC 80-Ch 6.0/ 6.0 4 18.0 52.0/ 52.0 -65/ -65 -65 -64 HEMT2102 80 PAL 60-Ch 6.0/ 6.0 5 18.0 52.0/ 52.0 -65/ -65 -65 -64 SEMT2104 65 PAL 89-Ch 6.0/ 6.0 5 16.0 50.0/ 50.0 -65/ -65 -65 -64 COMMENTS COMMENTS Min. Note:Higher output powers available Min. Min. Max. Max. @ +25°C Max. @ 0oC to 50oC HEMT Min. Min. Min. Max. Max. @ +25°C Max. @ 0oC to 50oC COMMENTS FEMT2104 20 PAL 89-Ch 6.0/ 6.0 5 20.0 45.0 -58 -58 Min. Min. Min. Max. Max. FEMT PROPERTY PERFORMANCE (note 1,2,3,4) Specified Link Length Channel Plan Output Power Noise Bandwidth SBS Suppression Carrier to Noise Ratio Composite Second Order Composite Triple Beat Units L (km) Po (dBm) BW (MHz) (dBm) CNR (dB) CSO (dBc) CTB (dBc) FEMT2101 20 NTSC 80-Ch 6.0/ 6.0 4 20.0 48.0 -58 -58 MODELS FEMT2102 20 PAL 60-Ch 6.0/ 6.0 5 20.0 48.0 -58 -58 FEMT2103 20 NTSC 110-ch 6.0/ 6.0 4 20.0 45.0 -58 -58 2 of 5 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com EMCORE Broadband Copyright 2008. EMCORE Corporation xEMT 2100 Series 1550nm Transmitter PRELIMINARY DATA SHEET | MARCH 17, 2008 Notes: 1. Unless stated otherwise all specifications apply over full temperature range. 2. Unless stated otherwise specifications apply for nominal RF input level as defined in section 4, after 5 minute stabilization period. 3. Specifications separated by a slash are port1 / port 2. 4. Tested per Test Configuration Table 5. Noise figure for the EDFA = 4.5 ~ 5.5 dB 6. Corning SMF-28 single mode fiber 7. Receiver responsivity is 0.95 mA/mW, Equivalent noise current is 7 pA/(Hz)1/2 General and Mechanical Specifications PROPERTY Wavelength Channel Plan Optical Connector Remote interface Operating Temperature Storage Temperature Power Consumption Agency Listings Transportation Vibration Transportation Shock Operating Humidity Supply Range Enclosure PROPERTY Input Power Range REQUIREMENT 1555 +/-5 nm SC/APC RS-232 0°C to 50°C -20°C to 70°C 50W max FCC: Subpart B. Part 15, class “A” CE: EN50083-2 GR-2853-CORE GR-2853-CORE 20% to 85% 90 to 265 VAC, 50/60 Hz 36 – 60 VDC 19.0”W x 15.32”D x 1.72”H REQUIREMENT 17 +/-1 dBmV/ch 80 NTSC channels 15 +/-1 dBmV/ch 110 NTSC channels 18 +/-1 dBmV/ch 60 PAL channels 16 +/-1 dBmV/ch 89 PAL channels Input Power Range 19 +/-2 dBmV/ch 80 NTSC channels 17 +/-2 dBmV/ch 110 NTSC channels 20 +/-2 dBmV/ch 60 PAL channels 18 +/-2 dBmV/ch 89 PAL channels Front Panel RF Gain / OMI Adjustment Range Frequency Range Flatness Input impedance Input Return Loss Front Panel RF Tap Front Panel RF Tap Flatness +2 / -4 dB from nominal setting 45MHz – 870MHz +/- 0.50 dB +/- 0.75 dB 75Ω 16dB min -20 +/- 1 dB down from RF input +/- 1 dB 45MHz - 870MHz 45MHz - 870MHz 45MHz - 550MHz 45MHz - 870MHz COMMENTS Manual mode Manual mode Manual mode Manual mode CW mode CW mode CW mode CW mode CATV Performance can vary slightly COMMENTS ITU-grid available Custom channel plans available Other styles available Custom interfaces available (VAC) (VDC) In Shipping package In Shipping package Non-condensing Standard Optional 3 of 5 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com EMCORE Broadband Copyright 2008. EMCORE Corporation xEMT 2100 Series 1550nm Transmitter PRELIMINARY DATA SHEET | MARCH 17, 2008 Test/Link Configuration PROPERTY DEMT SEMT HEMT FEMT Notes: EDFA None 16 dBm 18 dBm 20 dBm LINK1 40 Km 65 Km 80 Km 20 Km RECEIVED POWER2 0.0 dBm at the receiver 0.0 dBm at the receiver 0.0 dBm at the receiver -5.5 dBm at the receiver 1. 2. Corning SMF-28 single mode fiber (0.2dB/km loss assumed) Receiver responsivity is 0.95 mA/mW, Equivalent noise current is 7 pA/(Hz)1/2 Outline Drawing 4 of 5 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com EMCORE Broadband Copyright 2008. EMCORE Corporation xEMT 2100 Series 1550nm Transmitter PRELIMINARY DATA SHEET | MARCH 17, 2008 Laser Safety Information CAUTION – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser exposure. CAUTION - invisible laser energy is present at the output(s) of the optical connectors. AVOID DIRECT EXPOSURE TO THE BEAM. Laser output is invisible and eye damage may result. CAUTION - do not attempt to open any optical connections with the laser enabled. Laser power up to 17.5 mW at approximately 1550 nm could be accessible with optical connectors open. One or both of the following precautionary labels can be found on the fiber optic connector bulkhead assembly located at the rear of the transmitter. DANGER CAUTION INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM DISCONNECTED OPTICAL CONNECTOR MAY EMIT INVISIBLE OPTICAL ENERGY DO NOT VIEW WITH OPTICAL INSTRUMENTS Ordering Information EMT210 - - - Model Type D - Short Link S - Medium Link H - Long Link F - FTTx 1 – NTSC 80-Ch 2 – PAL 60-Ch 3 – NTSC 110-ch 4 – PAL 89-Ch Channel Plan Wavelength blank – 1555+/-5 nm XX – ITU Channel Connectors Option SC FC EC TC GC - SC/APC - FC/APC - E2000/APC Diamond - SC/UPC - FC/UPC 1 – VAC 2 – VDC Voltage Supply Example: SEMT2101-35-SC-1: Medium Link transmitter with 80 NTSC channel loading, ITU 35, SC/APC optical connector, and AC power 5 of 5 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com EMCORE Broadband Copyright 2008. EMCORE Corporation