OTP-1DVIR2AR-C3D-XX-IC

OTP-1DVI2A Optiva® DVI / VGA & Stereo Audio Optiva® SERIES Professional Media Transport The Optiva® OTP-1DVI2A is the perfect solution for transmitting the full range of VESA dual-link DVI and SMPTE compliant video over long or short distances with a single wavelength. Other transport systems do not offer a comparable range of signals and resolutions over a single wavelength. The single fiber, single wavelength solution is perfect for any professional audio / visual application such as remote digital theaters, concerts, video conferencing, digital signage, and similar applications like electronic billboards and sports arena screens. Optiva® was designed to maintain a quality uncompressed signal. The video resolution input is the same video resolution that is output. The OTP-1DVI2A enables one to input Features Optiva® Daisy-Chain Technology Multimode or single mode options (up to 80 km over one fiber) Supports single and dual-link DVI resolutions up to 2048 x 1536 Supports VGA resolutions up to 1920 x 1200 Supports Component Video (RGB) up to 1080p H & V Sync Frequency range of 60 to 85 Hz (vertical) Uses all-digital processing for crystal clear picture with zero signal degradation Real-time video transmission for exceptional quality and resolution Standard DVI-I video connector (HD-15 adapter is available for RGB/VGA interface) DVI and output VGA or vice-versa. Switching and multicasting the OTP-1DVI2A over the OptiLinx® Switching Platform is quick and simple, making the OTP-1DVI2A the perfect solution for large-screen, high-resolution digital presentations allocating only one fiber to each display. System Design Optiva® insert cards support both 19” rack mount and compact table top or wall mountable enclosures. The 19” rack mount enclosure (Model: OT-CC-16-100) can support up to 16 insert cards. It also supports dual-redundant, hot-swappable power supplies (Model: OT-CC-16-100-RPS) utilizing two PS-100 power supplies or two PS-200 power supplies (Model: OT-CC-16-200-RPS). Also available in the 19” rack mount form factor is a 4-slot enclosure; which houses 4 insert cards in 1RU of rack space (Model: OT-CC-4-1U). The compact one slot (Model: OT-DTCR-1) and two slot (Model: OT-DTCR-2) enclosures both use an external power supply (Model: PS-9012). VGA • • • • DVI • • • • • • • • • • Resolutions 640 x 480 800 x 600 1024 x 768 1280 x 720 1280 x 1024 1400 x 1050 1600 x 1050 1680 x 1050 1920 x 1200 2048 x 1536 Resolutions VGA SVGA XGA WXGA SXGA SXGA+ UXGA WSXGA+ WUXGA QXGA Max Refresh Rate (Hz) 85 85 85 85 85 75 60 (VGA), 75 (DVI) 60 60 (VGA), 75 (DVI) 60 Max Refresh Rate (Hz) 60 60 60 Some Resolutions utilize Reduced Blanking Technology Applications Digital Signage / Remote Kiosks Video Conferencing / Digital Cinema High-Resolution Presentations DVI / VGA Switching & Routing Professional Home Theater • • • • • xRGB • • • 480i / 480p 720p 1080i / 1080p Copyright © 2008 Emcore Corporation 858 450 0143 858 450 0155 video-sales@emcore.com www.emcore.com OTP-1DVI2A Optiva® DVI / VGA & Stereo Audio Optiva® SERIES Professional Media Transport Models Transmitter OTP-1DVIT2AT-C0-XX-IC OTP-1DVIT2AT-C1-XX-IC OTP-1DVIT2AT-C2-XX-IC OTP-1DVIT2AT-C2D-XX-IC OTP-1DVIT2AT-C3-XX-IC OTP-1DVIT2AT-C3D-XX-IC OTP-1DVIT2AT-L4X3-XX-IC Receiver OTP-1DVIR2AR-C0-XX-IC OTP-1DVIR2AR-C1-XX-IC OTP-1DVIR2AR-C2-XX-IC OTP-1DVIR2AR-C2D-XX-IC OTP-1DVIR2AR-C3-XX-IC OTP-1DVIR2AR-C3D-XX-IC OTP-1DVIR2AR-L4X3-XX-IC For ordering, please substitute “XX” in the model for one of the following optical connectors: ST, FC, SC, or LC. Video Specifications Standards Resolutions Connector Color Depth VGA Video Bandwidth Analog Video Output Level Video Signal-to-Noise Ratio Values DVI 1.0/VESA (see chart on front side) DVI-I (VGA adapter avaiable) 24 Bit 780 MHz 1V p-p >55 dB Optical Specifications Code C0 C1 C2 C2D C3 C3D L4X3 Fiber Type Multimode Multimode Singlemode Singlemode Singlemode Singlemode Singlemode Wavelength 850 nm 1310 nm 1310 nm 1310 nm (D) 1550 nm 1550 nm (D) 1270-1610 nm (CWDM) Optical Budget 7 dB 7 dB 7 dB 12 dB 17 dB 25 dB Varies Distance 100 m 1 Km 10 Km 20 Km 40 Km 60 Km 20-70 Km Chromatic dispersion as well as other losses should also be taken into account Audio Specifications Channels Impedance Audio Levels Frequency Response Signal-to-Noise Ratio Total Harmonic Distortion Connector Type Values 24-Bit Stereo Audio 47k Ohm Unbalanced 2V p-p Max 20 Hz to 20 KHz (±0.1 dB) > 85 dB @ 1KHz (weighted) < 0.1% @ 1KHz 1/8” Stereo Headphone Jack Functional Diagram OTP-1DVIT2AT DVI Input VGA Input 2 Analog Audio Inputs General Specifications Dimensions (Insert Card) OTP-1DVIR2AR Values 6.3”D x 0.8”W x 4.0”H 11 oz. 0˚ to +50˚C -30˚C to +85˚C 0 to 95% non-condensing ~8 Watts 100 K Hours Weight AutoSense DVI Output Opti va® Core Optical Transmitter Optical Recei ver Opti va® Core VGA Output 2 Analog Audio Outputs Operating Temperature Storage Temperature Humidity Power Consumption MTBF Opti va® Daisy-Chain® Processing Opti va® SNMP Opti va® SNMP Opti va® Daisy-Chain® Processing Monitoring & Control Daisy-Chaine d Vi deo/ Audi o/Data Opti va® Insert Car ds Opti vaVie w® SNMP Manage ment Suite Opti vaVie w® SNMP Manage ment Suite Specifications Daisy-Chaine d Vi deo/ Audi o/Data Opti va® Insert Car ds Values Front panel LED status and alert indicators OptivaView® SNMP Management Suite Local Remote FCC Copyright © 2008 Emcore Corporation 858 450 0143 858 450 0155 PART 15 COMPLIANT USA www.emcore.com MADE IN Document Revision 08/14/2008 video-sales@emcore.com