PONA3032-TC02EDC

PRELIMINARY DATA SHEET | MARCH 21, 2008 PONA 3000 Series Erbium Doped Fiber Amplifier Applications • • • • High Performance Supertrunking Links High Power Distribution Networks Fiber Deep Architectures FTTx Networks Features • • • • Full Function High Power Fiber Optic Amplifier Ready for Integration Low Noise Figure (Typ < 6 dB) Total Input Power Range: –10 dBm to +12 dBm Total Output Power: +27 dBm to +35 dBm (Optical Output Power Splitter is Optional For These Units) • • • • • Standard RS-232 Communications Low Electrical Power Consumption Input / Output Isolation > 40/40 dB Polarization Dependant Gain < 0.1 dB Polarization Mode Dispersion < 0.5 ps The EMCORE PONA 3000 Series Fiber Optical Amplifier Module is an ideal building block for OEM system integrators. The family of PONA 3000 Optical Amplifiers is designed to meet the most demanding noise performance requirements of CATV and FTTx applications, and performs all the functions required of an optical amplifier for system integration. Packaged in a convenient 2RU housing, the PONA 3000 series optical amplifiers provide optical isolation on the input and output of the gain block for stable, low noise operation. The input and output optical signal power levels are detected for monitoring and control. The input optical signal is amplified with active gain control for a constant output power level, or with active output power control for constant gain mode. The PONA 3000 series optical amplifiers also provide monitoring functions and associated alarms for all vital characteristics. The optical output of the PONA 3000 series optical amplifiers can be split into number of ports by an optional internal splitter. PONA3000 series includes AC/DC power supply, front panel, optical splitters, network card and all necessary connectors. 1 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com. PRELIMINARY DATA SHEET | MARCH 21, 2008 Specifications PROPERTY Product Code PERFORMANCE Operating Input Power Operating Input Power Output Power Noise Figure Static Gain Flatness Dynamic Gain Flatness Output Power Stability Power Consumption (steady state regime) Remnant pump power to output UNIT LIMIT 3027 Pin (dBm) Pin (dBm) Po (dBm) NF (dB) GF (dB) (dB) (dB) Psys (W) Prp (dBm) Max Min Typ/Max Max Max Max Max Nom. +12 -10 27.0 5.5/6.0 +/-1.0 +/-2.00 +/- 0.25 40 25