AD2412N3L_10

Embedded Power for Business-Critical Continuity AD2412N3L 24 Watts Total Power: Input Voltage: # of Outputs: 24 Watts 90 - 264 Vac Single Rev. 3.3.10_135 AD2412N3L 1 of 2 Electrical Specifications Special Features • Universal AC input • Fully regulated output • EN61000-3-2 compliant • Overcurrent and overvoltage protection • High efficiency • High MTBF • IEC320 AC input receptacle 3 pin (type C14) • Built in EMI filter • (CISPR 22 Class B) • LED power good indicator • AC input fuse • Energy Star 2.0 & CeC approvals • Efficiency Level V • CE Mark EMC & LVD • Meets K.21 Basic Surge requirement Input Input range: Frequency: Inrush current: Input current: Efficiency: EMI/RFI: Safety ground leakage current: 90 - 264 Vac (wide range) 47 - 63 Hz 50 A maximum @ 230 Vac, cold start 25 °C 1 A maximum 82% typical FCC Part 15, Class B & EN55022 (CISPR 22) Class B 250 µA maximum@ 50/60 Hz, 264 Vac input Output 24 W Maximum Power (Po): 20 ms. minimum at full load @ 115 Vac, 60 Hz Hold-up time: Overvoltage protection: 28 V Latching type, recycle AC to reset. Overcurrent protection: Output short circuit protection auto recover Overload protection @ 2.5 - 5A Latching type, recycle AC to reset Thermal protection: Cable/connector : DC cable with 2.5 mm I.D./ 5.5 mm O.D. center plug DC plug center +v DC plug outer -v Environmental Specifications Operating temperature: Storage temperature: Electromagnetic susceptibility: UL 60950-1 CSA-C22.2 no.60950 EN/IEC60950-1 LVD and EMC Certificate Certificate Humidity: MTBF calculated: -5° to +50 °C ambient -45 °C to +85 °C Designed to meet EN61000-4-2, -4, -5, level 3; EN61000-4-3, -6, 6v/m; EN61000-3-3 and EN61000-3-2 Class A Operating; non-condensing 5% to 90% RH > 850,000 hours at full load and 25 °C ambient conditions, Telcordia SR332 Issue 1 (Method 1, Case 3) Safety • UL • CSA • TUV • CE Mark • CCC • CB Embedded Power for Business-Critical Continuity Ordering Information Model Number AD2412N3L Americas Output Voltage 12 Vdc Maximum Power 24 W Minimum Load 0.1 A Maximum Peak Load1 Regulation2 Load 2A 2.4 A ±5% Ripple P/P (PARD)3 < 120 mV 1. Peak current lasting 200ms every 3 seconds. 2. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20MHz bandwidth and 10µF (tantalum capacitor) in parallel with a 0.1µF capacitor at rated line voltage and load ranges. 4. Power supply will opearate with no load 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Rev. 3.3.10_135 AD2412N3L 2 of 2 Europe (UK) Mechanical Drawing 4.13" (105) 47.25" (1200 ) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 1.89" (48) For global contact, visit: www.Emerson.com/EmbeddedPower techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. 1.30" (33) AC INLET MODEL LABEL Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02” (±0.5mm) 3. Warranty: 2 year 4. Weight: 0.61 lb./ 0.28 kg 5. AC input power cord sold separately 6. Specifications at factory settings at 115VAC input, 25 °C unless otherwise stated 7. AC Input Connector: IEC320, C13 Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2010 Emerson Electric Co.