ADN10-24-1PM-C

Embedded Power for Business-Critical Continuity ADN-C Series 120 - 480 Watts Total Power: Input Voltage: # of Outputs: 120-480 Watts 85-264 Vac, 90-375 Vdc Single Rev. 11.3.09_85 ADN-C Series 1 of 3 lim ew S ctor N Fa Form Electrical Specifications Special Features • Slim form factor • Five year warranty • High Efficiency > 90% Typ. • Full Power at 60 °C • Power Boost ™ • Industrial Grade Design • Patented metal mounting clip • Metal case • MTBF > 450,000h demonstrated at 40 °C • Active PFC > 0.92 • Adjustable output • Overvoltage protection with autorecovery • Continuous short circuit and overload protection • SEMI F47 Sag Immunity • New visual diagnostic LED • 3 Status LEDs • Input • Output • Alarm Input AC Input range: DC Input range: Frequency: Efficiency: Inrush current: PFC: Nominal: 115 - 230 Vac 85 - 264 Vac 90-375 Vdc 47-67 Hz, 400 Hz > 90% ADN5-24-1PM-C: ADN10-24-1PM-C: ADN20-24-1PM-C: Active, better than 0.92 < 15 A < 30 A < 40 A Output Nominal voltage: Initial Voltage Setting: Hold-up time: Voltage regulation: Ripple: Back EMF immunity: Power Boost™: Short circuit current: Parallel operation: Ouput Noise suppression: ADN5-24-1PM-C & ADN10-24-1PM-C: 24 Vdc (22.5 - 28.5 Vdc Adj) ADN20-24-1PM-C: 24 Vdc (24-28 Vdc Adj) 24.5 V ± 1% > 20 ms at full load (100 Vac Input @ Tamb = +25 °C) < ± 2% (combination line, load, time and temperature related changes) ADN5-24-1PM-C & ADN10-24-1PM-C: < 50 mVpp ADN20-24-1PM-C: < 100 mVpp < 35 Vdc 1.5 x Nominal current for 4 seconds. 1.5 x Nominal current at near zero volts at short circuit condition Switch selectable single unit or parallel unit operation. Units will not be damaged by parallel operation (regardless of switch position setting) Radiated EMI values below EN61000-6-2 • DC OK Relay • Parallel Operation Capability • Screw terminal connections • RoHS Compliant • No tools required for mounting Safety • UL508, cULus Listed • UL 60950-1, cURus • IEC60950-1 • Class I, Div 2 Hazardous Locations • IP20 • CE Overvoltage protection: > 30.5 Vdc but < 33 Vdc, auto recovery Line and Load regulation: < 0.5% Time and Temperature Drift: < 1% Embedded Power for Business-Critical Continuity Rev. 11.3.09_85 ADN-C Series 2 of 3 General Specifications EMC Emissions: EMC Immunity: Warranty: General protection safety: Status Indicators: EN61000-6-2:2001, EN61000-6-3:2001, Class B EN55011, EN55022 Radiated and Conducted including Annex. A, EN61000-3-2 EN61000-6-1:2001, EN61000-6-2:2001, EN61000-4-2 Level 4, EN61000-4-3 Level 3, EN61000-4-6 Level 3, EN61000-4-4 Level 4 input and level 3 output. EN61000-4-5 Isolation class 4, EN61000-4-11, IEC 61000-4-34 voltage dip immunity standard 5 Years Protected against continuous short-circuit, continuous overload, continous open circuit. Protection Class 1 (IEC536), degree of protection IP20 (IEC60529) Safe low voltage: SELV (acc. IEC60950-1) Visual: 3 status LEDs (Input, Output, Alarm) Relay: N.O. contact rated 200 mA/50 Vdc LED Diagnostics LED • Input • Output • Alarm OK Green Green --Loss of Ac ------Low Ac Yellow Green --No Dc Green --Red High Load Green Yellow Yellow Overload Green Yellow Red Hot Green Green Yellow Too Hot Green --Yellow Environmental Specifications Storage/shipment: Operation (convection): ADN5-24-1PM-C & ADN10-24-1PM-C: ADN20-24-1PM-C: -25 °C to + 85 °C Full Load -10 °C to + 60 °C derate to 50% load at +70 °C Full Load -25 °C to + 60 °C derate to 50% load at +70 °C Up to 50% load permissable with horizontal or on top mounting orientation Other Features External fusing: Mounting orientation: Ventilation: Cooling Spacing Connections: Not required. Unit provides internal fuse (not accessible) Standard: Vertical, Optional: Horizontal or on Top Simple snap-on to DIN TS35/7.5 or TS35/15 rail system Normal convection, No fan required ADN5-24-1PM-C & ADN10-24-1PMC: ADN20-24-1PMC: 15 mm in front, 25 mm above and below, 10 mm left and right 15 mm in front, 40 mm above and below, 10 mm left and right Input: Screw terminals, connector size range: 16-10 AWG (1.5-6 mm2) for solid conductors Output: Two terminals per output, connector size range: 16-10 AWG (1.5-6 mm2) for solid conductors Embedded Power for Business-Critical Continuity Ordering Information Model Number Power Input Voltage 85-264 Vac 90-375 Vdc* Weight Current Case Type ADN5-24-1PM-C 120 W ADN10-24-1PM-C 240 W ADN20-24-1PM-C 480 W *No UL listed for DC input Americas 1.65 lbs (750 g) 5A @ 24 Vdc Metal with patented 1.98 lbs (900 g) 10 A @ 24 Vdc mounting 2.6 lbs (1200 g) 20 A @ 24 Vdc clip MTBF Demonstrated at 40 °C 550,000 hours 450,000 hours 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Rev. 11.3.09_85 ADN-C Series 3 of 3 Europe (UK) Depth 4.37 (111 mm) 4.96 in (126 mm) Dimensions Height ADN5-24-1PM-C ADN10-24-1PM-C ADN20-24-1PM-C 4.85 in (123 mm) Width 1.97 in (50 mm) 2.36 in (60 mm) 3.42 in (87 mm) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) Mechanical Drawing W D 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.PowerConversion.com + + Input Output Alarm OK techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. 24 VDC / 5 A 22.5 - 28/5 Vdc Single Parallel H Emerson Network Power. The global leader in enabling business-critical continuity. ADN5-24-1PM-C AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2009 Emerson Electric Co. C U L US LISTED 115/230 V ~ 2.2/1.0 A 50/60 HZ N L