AEE00C48

10 Watts AEE01,02 Total Power: Input Voltages: No. of Outputs: 10 Watts 48V, 24V Single Electrical Specs Input Input range 18 to 36 VDC 36 to 72 VDC 79% typical (5V) Efficiency Output Voltage tolerance Overall regulation Noise/ripple Transient response ±1.0% (±2.0% for 3.3V) ±1% max 1% (mV P-P) 200 usec typical (50% step load change to within 5%Vo) ±0.02 %Vo/°C 330kHz Special Features • • • • • • • 10 W, Single output 2:1 Input range 1.0" x 2.0" x 0.33 case Replaces AA10B Industry standard package Low Profile Low Cost Temperature Regulation Switching frequency Isolation I/O isolation Isolation Resistance 500 VDC 300 Mohms Environmental Operating base temperature range: -25°C to +95°C Storage temperature: -40°C to +105°C MTBF: 3 Million Hours (Belcore TR332) Safety UL CSA TUV UL1950 Recognition CSA22.2-950 Recognition EN60950 Recognition 2 North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 E UROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Input Voltage 18-36 V 18-36 V 18-36 V 18-36 V 18-36 V 36-72 V 36-72 V 36-72 V 36-72 V 36-72 V Output Voltage 3.3 @ 2.5 A 5.0 @ 2.0 A 8.0 @ 1.25A 12.0 @ 0.84 A 15.0 @ 0.67 A 3.3 @ 2.5 A 5.0 @ 2.0 A 8.0 @ 1.25 A 12.0 @ 0.84 A 15.0 @ 0.67 A Efficiency 76% 78% 78% 82% 82% 77% 79% 77% 84% 86% Model Number AEE02F24 AEE02A24 AEE01L24 AEE00B24 AEE00C24 AEE02F48 AEE02A48 AEE01L48 AEE00B48 AEE00C48 Mechanical Dimensions and Pin Assignments Notes: 1. 20 MHz bandwidth. An external 0.1 uf ceramic capacitor is recommended to be placed from +V out to comm. 2. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. 3. All specifications subject to change without notice. 4. Mechanical drawings are for reference only. www.astec.com Rev:July 03 3