AEQ60Y48N

Astec Industry Standard 60 Amps AEQ/ALQ60 High Efficiency Quarter Brick Total Power: Input Voltages: No. of Outputs: 108W 48V Single Electrical Specs Input Input Range Input Surge Efficiency 36 to 75 VDC 100V /100ms > 90%@1.8V (50% to 100% load) Output Line Regulation Load Regulation Noise/Ripple Remote sense Transient Response ±0.2%Vo ±0.2%Vo 25mV typ Up to 10% of Vo 4% deviation typical 50% to 75% Load change 0.1A/µs Slew Rate 150µs recovery 125% Vo 115% nominal output 480kHz Special Features • High efficiency • Industry standard package 1.45" x 2.30" • Baseplate (AEQ) or Openframe (ALQ) construction • High capacitive load limit on start-up • Remote sense compensation • Regulation to zero load • Fixed frequency switching • Basic insulation • EU Directive 2002/95/EC Compliant for RoHS Overvoltage Protection Current Limit Switching Frequency Control Voltage Adjust Enable 90 to 110% Vo TTL compatible (Positive or Negative enable options) Environmental Operating temperature range: -40°C to +85°C ambient (ALQ - Openframe) -40°C to +105°C baseplate (AEQ - Baseplate) Storage temperature: -40°C to +125°C Overtemperature protection: 115°C PCB temperature (Typical) MTBF: > 1 million hours Safety UL,cUL 60950 TUV EN60950 1 North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 AEQ / ALQ60Y48 Ordering Information Input Voltage 36V to 75V 36V to 75V Output Voltage 1.8V 1.8V Output Current 60A 60A Efficiency Model Number 90% Typ 90% Typ AEQ60Y48(N) - (6)(3)(L) ALQ60Y48(N) - (6)(3)(L) OPTIONS suffix "N" = Negative Logic Enable (without suffix “N” designates Positive Logic Enable) suffix “6” = 3.7mm pin length (5mm nominal default pin length) suffix “-3” = single pair of output pins (Pins 4 and 10 unstuffed) without suffix “-3” = double pair of output pins (Pins 4,5, 9 and 10 are present) suffix “L” = RoHS compliant (RoHS 6) / “Blank” = RoHS compliant with Lead (Pb) in solder exemption (RoHS 5) 2.30 [58.4] Pin Assignments Single Output 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. +Vin Enable - Vin Common Common - Sense Trim + Sense + Vout + Vout Ø 0.040(1.02) Dia Pins 6 places Ø 0.060 (1.52) Dia Pins 4 places 1.45 [36.8] 0.58 [14.7] 0.37 [9.4] 0.25 [6.3] ALQ - Open Frame Series PINASSIGNMENT 1 + VIN 2 Enable (on/off) 3 -VIN 4 -Vout (optional) 5 -Vout 6 -Sense 7 Trim 8 + Sense 9 + Vout 10+ Vout (optional) (OPTIONAL) 1.02 [26.0] 0.73 [18.4] 0.42 [10.8] 2.30 [58.4] 0.43 [10.8] 0.57 [14.6] 0.73 [18.4] All dimensions are in Inches [mm]. Pin placement tolerance 0.005[0.127]. 3 45 6 7 8 9 1.02 [26.0] (OPTIONAL) 1.45 [36.8] 2 1 10 NOTES: ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) PIN PLACEMENT TOLERANCE : ± 0.005(0.127) MECHANICAL TOLERANCE ± .002(0.5) Notes: 1. Nominal values apply with sense pins connected to +Vout and Ground Return with other control pins unconnected. 2. Consult the Technical Reference Notes for more detailed information. 3. Dimensions provided in the mechanical outline are nominal values. 4. At high line, VIN = 75V and no load, VO = 0A, the module requires 1500µF capacitive load to provide greater than 45° of phase margin. 5. Specifications subject to change without notice. 6. 2 Years warranty. 0.15 [3.8] 1.88 [47.7] 2.00 [50.8] MOUNTING INSERT (2 PLCS) M3 X 0.5 THROUGH MAXIMUM SCREW TORQUE 3.9 IN LBS (0.44 N -m 2 .30 [58.4] 0.21 [5.3] Ø 0.040(1.02) Dia Pins 6 places Ø 0.060 (1.52) Dia Pins 4 places 1.03 [26.2] 1.45 [36.8] Astec Industry Standard 1.86 [47.2] 0.22 [5.6] 0.44 [11.2] 0.25 [6.3] 0.65 [16.4] AEQ - Baseplate Series 1.02 [26.0] 0.73 [18.4] 0.42 [10.8] 2.30 [58.4] 0.43 [10.8] 0.57 [14.6] 0.73 [18.4] 3 1.45 [36.8] 2 1 45 6 7 8 9 1.02 [26.0] * Astec reserves the right to make changes to the information contained herein without notice and assumes no liability as a result of its use or application. (REV03: DECEMBER 20, 2006) 0.15 [3.8] 10 1.88 [47.7] 2.00 [50.8] www.astecpower.com 2