APC18T04-9J

60 Watts APC18 (18 Amps) Total Power: Input Voltages: No. of Outputs: 60 Watts 3.0V to 5.5V Single Electrical Specs Input Input range Efficiency 3.0V to 5.5V 3.3V @ 95% (Typ) Control Enable TTL compatible (positive enable) Output Regulation (Line, Load, Temp) Load Current 1 million hours Safety UL, cUL 609500 Recognized (Pending) TUV EN60950 Licensed (Pending) 2 North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Input Voltage 3.0V - 5.5V Output Voltage 0.75 to 3.6V Output Current Efficiency Full Load (Typ) 95% Model Number APC18T04-9(J) 18A Note: - 18A max output current with total output power limited to 60W - minimal output derating required - Typical Efficiency for 3.3V output; full load; nominal input voltage; 200LFM at TA=25 ºC - Suffix “J” designates tray packaging, non “J” is T&R Pin Assignment Mechanical Dimensions Notes: 1. 200uF and 2x 150uF input and output capacitance required. 2. All specifications are typical at nominal line, full load and 25°C ambient temperature unless otherwise noted. 3. All specifications subject to change without notice. Mechanical drawings are for reference only 4. Technical Reference Notes should be consulted for detailed information 5. Warranty: 1yr VIN GND VO TRIM SENSE PIN SIDE UP VIEW ENABLE Recommended PAD Layout PAD Size MIN: 1.6 x 2.8 mm [0.065 x 0.110 inches] REC: 1.8 x 2.8 mm [0.070 x 0.110 inches] MAX: 2.0 x 3.0 mm [0.080 x 0.130 inches] PIN SIDE DOWN VIEW * Astec reserves the right to make changes to the information contained herein without notice and assumes no liability as a result of its use or application. (REV A: SEPTEMBER 1, 2004) www.astecpower.com 3