AUD02A48

Embedded Power for Business-Critical Continuity AUD Series 10 Watts Total Power: 10 Watts Input Voltage: 36V - 75V # of Outputs: Single Rev. 09.23.05 AUD Series 1 of 2 Electrical Specifications Input Input range Special Features • Ultra Low Profile - 4.3mm • Efficiency - 89% @ 5V • -40°C to +85°C Operating temperature(Ambient) • Open Frame SMT • Low output ripple and noise • Regulation to zero load • CISPR22, Class A for Conduct and Radiated EMI • Parallel Application • Pb-free reflow compatible and ROHS compliant Efficiency 36 - 60 VDC 36 - 75VDC (forced air 0.5m/s) 89% @ 5Vo +5%, -3% 50mV p-p 120% of Vonom (latch-up) 3.6A for 1.5V 3.1A for 1.8V - 3.3V 2.1A for 5V 90% of Vonom (latch-up) 1500VDC ON: RC pin connected to -Vin or open OFF: RC pin connected to +Vin Output Line / Load Regulation Noise / Ripple OVP OCP LVP Isolation Control Enable Environmental Specifications Ambient Operating temperature Storage temperature -40°C to +85°C (forced air 0.2m/s) -45°C to +90°C Safety UL CE 60950 CE Mark Embedded Power for Business-Critical Continuity Ordering Information Input Voltage 48V 48V 48V 48V 48V Output Voltage 1.5V @ 3.5A 1.8V @ 3A 2.5V @ 3A 3.3V @ 3A 5.0V @ 2A Efficiency 82% (Typ) 84% (Typ) 86% (Typ) 88% (Typ) 89% (Typ) Model Number AUD03M48 AUD03Y48 AUD03G48 AUD03F48 AUD02A48 Astec Power 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Technical Support: +1 888 41 ASTEC or +1 407 241 2752 2.17+/-0.5 Rev. 09.23.05 AUD Series 2 of 2 Pin Assignment Marking of No.1 pin 1 2 3 20 19 18 OUTPUT= G . H V J K L A 1.5+/-0.2 0.25+/-0.1 P Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 0to10de 1.3+/-0. P AUD0 E F 48 INPUT=36-60VDC 27.2+/-0.5 4 5 6 A BCD (4P) 17 P 10.3+/-0.2 16 15 14 13 P P P 0.55 -0.15 +0.1 US 12 C P Units 2111-2116, Level 21 Tower 1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: +852 2437 9662 Facsimile: +852 2402 4426 P 10 11 (2.17) P For global contact, visit: 37.3+/0.5 www.astecpower.com technicalsupport@astec.com Label While every precaution has been taken to ensure accuracy and completeness in this literature, Astec Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Printed in US A Coplanarity Max0.1mm 39.9+/-0.6 4.3max Pin Assignments Pin No Symbol Function Pin No Symbol ALM RC PO NC +Vin +Vin -Vin -Vin Function Alarm output Remote on/off control Parallel operation +Input +Input -Input -Input 1, 10, 11, NC 2 +Vout 3 4 5 6 +Vout +Vout -Vout -Vout Mechanical supplemental contact pins 12 +Output 13 +Output +Output -Output -Output 14 15 16 17 18 19 Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2005 Emerson Electric Co. Note: Astec reserves the right to make changes to the information contained herein without notice and assumes no liability of its use and application.