BXA10-48S05J

Embedded Power for Business-Critical Continuity BXA10 Series Single and dual output Total Power: 8 - 10W Input Voltage: 9 - 18VDC 18 - 75VDC # of Outputs: Single Rev.03.07.07 bxa10 1 of 4 Special Features • 1 x 2 x 0.395 inch package with stand-offs • 13.3 Watts/in3 power density • CISPR22 and EN55022 conducted emission level A • UL, CSA and VDE approvals (48V input only) • Continuous short circuit protection • Optional remote ON/OFF • Available RoHS compliant • 2 year warranty The BXA10 series of dc-dc converters, comprising 7 different models, is designed for a wide range of applications including communications, industrial systems and mobile battery powered systems. Packing up to 10 Watts of power into a 2 x 1 x 0.395 inch package, with efficiencies as high as 85%, the BXA10 has wide input ranges of 9 Vdc to 18 Vdc and 18 Vdc to 75 Vdc, and is available in single and dual output versions. Isolation of 1500 Vdc, approval to EN60950 2nd edition, coupled with reduced conducted noise for simplified compliance to FCC Part 15 level A and EN55022 level A, make the BXA10 ideal for telecommunications and distributed power applications. Other features include overvoltage protection, continuous short circuit protection with automatic recovery and remote on/off, all of which minimize the need for external circuitry and make the BXA10 a recommended component in distributed power systems. Safety VDE0805/EN60950/IEC950 File No. 10401-3336-0084 Licence No. 1812 UL1950 File No. E174104 CSA C22.2 No. 950 File No. LR41062C Embedded Power for Business-Critical Continuity Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated. Rev.03.07.07 bxa10 2 of 4 OUTPUT SPECIFICATIONS Line regulation Load regulation Minimum load Overshoot Ripple and noise (See Note 2) Transient response LL to HL, single output LL to HL, dual output 10% to 100% FL (See Note 4) 48 V models 12 V models At start-up 5 Hz to 20 MHz 25% load step ±0.2% ±0.2% ±0.5% EMC CHARACTERISTICS Conducted emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity GENERAL SPECIFICATIONS Efficiency Isolation voltage Switching frequency Approvals and standards Case material Material flammability Weight 12 Vdc (See Note 6) 48 Vdc 9-18 Vdc 18-75 Vdc Pi type Resistive load 1.5 A max. Open collector compatible High impedance >400 kΩ Low impedance