HPS10X-A3N-001

HPS10X-A3N-001

  • 厂商:

    EMERSON-NETWORKPOWER(艾默生)

  • 封装:

  • 描述:

    HPS10X-A3N-001 - HPS10/12/15 Series - Emerson Network Power

  • 详情介绍
  • 数据手册
  • 价格&库存
HPS10X-A3N-001 数据手册
1000-6000 Watts HPS10/12/15 Series Electrical Specs Input Input voltage Frequency Inrush current Efficiency Power factor Turn-on time 85-264 VAC* 47-440 Hz 40 A peak max. 85% typ @ full case load 230 VAC 0.99 typical meets EN61000-3-2 AC on 1.5 sec. typical, Inhibit / Enable 100 ms typical CISPR 22 EN55022 Level “B” 2 mA max @ 264 VAC @ 60Hz (per module) CISPR 22 EN55022 Level “B” 20 ms minimum (independent of input VAC) >5 ms early warning min. before outputs lose regulation; Full cycle ride thru (50 Hz) Meets EN61000-3-2 Meets EN60950 Special Features • • • • • • • • • • • • • • • • • • • • • • • • • • Integrated OR-ing diode Remote Sense on Bulk output Overload protection on all outputs Active Inrush limiting PFC to 0.99 typical EN61000-3-2 CISPR22, EN55022 Curve B conducted/radiated EMI EN61000 immunity standards Optional 48 W fan voltage (12 V or 24 V) Standard 5 V at 5 A standby voltage (3.3V option) No minimum load Overvoltage protection Input OK signal and indicator LED Inhibit/Enable Remote Margin/Voltage Programming Optional current monitor Optional AC Line discrimination Output Good signal and indicator LED Temp good signal and indicator LED Optional single wire digital temp monitor 2 Optional module I C interface Optional Rack µController Hot Plug N+1 Redundant Standard Optional fan fail signal Module present signal Optional short circut latch EMI filter standard Leakage current standard Radiated EMI Holdup time AC OK Harmonic distortion Isolation * see modules table on the next page Output Margining Overall reg Ripple Dynamic response Recovery time Overcurrent protection Short circuit protection Overvoltage protection Reverse voltage protection Thermal protection Remote sense Single wire parallel DC OK Minimum load Standby voltage Global Inhibit/Enable ±5% of nominal 1% 1% of Vout Pk-Pk limited to 20 MHz 2% with 25% load step To within 1% in
HPS10X-A3N-001
物料型号: - HPS10、HPS12、HPS15系列,分别对应1000瓦、1200瓦和1500瓦的模块型号。

器件简介: - 这些是高效率、高功率因数的开关电源模块,具有集成OR-ing二极管、远程感测、过载保护等特性。

引脚分配: - 输入电压引脚包括火线(LINE)、零线(NEUTRAL)、地线(GROUND)。 - 输出引脚包括多个V OUT(输出电压)、RTN(返回)、5VDC(5伏直流)、DATA(数据)、I MONITOR(电流监控)等。

参数特性: - 输入电压范围85-264VAC,频率47-440Hz。 - 功率因数达到0.99,满足EN61000-3-2标准。 - 效率85%典型值,全负载230VAC。 - 启动时间AC开启1.5秒,EMI滤波满足CISPR 22 EN55022 Level "B"。

功能详解: - 具备主动限流、PFC、远程电压编程、可选的电流监控、过压保护等功能。 - 支持N+1冗余标准,热插拔功能。

应用信息: - 适用在需要高功率、高效率的电源应用场合,如服务器、通信设备等。

封装信息: - 模块最大尺寸为5.04x3.83x12.5英寸,每机架最多可安装4个模块,重量为10.5磅。
HPS10X-A3N-001 价格&库存

很抱歉,暂时无法提供与“HPS10X-A3N-001”相匹配的价格&库存,您可以联系我们找货

免费人工找货