LPS174

Embedded Power for Business-Critical Continuity LPS170-M Series Medical 175 Watts Total Power: Input Voltage: # of Outputs: 100 - 175 Watts 85-264 VAC 120-300 VDC Single Rev. 12.08.08_113 LPS170-M Series 1 of 3 Electrical Specifications Special Features • • • • • • • • • • • • • • • Medical safety approvals Active power factor correction IEC EN61000-3-2 compliance Wide Range Adjustable output Remote sense on main output Single wire current sharing Power fail and remote inhibit Built-in EMI filter Low output ripple Overvoltage protection Overload protection Thermal overload protection DC power good 5 V standby output 12 V Aux output Optional cover (-C suffix) Input Input range: Frequency: Inrush current: Efficiency: EMI filter: 85-264 VAC; 120-300 VDC 47-67 Hz 38 A max, cold start @ 25 °C 75% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted 0.99 typical 550,000 hours at full load and 25 °C ambient conditions Mating Connectors AC Input (SK4): Molex 09-50-8051 (USA) Molex 09-91-0500 (UK) PINS: 08-58-0111 Molex 90142-0010 (USA) PINS: 90119-2110 or Amp: 87977-3 PINS: 87309-8 DC Outputs (SK3): Molex 19141-0058 Control Signals (SK1): Ordering Information Model Number Output Voltage Minimum Maximum Load with Load Convection Cooling 0 A 0 A 0A 0A 22 A 9.1 A 7.3 A 4.5 A Maximum Load with 30CFM Peak Load 1 Regulation 2 forced Air 35 A 15 A 12 A 7.5 A 38 A 16.5 A 13.2 A 8.2 A ±2% ±2% ±2% ±2% Ripple P/P (PARD)3 50 mV 120 mV