LPX200

Embedded Power for Business-Critical Continuity LPX200 Enclosure Installation Notes LPX200 • Cover Enclosure Kit LPX200 will fit the LPX20X-M power supplies. OUTPUT CONNECTOR Rev. 12.9.09_153 LPX200 Enclosure 1 of 2 INPUT CONNECTOR Materials • 1 Base • 1 Cover • 4 M3x6mm Pan head screws with spring washer • 4 M3x6mm countersunk screws • 1 M4 nut • 1 M4 star washer • 1 M4 spring washer • 1 Plastic insulator sheet INSULATOR GROUND STUD (4X)STANDOFF Installation Instructions and Notes 1. 2. 3. 4. 5. 6. 7. 8. 9. Place the insulator over the chassis as shown. Place the power supply over the insulator as shown. Align the power supply to the chassis standoff. Secure 4 pan head screws with washer provided with in kit as shown. Place the cover over the power supply as shown. Align the cover to the U-bracket countersink holes. Secure 4 countersink screws provided with in kit as shown. Overall dimensions: 5.9” (150mm) x 3.85” (98mm) x 1.85” (46.9mm). Base plate has three sets of customer mountings: a. Bottom mounting (4X) M3 inserts. Max. screw penetration 0.0787 (2mm)plus 2 key ways. (See keyway detail) b. Side mounting (4X) M3 inserts. Max. screw penetration 0.236 (6mm) 10. Ensure insulator is correctly fitted in base under PCB to maintain safety creepage and clearances. 11. Ensure base is firmly connected to supply earth via the earth stud marked 12. When using this enclosure, ensure that relevant safety standards (e.g. EN60950) are complied with, in respect to creepage and clearance distances, and distances through insulation. 13. All dimensions are in inches (mm) Embedded Power for Business-Critical Continuity Mechanical Drawing (2X)M3 INSERT Americas 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Rev. 12.9.09_153 LPX200 Enclosure 2 of 2 Europe (UK) 5.9 [150] Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 2.56 [65] 3.85 [98] Asia (HK) 0.98 [25] 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 1.18 [30] 4.33 [110] (2X)M3 INSERT 0.98 [25] For global contact, visit: www.PowerConversion.com techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. 1.85 [46.9] 0.78 [19.9] 0.59 [15] Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity 1.08 [27.6] 3.54 [90] DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. 0.36 [9.3] 3.15 [80] 3.75 [70] 3.14 [80] 0.35 [9] 0.55 [14.0]