MTC600-48RR16S1J

Embedded Power for Business-Critical Continuity SXX06E Rev. 08.01.06 Page 1 of 2 MicroTCA MTC600 Series 600 Watts Total Power: # of Channels: 600 Watts 16 Rev. 05.26.08 MTC600 Series 1 of 19 Product Description General Special Features • 600 W output power • 16 Channels of • 12 V @ 7.6 A max • 3.3 V @ 150 mA max • Supports: • 12x AMC's • 2x MCH's • 2x CU's • Supports N+1 output redundancy, N≤3 • Supports 1+1 input redundancy The MTC600 series of Power Modules are designed for use in MicroTCA systems and can support shelves, cube and other implementations and is compliant to PICMG MicroTCA .0 Revision 1.0 specification. The MTC600 Power Modules implement the functionality necessary to power, manage and protect a MicroTCA system comprising up to: • 12x AdvancedMCs • 2x MicroTCA Carrier Hubs • 2x Cooling Units The MTC600 Power Modules will: • On system bring-up, provide the power necessary for MCH and CU system elements. • Support redundant IPMI (IPMB-0) communication with the MCH/ Carrier-Manager • Under the command of the carrier manager, enable and provide power to AMCs, CUs and additional MCHs • Monitor and Report power system status and conditions of operation • Manage and isolate faults affecting the power system Compliance • PICMG MicroTCA.0 (Revision 1.0) • PICMG HPM.1 Firmware Upgrade (Revision 1.0) Safety UL, cUL 60950-1 CSA 60950-1 VDE 60950-1 Embedded Power for Business-Critical Continuity Product Description (continued) Input Rev. 05.26.08 MTC600 Series 2 of 19 Power Module Input Connector -48V_A Power Module Input Connector -48V_B Fusing ORing EMI EMI Filtering EMI Filtering Transient Suppression Transient Suppression Inrush Limiting Inrush Limiting Holdup Holdup Power Conversion 12V 3.3V Monitoring & Control MCH (2X) Power MCH Channel Power PWR MP EN# PS1# PWRON PWR MP EN# PS1# PWRON CU (2x) CU Power Channel Power PPWR MP EN# PS1# WR MP EN# PS1# AMC (12x) AMC Power Channel Power PWR MP EN# PS1# PWR MP EN# PS1# IPMB-0 IPMB -0 PM to PM PM to Comm Comm JTAG JTAG Power Module Output Connector Embedded Power for Business-Critical Continuity Electrical Specifications Input -48 Vdc Models Input Range (Operating) Input Range (Non-operating) Input Fusing Input ORing Inrush Current Input Current Holdup Time -39.5 to -72 Vdc 0 to -39.5 Vdc -72 to -75 Vdc Internal 24 A Fuses Internal ≤80 A 12.8 A 18.2 A 5 ms 7 ms 10 ms 10 ms 39.5 ±1.0 V 37.0 ±1.0 V Included Rev. 05.26.08 MTC600 Series 3 of 19 Supports -48 V and -60 V battery plants Power Module may or may not operate in part of this range, but will not be damaged In both A & B feeds and A & B return lines In both A & B feeds and A & B return lines For t < 1 ms Typical with 600 W out, -54.0 Vin Maximum with 600 W out, -39.5 Vin Minimum at 600 W with one PM Typical at 600 W with one PM Typical at 400 W with one PM Minimum at 600 W with two PMs Turn-On voltage Turn-Off voltage Protected against reverse polarity over magnitude of specified input range Supports typical worldwide single-phase inputs Power Module may or may not be operating in part of this range, but will not be damaged UnderVoltage Lockout Reverse Polarity Protection AC Models Input Range (Operating) Input Range (Non-operating) Frequency Input Fusing Inrush Current Power Factor Harmonics Input Current Holdup Time UnderVoltage Lockout OverVoltage Lockout 90 to 264 Vac 0 to 90 Vac 264 to 282 Vac 47 to 63 Hz Internal 15 A Fuses ≤45 A 0.99 typical