NPS63-M

Embedded Power for Business-Critical Continuity NPS60-M Series 60 Watts Total Power: Input Voltage: # of Outputs: 60 Watts 90 - 264 VAC 127 - 300 VDC Single Rev.05.18.11_184 NPS60-M Series 1 of 3 Special Features • Medical and ITE Safety Approvals • Universal input • Less than 1U high • 2” x 4” footprint • Remote sense • Overload and short circuit protection • Adjustable output voltage • High efficiency • High MTBF • Built in EMI filter (CISPR 22 Class B) • International Efficiency Level V, Energy Star 2.0 & CeC compliant (except NPS62-M) • Less than 300 mW no-load power consumption • 0˚C to +80˚C operation • Input power < 74 watts • Complies with EN61000 -3-2 • UL Class I approved • Class II approved (with Class A EMI) • LPX50 enclosure kit available • Dual AC fuses Electrical Specifications Input Input ra ge: n Frequency: Inrush current: Input power: Efficiency: EMI/RFI: Safety ground leakage current: 90 - 264 VAC (wide range) 127-300 Vdc 47 - 63 Hz < 50 A peak @ 230 VAC, cold start @ 25° C < 74 Watts 87% average (as per Energy Star 2.0 standard) (NPS62-M, 80%) FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted 275uA @ 50/60 Hz; 264 VAC input Output Maximum power: Adjustment range: Hold-up time: Overload protection: 60 W for convection ± 20% minimum 10/ 0 ms 115/230 VAC input line 2 Short circuit protection on all outputs. Case overload protected @ 110-160% of normal rating Overvoltage protection: 30-50% above nominal output Remote sense: Compensated for 0.5 V lead drop max. Will operate without remote sense connected. Reverse connection protected. Safety • TUV: 60950, 60601-1 • UL: 60950, 60601-1 • CSA: 60950, 60601-1 • NEMKO: 60950, 60601-1 • CB: Certificate and report • CE: Mark (LVD) • CCC: Mark Embedded Power for Business-Critical Continuity Environmental Specifications Operating temperature: 0° to 50 °C ambient derate each output at 2.5% per degree from 50° to 80 °C. -20 °C start up Storage temperature: -45 °C to +85 °C Electromagnetic susceptibility: Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity: Vibration: MTBF demonstrated: Operating; non-condensing 10% to 90% RH IEC68-2-6 to the levels of IEC721-3-2 > 550,000 hours at full load and 25 °C ambient conditions Rev.05.18.11_184 NPS60-M Series 2 of 3 Mechanical Drawing BARCODE SERIAL LABEL 4.00" (101.6) 3.73" (94.6) VR1 OUTPUT VOLTAGE ADJUST POT 0.86" (22 max) M1 PIN 1 SK2 PIN 8 SK1 PIN 2 INPUT CONNECTOR (SK1) 0.16” (4.0) MOUNTING HOLE (4 PLACES) MODEL LABEL ROHS LABEL M2 6 PINS OUTPUT CONNECTOR (SK2) 0.197” (5.0) MINIMUM STANDOFF HEIGHT 1.01" (25.6) 1.72" (43.8) PIN 1 2.00" (50.8) GND TAB (CN1) Embedded Power for Business-Critical Continuity Ordering Information Model Number NPS62-M NPS63-M NPS65-M Output Voltage 5 V 12 V 24 V Minimum Load 0 A 0 A 0 A Maximum Load with Convection Cooling 11 A 5 A 2.5 A Peak Load1 13 A 5.5 A 2.75 A Regulation2 ± 2% ± 2% ± 2% Ripple P/P (PARD)3 50 mV 120 mV 240 mV Americas 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Rev.05.18.11_184 NPS60-M Series 3 of 3 Europe (UK) 1. Peak current lasting < 15 seconds with a maximum 10% duty cycle. 2 . At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3 . Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) Pin Assignments Connector SK1-1 SK1-3 SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 NPS62-M Line Neutral +5 V +5 V Common Common -Sense +Sense NPS63-M Line Neutral +12 V +12 V Common Common -Sense +Sense NPS65-M Line Neutral +24 V +24 V Common Common -Sense +Sense 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.Emerson.com/EmbeddedPower techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Mating Connectors AC Input: Molex 09-50-8031 (USA) 09-93-0300 (UK) PINS: 08-52-0113 DC Outputs: Molex 09-50-8061 (USA) 09-93-0600 (UK) PINS: 08-52-0113 Emerson Network Power Connector Kit #70-841-006, includes all of the above Notes: 1. Specifications subject to change without notice. 2 . All dimensions in inches (mm), tolerance is ±0.02” (±0.5mm) 3. Mounting holes M1 and M2 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 VAC input, 25 °C unless otherwise stated. 6. For DC input an external DC safety rated fuse must be used 7. Warranty: 2 year 8. Weight: 0.26lbs/0.118kg Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co.