SIL05E-05W3V3-VJ

SIL05E Series DC-DC CONVERTERS • • • • • • • E Class Non-isolated 3 Vin to 5.5 Vin single output 1 NEW Product 5 A Current rating Input voltage range: 3.0 Vin to 5.5 Vin Output voltage range: 0.75 Vdc to 3.63 Vdc Ultra high efficiency: 94% @ 5 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >9 million hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Industry standard footprint • Available RoHS compliant The SIL05E series are non-isolated dc-dc converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from a 3.3 Vin to 5 Vin source. The SIL05E has a wide input range (3.0 Vdc to 5.5 Vdc) and offers a wide 0.75 Vdc to 3.63 Vdc output voltage range with a 5 A load, which allows for maximum design flexibility and a pathway for future upgrades. The SIL05E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SIL05E offers compact size and efficiencies of up to 94%. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability Setpoint accuracy Line regulation Load regulation Minimum load Overshoot/undershoot Ripple and noise 5 Hz to 20 MHz Temperature co-efficient Transient response 0.75-3.63 Vdc ±0.4% ±1.0% ±1.0% 0A None 75 mV pk-pk 25 mV rms ±0.01%/ºC 60 mV max. deviation 50 µs recovery to within 1% EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Approvals and standards Material flammability Dimensions Weight (LxWxH) Fixed 94% typ. Non-isolated 300 kHz typ. EN60950 UL/cUL60950 UL94V-0 0.902 x 0.279 x 0.402 inches 22.90 x 7.09 x 10.21 mm 2.5 g (0.09 oz) Telcordia SR-332 9,009,000 hours INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple Remote ON/OFF Start-up time No load (max.) 3.0-5.5 Vdc 150 mA 3.9 A max. @ Io max. and Vout = 3.3 V 40 mA rms (See Note 1) 20 ms MTBF ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 2) Operating ambient, temperature Non-operating -40 ºC to +85 ºC -40 ºC to +125 ºC PROTECTION Short-circuit Thermal Continuous Automatic recovery International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 File No. E174104 TÜV Product Service (EN60950) Certificate No. B 03 10 38572 037 CB report and certificate to DE3-51686M1 File Name: sil05e_05.pdf Rev (04): 16 Dec 2005 SIL05E Series DC-DC CONVERTERS E Class Non-isolated OUTPUT POWER (MAX.) 18.15 W INPUT VOLTAGE 3.0-5.5 Vin OUTPUT VOLTAGE 0.75-3.63 Vdc OUTPUT CURRENT (MIN.) 0A 3.0-5.5Vin single output 2 NEW Product For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT (MAX.) 5A EFFICIENCY (TYP.) 94% REGULATION LINE ±1.0% LOAD ±1.0% MODEL NUMBER (3,4,5) SIL05E-05W3V3-VJ Part Number System with Options SIL05E-05W3V3-VJ Packaging Options (4) J = Pb-free (RoHS 6/6 compliant) Mounting Option V = Vertical H = Horizontal Output Voltage 0.75 Vdc to 3.63 Vdc Product Family SIL = Single In Line Rated Output Current 05 = 5 Amps Performance E = Enhanced Performance Input Voltage 05 = 3.0 Vdc to 5.5 Vdc Type of Output W = Wide Output Voltage Adjustment of the SIL05E-05W3V3 Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL05E-05W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.75 Vdc to 3.63 Vdc. When the SIL05E-05W3V3 converter leaves the factory the output has been adjusted to the default voltage of 0.75 V • When Vin ≥ 4.5 V, then Vout can be adjusted from 0.75 Vdc to 3.63 Vdc • When Vin < 4.5V, then Vout can be adjusted from 0.75 Vdc to 2.75 Vdc Notes 1 The SIL05E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground The following conditions apply for the SIL05E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off >2.5 V] Converter Operation Unit is ON Unit is ON Unit is OFF 2 3 4 5 An ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘R’ towards the end of the model number e.g. SIL05E-05W3V3-VRJ. Full derating curves available in both the Longform Datasheet and Application Note. For horizontal mounting option please consult factory for details. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. File Name: sil05e_05.pdf Rev (04): 16 Dec 2005 SIL05E Series DC-DC CONVERTERS E Class Non-isolated 3.0-5.5Vin single output 3 NEW Product For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.902 [22.90] 0.279 [7.09] 0.402 [10.21] 5 4 3 2 1 0.050 [1.27] 0.100 [2.54] 0.025[0.64] x 0.025[0.64] Connector 5 places 0.150 [3.81] 0.600 [15.24] 0.700 [17.78] 0.800 [20.32] All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) unless otherwise stated PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 FUNCTION Vout Trim GND Vin Remote ON/OFF Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items:  Application Note  Longform Datasheet www.artesyn.com File Name: sil05e_05.pdf Rev (04): 16 Dec 2005