SIP20C-05S1V5J

SIP20C Series DC-DC CONVERTERS • • • • • • • • • • Updated version of SIP20 Best-of-class wide output trim range Industry standard footprint High power density (60 W/in3) High Efficiency 90% Fixed frequency (500 kHz) Remote ON/OFF Undervoltage lockout (UVLO) Remote sense option Available RoHS compliant Single output 9-20 W Non-isolated DC-DC Regulators 1 The SIP20C series are non-isolated dc-dc converters packaged in a single-in-line footprint (2.5 x 0.55 x 0.23 inches) giving designers a cost effective solution for conversion of 5 Vdc to 3.3 Vdc and lower voltages. The SIP20C offers a best-of-class wide output trim range which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SIP20C from existing 5 V system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SIP20C is designed for applications that include distributed power, workstations, computers and file servers. Implementing state of the art surface mount technology and automated manufacturing techniques, the SIP20C offers compact size and efficiencies of 90%. The SIP20C is an updated version of the original SIP20 and is fully compatible with the original model. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated (4) 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability S3V3J S2V5J S1V5J (See Note 1) Vin = 4.5-5.5 V Io = 0-6 A 60% to 115% 60% to 110% 87% to 130% ±2.7% ±0.3% ±0.3% 0A None 0 to 20 MHz BW 100 mV pk-pk, 30 mV rms max. ±0.01%/°C ±2.0% max. deviation 300 µs recovery to within ±1.0% (See Note 6) 0.5 Vdc compensation EMC CHARACTERISTICS Radiated emissions Electrostatic discharge EN55022/11, FCC part 15 EN61000-4-2, IEC801-2 Level A GENERAL SPECIFICATIONS Efficiency Isolation voltage Switching frequency Approvals and standards (See Note 7) Material flammability Dimensions Pin length Weight MTBF MIL-HDBK-217F (LxWxH) Fixed See table Non-isolated 500 kHz typ. VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 UL94V-0 63.5 x 13.97 x 5.84 mm 2.5 x 0.55 x 0.23 inches Set point accuracy Line regulation Load regulation Minimum load Overshoot/undershoot Ripple and noise (See Note 8) Temperature coefficient Transient response (See Note 2) Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current Input reflected ripple Remote ON/OFF Start-up time External capacitor 0.135 ±0.02 inches (3.43 ±0.5 mm) 5 g (0.18 oz) >1,000,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance 4.5 to 5.5 VDC No load @ Io max. and Vin = 0-5.5 V (See Note 3) 150 mA 5.3 A max. Altitude 200 mA (See Note 5) 1.0 ms (See Note 4) 100 µF Vibration Operating ambient, See curve convection cooled Operating ambient, -25 °C to +85 °C 300 LFM forced air See Curve Non-operating -55 °C to +100 °C Operating Non-operating 5-500 Hz 10,000 feet max. 40,000 feet max. 2.4G rms (approx.) International Safety Standard Approvals VDE0805/EN60950/IEC950 File No. 126328 UL1950 File No. E174104 CSA 22.2 No. 950 and CB Report and Certificate to DE1-31667 File Name: sip20c.pdf Rev (01): 16 Dec 2005 SIP20C Series DC-DC CONVERTERS OUTPUT POWER (MAX.) 20 W 15 W 9W Notes 1 Single output 9-20 W Non-isolated DC-DC Regulators 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm INPUT VOLTAGE 4.5-5.5 Vdc 4.5-5.5 Vdc 4.5-5.5 Vdc OUTPUT VOLTAGE 3.3 V 2.5 V 1.5 V OUTPUT CURRENT (MIN.) 0A 0A 0A OUTPUT CURRENT (MAX.) 6A 6A 6A EFFICIENCY (TYP.) 90% 82% 75% PROTECTION Short-circuit Input surge Undervoltage Thermal Continuous (See Note 9) 6 Vdc continuous max. UVLO Vin