SMT06C-05SADJJ

Embedded Power for Business-Critical Continuity SMT06C Series 5 Vin and 12 Vin single output Rev. 08.20.08_j93 SMT06C 1 of 4 Total Power: 20W Input Voltage: 4.5-5.5 Vdc or 10.2 - 13.8 Vdc # of Outputs: Single Electrical Specifications Special Features • 6 A current rating • Input voltage range: 4.5 Vdc - 5.5 Vdc or 10.2 Vdc - 13.8 Vdc • Output voltage range: 0.9 Vdc - 3.3/5.0 Vdc • Industry leading value • Cost optimized design • Excellent transient response • Output voltage adjustability • Pathway for future upgrades • Supports silicon voltage migration • Resulting in reduced design-in and qualification time • Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 • Available RoHS compliant • 2 year warranty Output Voltage adjustability (see note 6) 5 V input models 12 Vins Output setpoint accuracy 1.0% trim resistors Line regulation Load regulation Min/max load Overshoot (at turn on) Undershoot Ripple and noise 5 Hz to 20 MHz Transient response (see note 1) 5 V input models 12 V input models At turn-off (See note 2) Low line to high line Full load to min. load 0.9 - 3.3 Vdc 0.9 - 5.0 Vdc ±2.5% ±0.2% ±0.5% 0A/6A 3.0% max. 1.0% max. 100 mV max. See table on page 2 75 mV max. deviation 150 μs recovery to within regulation band Safety UL/cUL : CAN/CSA 22.2 No. 60950 TÜV Product Service (EN60950:2000) CB report and certificate Embedded Power for Business-Critical Continuity All specifications are typical at nominal input, full load at 25°C unless otherwise stated. Rev. 08.20.08_j93 SMT06C 2 of 4 Input Input voltage range Input current Input current (max.) (see note 8) Input reflected ripple (see note 2) Remote ON/OFF Logic compatibility ON OFF Start-up time (see note 3) Power up Remote ON/OFF Turn ON threshold Turn OFF threshold 5 Vin 12 Vin 5 Vin 12 Vin See table on page 2 Fixed (See note 4) 200 kHz. TÜV product Services IEC69050, UL/cUL60950 UL94V-0 9.3 g (0.3 oz.) 150 µm Telcordia SR-332 7,562,142 hours 5 V input model 12 V input model Minimum load Remote OFF 5 V input model 12 V input model 5 Vin 12 Vin 4.5 - 5.5 Vdc 10.2 - 13.8 Vdc 50 mA 5 mA 5.1 A max. @ lo max. 1.6 A @ lo max. 52 mA (pk-pk) 56 mA (pk-pk) Positive logic >2.4 Vdc