SMT30E-12W3V3J

Embedded Power for Business-Critical Continuity SMT30E Series Rev.11.07.08_94 SMT30E 1 of 5 12 Vin single output Total Power: 99W Input Voltage: 8-14 Vdc # of Outputs: Single Special Features • 30 A current rating • Input voltage range: 8 Vdc to 14 Vdc • Output voltage range: 0.8 Vdc to 3.63 Vdc • Ultra high efficiency: 91% @ 12 Vin and 3.3 Vout • Extremely low internal power dissipation • Minimal thermal design concerns • Designed in reliability: MTBF of 3,289,053 hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Industry standard surface-mount footprint • Available RoHS compliant • 2 year warranty Electrical Specifications Output Voltage adjustability: Setpoint accuracy: Line regulation: Load regulation: Total error band: Overshoot / undershoot: Ripple and noise: Transient coefficient: Transient response: Slew rate = 0.5 A µs 0.8 - 3.63 Vdc ±1.3% typ. ±0.2% typ. ±1.5% typ. ±3.0% typ. None 5 Hz to 20 MHz ±0.01% / ºC typ. 1.5 Vout 50% to 75% load step 3% max. deviation 10 µs recovery to within ±1.0 60 mV pk-pk 25 mV rms Safety • • • • UL/cUL CAN/CSA 22.2 No. EI74104 UL 60950 File No. EI74104 TÜV Product Service (EN60950) Certificate No. B05 06 38572 055 CB report and certificate to IEC60950 Embedded Power for Business-Critical Continuity Input Input voltage range: Input current: Input current (max.): Input reflected ripple: Remote ON/OFF: Start-up time: 8 - 14 Vdc No load (max.) 250 mA 9.2 A max. @ lo max. and Vout = 3.3 V 220 mA rms (See note 1) 20 ms Rev.11.07.08_94 SMT15E_12M 2 of 5 EMC Characteristics Electrostatic discharge: Conducted immunity: Radiated immunity: EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 General Specifications Efficiency: Insulation voltage: Switching frequency: Approvals and standards: Material flammability: Dimensions: Weight: Coplanarity: MTBF: @ 12 Vin, 3.3 Vout Fixed (Lx W x H) Telcordia SR-332 91% typ. Non-isolated 1.3 MHz typ. EN60950-1 UL/cUL60950-1 UL94V-0 33.02 x 13.46 x 8.10 mm 1.3 x 0.53 x 0.319 inches 6.3 g (0.22 oz.) 100 µm 3,289,053 hours Environmental Specifications Thermal performance: Operating ambient, temperature Non-operating JEDEC J-STD-020C -40 °C to +85 °C -40 °C to +125 °C Level 3 MSL: Protection Short-circuit: Thermal: Continuous Automatic recovery Embedded Power for Business-Critical Continuity Ordering Information Output Power (max) 99 W Input Voltage 8 - 14 Vdc Rev.11.07.08_94 SMT30E 3 of 5 Output Output Output Current Maximum Voltage (11) Current (min) (max) Load (typ) 0.8-3.63 V Regulation Line ±0.2% Load ±1.5% Model Numbers (12, 13) SMT30E-12W3V3J 0 A 30 A 91% All specifications are typical 12 Vin and 1.5 Vout, full load at 25 °C unless otherwise stated. Cout = 100µF Part Number System with Options Product Family Rated Output Current Performance Input Voltage Type of Output Output Voltage Packaging Options SMT SMT = Surface Mount 30 06 = 6 A E E = Enhanced Performance 12 12 = 8 Vdc to 14 Vdc W W = Wide 3V3 0.8 Vdc to 3.63 Vdc TJ No ‘T’ suffix = Pb-free RoHS 6/6 compliant parts in trays e.g. SMT30E-12W3V3J -TJ = PB-free RoHS 6/6 compliant part in Tape and Reel e.g. SMT30E-12W3v3-TJ Output Voltage Adjustment of the SMT30E-12W3V3J Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT30E-12W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT30E-12W3V3J converter leaves the factory the output has been adjusted to the default voltage of 0.8 V. Notes 1 The SMT30E features a ‘Positive Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT30E: Configuration Remote pin open circuit Remote pin pulled low [Von/off < 0.8 V] Remote pin pulled high [Von/off >2.8 V] Converter Operation Unit is ON Unit is OFF Unit is ON Notes A The derating curves represent the condition at which internal components are within the Emerson Network Power derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. A ‘Negative Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘R’ towards the end of the model number, e.g. SMT30E-12W3V3-TRJ. 2 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 3 NOTICE: Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at http://www.powerconversion.com to find a suitable alternative. Embedded Power for Business-Critical Continuity Specifications All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. 40 Rev.11.07.08_94 SMT30E 4 of 5 OUTPUT CURRENT (A) 30 0 m/s 1m/s 2m/s OUTPUT CURRENT (A) 40 30 0 m/s 1m/s 2m/s 20 20 10 0 0 20 40 60 80 10 0 0 20 40 60 80 AMBIENT TEMPERATURE (ºC) AMBIENT TEMPERATURE (ºC) Figure 1 - Derating Curve Vin = 12 V, Output Voltage = 1.0 V (See Note A) Figure 2 - Derating Curve Vin = 12 V, Output Voltage = 1.5 V (See Note A) 30 0m/s 1m/s 2m/s OUTPUT CURRENT (A) OUTPUT CURRENT (A) 40 40 30 0 m/s 1m/s 2m/s 20 20 10 0 0 20 40 60 80 10 0 0 20 40 60 80 AMBIENT TEMPERATURE (ºC) AMBIENT TEMPERATURE (ºC) Figure 3 - Derating Curve Vin = 12 V, Output Voltage = 1.8 V (See Note A) Figure 4 - Derating Curve Vin = 12 V, Output Voltage = 2.5 V (See Note A) 100 EFFICIENCY (%) 80 60 40 20 0 0 5 10 15 20 25 30 Gnd Vout = 1.0V Vout = 1.5V Vout = 1.8V Vout = 2.5V Vout = 3.3V Vin Remote ON/OFF Cin 47F 6 SMT30E 1 5 2 4 Remote sense + Vout 3 RTRIM Trim Cout 100F (Required) Load OUTPUT CURRENT (A) Figure 5 - Efficiency vs Load Current Vin = 12 V (See Note B) Figure 6 - Standard Application Embedded Power for Business-Critical Continuity Mechanical Drawing 0.310 [7.87] 0.039 [1.00] 0.430 [10.92] 0.190 [4.83] 0.190 [4.83] 0.190 [4.83] 0.297 [7.54] Americas 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Rev.11.07.08_94 SMT30E 5 of 5 0.405 [10.29] 0.075 [1.91] TOP VIEW 0.5300.010 [13.460.25] 0.039 [1.00] GND +Vout Trim Sense Europe (UK) +Vin 1.3000.010 [33.020.25] BOTTOM VIEW Remote ON/OFF 0.048 [1.22] Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) SIDE VIEW 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 SEATING PLANE 0.319 [8.10] max. INSTALLED HT. CONNECTOR (6 PL) WIDTH : 0.112 0.003 [2.840.08] LENGTH : 0.062 0.0016 [1.570.04] For global contact, visit: www.powerconversion.com techsupport.embeddedpower @emerson.com All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless other wise stated While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Pin connections Pin Number Function 1 2 3 4 5 6 Remote ON/OFF Remote Sense Trim +Vout GND +Vin Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. Figure 7 - Mechanical Drawing and Pinout Table