TQN20A48S12V-J

Embedded Power for Business-Critical Continuity Quarter-Brick Series Narrow Input IBC Total Power: 240 -300W Input Voltage: 48VDC # of Outputs: Single Rev.04.02.08 Quarter-brick narrow input IBC 1 of 4 Special Features • 48 V input with isolated 12 V output • Efficiencies up to 96% • Open loop regulation • Fully rated 240 W @ 70 °C, 200 LFM • Overcurrent protection • Operates with no load • Auto restart after fault condition • Remote ON/OFF • Parallelable • Over-temperature protection • Available RoHS compliant • 2 Year Warranty This series is a new, high efficiency, Quarter-Brick, isolated, Intermediate Bus Converter series that provides up to 300 Watts of output power. The series is designed to convert 48 Volts ±10% to a loosely regulated 12 Volts at full rated load up to 25 A and efficiencies up to 96%. This converter is available in four package types, standard quarter-brick through-hole, through-hole vertical, standard quarter-brick surface-mount, and quarter-brick surface-mount solder ball. In addition, this series features remote ON/OFF, no-load operation, input undervoltage protection as well as output overvoltage and overcurrent protection. Safety UL/cUL : CAN/CSA 22.2 No. 60950 UL 60950 File No. E139421 TÜV Product Service (EN60950) Certificate No. B03 04 19870213 Embedded Power for Business-Critical Continuity Specifications All specifications are typical at nominal input, full load at 25 °C ambient unless otherwise stated. Rev.04.02.08 Quarter-brick narrow input IBC 2 of 4 OUTPUT SPECIFICATIONS Output voltage Current share accuracy Line regulation Load regulation Minimum load Overshoot Undershoot Ripple and noise (See Note 1) Transient response (See Note 2) Overvoltage setpoint INPUT SPECIFICATIONS Input voltage range Input current Input reflected ripple Remote ON/OFF Under-voltage lockout Start-up time (See Note 4) Nominal 48 Vdc No load Remote OFF (See Note 3) ON OFF Power up Power down Power up Power down ±10% Vdc 100 mA typ. 2 mA typ. 34 mA rms 100 mA pk-pk >1.7 Vdc