NH15VPF2X5

PRODUCT DATASHEET ENERGIZER NH15-2300 (HR6) Classification: Chemical System: Designation: Nominal Voltage: Rated Capacity: Typical Weight: Typical Volume: Terminals: Jacket: Industry Standard Dimensions mm (inches) 14.50 (0.571) 13.50 (0.531) AA Specifications Rechargeable Nickel-Metal Hydride (NiMH) ANSI-1.2H2 IEC-HR6 1.2 Volts 2300 mAh at 21°C (70°F) Based on 460 mA (0.2C ) discharge rate 28 grams (0.99 oz.) 8.3 cubic centimeters (0.5 cubic inch) Flat Contact Plastic 1.00 (0.039) Minimum 5.50 (0.217) Maximum Internal Resistance: The internal resistance of the cell varies with state of charge, as follows: Cell Charged Cell 1/2 Discharged 30 milliohms 40 milliohms (tolerance of ±20% applies to above values) 50.50 (1.988) 49.20 (1.937) 7.00 (0.276) Minimum AC Impedance (no load): The impedance of the charged cell varies with frequency, as follows: Discharge Characteristics Frequency (Hz) Typical Performance at 21ºC (70ºF) 1.4 1000 Cell Voltage 1.3 230 mA (0.1C) 1.2 Above values based on AC current set at 1.0 ampere. Value tolerances are ±20%. 460 mA (0.2C) 1.1 1.0 0.9 0 3 6 Hours of Discharge 9 12 1.3 1.2 1.1 2300 mA (1.0C) 4600 mA (2.0C) 1.0 Charge: Discharge: Storage: Humidity: 1150 mA (0.5C) 0.5 0ºC to 40ºC (32ºF to 104ºF) 0ºC to 50ºC (32ºF to 122ºF) -20ºC to 30ºC (-4ºF to 86ºF) 65±20% NOTE: Operating at extreme temperatures, will significantly impact battery cycle life. 0.9 0.0 Operating and Storage Temperatures: To maintain maximum performance, observe the following general guidelines regarding environmental conditions: 1.4 Cell Voltage Impedance (milliohms) (charged cell) 12 1.0 1.5 2.0 2.5 Hours of Discharge Important Notice This data sheet contains typical information specific to products manufactured at the time of its publication. Contents herein do not constitute a warranty and are for reference only. Form No. NH15-2300GL1118 Page 1 of 1