Capacitors for Power Factor Correction
Series/Type:
MKK-525-I-18,6-01
The following products presented in this data sheet are being withdrawn. Ordering Code B25667A5217A175 Substitute Product Date of Withdrawal 2004-07-30 Deadline Last Orders Last Shipments
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.
PhaseCap™ B25667-A5217-A175
MKK525-I-18,6-01
Characteristics CN UN fN QN IN tan δ 0 1x 215 AC 525 50 18,6 1x 36 µF ±5 % V Hz 60 Hz kvar 22,3 kvar A 43 A
Marking
0,2 W/kvar (dielectric)
Maximum ratings Umax
The information in our data book / sheet describes the type of component and shall not be considered as assured characteristics.
I r(40) Is (du/dt) max (du/dt) s
AC 580 AC 680 1x 55 8600 16 40
V, 8 h daily V, 1 min A (ΘA = 40°C, U N ) A V/µs V/µs
Toothed washer DIN 6797-J13 Hex nut DIN 439-BM12
Test data UTT UTC AC 1150 V, 10 s AC 3000 V, 10 s
Rivet (Impregnating hole)
tan δ (50 Hz) ≤ 0,5 W/kvar (total)
C61014-A0508-A401 Dimensions in mm
Climatic category -40/D Θ min Θ max Humidity Θ stg –40 °C +55 °C Max. relative Humidity ≤ 95 % –55 bis +70 °C
Design data Dimensions Ø x l Approx. weight Impregnation Fixing Mounting hole Max. torque Terminals Max. torque Terminal cross section Creepage distance Clearance 142 x 200 mm (5,59 x 7,87 in) 2 kg (4,4 lb) Gas Threaded bolt M12 14 mm (0,55 in) 10 Nm Isolated terminal, IP20 1,2 Nm 16 mm² (5 AWG) 12,7 mm (0,50 in) 9,6 mm (0,38 in)
Life expectancy t LD 100 000 h
Overpressure disconnector Any mounting position possible
Remarks Natural cooling
IEC 60831-1/2, EN 60831-1/2, VDE 560-46/47
KO L E / Pe 01.12.1999
Contact: EPCOS AG KO PM L, P.O. Box 80 17 09, 81617 Munich, Germany, Fax: 0049 89 636-22748, Phone: 0049 89 636-23817
很抱歉,暂时无法提供与“B25667-A5217-A175”相匹配的价格&库存,您可以联系我们找货
免费人工找货