B32231D1684000

Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: Date: B32231 May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polyester film capacitors (MKT) General purpose (wound) B32231 Typical applications Smoothing Filtering Climatic Max. operating temperature: 100 °C Climatic category (IEC 60068-1): 40/100/21 Construction Dielectric: polyethylene terephthalate (polyester, PET) Flat winding Insulating sleeve Face ends sealed with epoxy resin Terminals Central axial wire leads, lead-free tinned Marking Manufacturer, series number, rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (coded) Delivery mode Bulk (untaped) Dimensional drawing Dimensions in mm Width wmax Lead diameter d1 ≤6.0 0.6 >6.0 ... 13.0 0.8 When bending leads take care to leave a clearance of 1 mm to the capacitor body. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 19 B32231 General purpose (wound) Overview of available types Type VR (V DC) VRMS (V AC) CR (µF) 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 B32231 100 63 250 160 400 200 630 200 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 19 B32231 General purpose (wound) Ordering codes and packing units VR VRMS CR f ≤60 Hz V DC V AC µF 100 63 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 250 160 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 Max. dimensions w×h×l mm 5.5 × 8.5 × 14.0 5.5 × 8.5 × 14.0 5.5 × 8.5 × 14.0 5.5 × 9.0 × 19.0 5.5 × 9.0 × 19.0 7.0 × 12.0 × 19.0 8.0 × 13.0 × 19.0 8.0 × 13.0 × 27.0 8.0 × 15.0 × 27.0 10.0 × 18.0 × 32.0 10.0 × 20.0 × 32.0 13.0 × 23.0 × 32.0 5.5 × 8.5 × 14.0 5.5 × 8.5 × 14.0 5.5 × 9.0 × 19.0 5.5 × 9.0 × 19.0 6.0 × 12.0 × 19.0 7.5 × 12.0 × 19.0 7.5 × 12.0 × 27.0 8.5 × 14.0 × 27.0 8.5 × 16.0 × 27.0 10.0 × 18.0 × 32.0 13.0 × 20.0 × 32.0 Ordering code (composition see below) B32231D1154+000 B32231D1224+000 B32231D1334+000 B32231D1474+000 B32231D1684+000 B32231D1105+000 B32231D1155+000 B32231D1225+000 B32231D1335+000 B32231D1475+000 B32231D1685+000 B32231D1106+000 B32231D3104+000 B32231D3154+000 B32231D3224+000 B32231D3334+000 B32231D3474+000 B32231D3684+000 B32231D3105+000 B32231D3155+000 B32231D3225+000 B32231D3335+000 B32231D3475+000 Untaped pcs./MOQ 6000 6000 6000 6000 6000 4000 4000 4000 4000 2000 2000 1000 6000 6000 6000 6000 4000 4000 4000 4000 2000 2000 1000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% (on request) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 19 B32231 General purpose (wound) Ordering codes and packing units VR VRMS CR f ≤60 Hz V DC V AC µF 400 200 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 630 200 0.10 0.15 0.22 0.33 0.47 0.68 1.0 Max. dimensions w×h×l mm 5.5 × 8.5 × 19.0 5.5 × 9.0 × 19.0 7.0 × 12.0 × 19.0 7.0 × 12.0 × 19.0 7.0 × 12.0 × 27.0 8.0 × 14.0 × 27.0 9.0 × 16.0 × 27.0 10.0 × 18.0 × 32.0 13.0 × 22.0 × 32.0 6.0 × 11.0 × 19.0 7.5 × 12.0 × 19.0 8.0 × 13.0 × 19.0 8.0 × 13.0 × 27.0 8.0 × 14.0 × 27.0 10.0 × 16.0 × 32.0 13.0 × 18.0 × 32.0 Ordering code (composition see below) B32231D6104+000 B32231D6154+000 B32231D6224+000 B32231D6334+000 B32231D6474+000 B32231D6684+000 B32231D6105+000 B32231D6155+000 B32231D6225+000 B32231D8104+000 B32231D8154+000 B32231D8224+000 B32231D8334+000 B32231D8474+000 B32231D8684+000 B32231D8105+000 Untaped pcs./MOQ 6000 6000 4000 4000 4000 4000 2000 1000 1000 4000 4000 4000 4000 2000 2000 1000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% (on request) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 19 B32231 General purpose (wound) Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR 0.10 µF < CR ≤ 1 µF 1 kHz 10 10 kHz 25 VR CR ≤ 0.33 µF 100 V DC 3750 MΩ ≥ 250 V DC 7500 MΩ +100 °C +100 °C 40 °C +85 °C CR > 1 µF 10 CR > 0.33 µF 1250 s 2500 s Dissipation factor tan δ (in 10-3) at at 20 °C (upper limit values) Insulation resistance Rins or time constant τ = CR Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage 1.4 VR, 2 s TA (°C) DC voltage derating Category voltage VC (continuous operation with VDC TA ≤ 85 VC = VR or VAC at f ≤ 60 Hz) 85 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s