Film Capacitors
Metallized Polyester Film Capacitors (MKT)
Series/Type:
B32231
Date:
May 2009
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B32231D1334K000
B32231D1334J000
B32231D1154K000
Date of
Withdrawal
2012-08-24
2012-08-24
2012-08-24
Deadline Last
Orders
2012-11-30
2012-11-30
2012-11-30
Last Shipments
2013-02-28
2013-02-28
2013-02-28
© EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Ordering Code
B32231D1154J000
B32231D3155K000
B32231D3155J000
B32231D3154K000
B32231D3154J000
B32231D3105K000
B32231D3105J000
B32231D3104K000
B32231D3104J000
B32231D1684K000
B32231D1684J000
B32231D1474K000
B32231D1474J000
B32231D1225K000
B32231D1225J000
B32231D1224K000
B32231D1224J000
B32231D1155K000
B32231D1155J000
B32231D1105K000
B32231D1105J000
B32231D8474K000
B32231D8474J000
B32231D8334K000
B32231D8334J000
B32231D8224K000
B32231D8224J000
B32231D8154K000
B32231D8154J000
B32231D8104K000
B32231D8104J000
B32231D6684K000
B32231D6684J000
B32231D6474K000
B32231D6474J000
B32231D6334K000
B32231D6334J000
B32231D6224K000
Substitute Product
Date of
Withdrawal
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
Deadline Last
Orders
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
Last Shipments
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
Ordering Code
B32231D6224J000
B32231D6154K000
B32231D6154J000
B32231D6104K000
B32231D6104J000
B32231D3684K000
B32231D3684J000
B32231D3474K000
B32231D3474J000
B32231D3334K000
B32231D3334J000
B32231D3225K000
B32231D3225J000
B32231D3224K000
B32231D3224J000
Substitute Product
Date of
Withdrawal
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
Deadline Last
Orders
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
Last Shipments
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
Metallized polyester film capacitors (MKT)
B32231
General purpose (wound)
Typical applications
Smoothing
Filtering
Dimensional drawing
Climatic
Max. operating temperature: 100 °C
Climatic category (IEC 60068-1): 40/100/21
Construction
Dielectric: polyethylene terephthalate
(polyester, PET)
Flat winding
Insulating sleeve
Face ends sealed with epoxy resin
Dimensions in mm
Width wmax
Lead diameter d1
>6.0 ... 13.0
0.8
When bending leads take care to leave a
clearance of 1 mm to the capacitor body.
Terminals
Central axial wire leads, lead-free tinned
Marking
Manufacturer, series number,
rated capacitance (coded),
capacitance tolerance (code letter),
rated DC voltage, date of manufacture (coded)
Delivery mode
Bulk (untaped)
Please read Cautions and warnings and
Important notes at the end of this document.
≤6.0
0.6
Page 2 of 19
B32231
General purpose (wound)
Overview of available types
Type
B32231
VR (V DC)
100
250
400
630
VRMS (V AC)
63
160
200
200
CR (µF)
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 19
B32231
General purpose (wound)
Ordering codes and packing units
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
100
63
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
250 160
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
Max. dimensions
w×h×l
mm
5.5 × 8.5 × 14.0
5.5 × 8.5 × 14.0
5.5 × 8.5 × 14.0
5.5 × 9.0 × 19.0
5.5 × 9.0 × 19.0
7.0 × 12.0 × 19.0
8.0 × 13.0 × 19.0
8.0 × 13.0 × 27.0
8.0 × 15.0 × 27.0
10.0 × 18.0 × 32.0
10.0 × 20.0 × 32.0
13.0 × 23.0 × 32.0
5.5 × 8.5 × 14.0
5.5 × 8.5 × 14.0
5.5 × 9.0 × 19.0
5.5 × 9.0 × 19.0
6.0 × 12.0 × 19.0
7.5 × 12.0 × 19.0
7.5 × 12.0 × 27.0
8.5 × 14.0 × 27.0
8.5 × 16.0 × 27.0
10.0 × 18.0 × 32.0
13.0 × 20.0 × 32.0
Ordering code
(composition see
below)
B32231D1154+000
B32231D1224+000
B32231D1334+000
B32231D1474+000
B32231D1684+000
B32231D1105+000
B32231D1155+000
B32231D1225+000
B32231D1335+000
B32231D1475+000
B32231D1685+000
B32231D1106+000
B32231D3104+000
B32231D3154+000
B32231D3224+000
B32231D3334+000
B32231D3474+000
B32231D3684+000
B32231D3105+000
B32231D3155+000
B32231D3225+000
B32231D3335+000
B32231D3475+000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5% (on request)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 19
Untaped
pcs./MOQ
6000
6000
6000
6000
6000
4000
4000
4000
4000
2000
2000
1000
6000
6000
6000
6000
4000
4000
4000
4000
2000
2000
1000
B32231
General purpose (wound)
Ordering codes and packing units
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
400 200
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
630 200
0.10
0.15
0.22
0.33
0.47
0.68
1.0
Max. dimensions
w×h×l
mm
5.5 × 8.5 × 19.0
5.5 × 9.0 × 19.0
7.0 × 12.0 × 19.0
7.0 × 12.0 × 19.0
7.0 × 12.0 × 27.0
8.0 × 14.0 × 27.0
9.0 × 16.0 × 27.0
10.0 × 18.0 × 32.0
13.0 × 22.0 × 32.0
6.0 × 11.0 × 19.0
7.5 × 12.0 × 19.0
8.0 × 13.0 × 19.0
8.0 × 13.0 × 27.0
8.0 × 14.0 × 27.0
10.0 × 16.0 × 32.0
13.0 × 18.0 × 32.0
Ordering code
(composition see
below)
B32231D6104+000
B32231D6154+000
B32231D6224+000
B32231D6334+000
B32231D6474+000
B32231D6684+000
B32231D6105+000
B32231D6155+000
B32231D6225+000
B32231D8104+000
B32231D8154+000
B32231D8224+000
B32231D8334+000
B32231D8474+000
B32231D8684+000
B32231D8105+000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5% (on request)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 19
Untaped
pcs./MOQ
6000
6000
4000
4000
4000
4000
2000
1000
1000
4000
4000
4000
4000
2000
2000
1000
B32231
General purpose (wound)
Technical data
Operating temperature range
Max. operating temperature Top,max
Upper category temperature Tmax
Lower category temperature Tmin
Rated temperature TR
Dissipation factor tan δ (in 10-3) at
at 20 °C
(upper limit values)
0.10 µF < CR ≤ 1 µF
1 kHz 10
10 kHz 25
VR
CR ≤ 0.33 µF
100 V DC 3750 MΩ
≥ 250 V DC 7500 MΩ
Insulation resistance Rins
or time constant τ = CR Rins
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage
1.4 VR, 2 s
TA (°C)
DC voltage derating
Category voltage VC
(continuous operation with VDC TA ≤ 85
VC = VR
or VAC at f ≤ 60 Hz)
85 1 µF
10
CR > 0.33 µF
1250 s
2500 s
AC voltage derating
VC,RMS = VRMS
VC,RMS=VRMS (165TA)/80
AC voltage (max. hours)
Vop = 1.0 VC,RMS (1000 h)
≤ 5%
≤ 5 10-3 (at 1 kHz)
≤ 7 10-3 (at 10 kHz)
≥ 20% of minimum
as-delivered values
B32231
General purpose (wound)
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Length of capacitor
VR
VRMS
V DC
V AC
100
63
250
160
400
200
630
200
14 mm
19 mm
27 mm
32 mm
dV/dt in V/µs
6
10
3
5
7
10
2
3
4
7
1.5
2.5
3
5
14 mm
19 mm
27 mm
32 mm
k0 in V2/µs
1 200
5 000
600
2 500
5 600
12 500
400
1 500
3 200
8 800
300
1 250
2 400
6 300
k0 values
Length of capacitor
VR
VRMS
V DC
V AC
100
63
250
160
400
200
630
200
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 19
B32231
General purpose (wound)
Impedance Z versus frequency f
(typical values)
Permissible AC voltage VRMS versus frequency
Values can be obtained on request. In specific cases please provide a scaled voltage/ time graph
and state operating conditions.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 19
B32231
General purpose (wound)
Mounting guidelines
1
Soldering
1.1
Solderability of leads
The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far
higher than the upper category temperature of the capacitors, the terminal wires should be cut off
from the capacitor before the ageing procedure to prevent the solderability being impaired by the
products of any capacitor decomposition that might occur.
Solder bath temperature
235 ±5 °C
Soldering time
2.0 ±0.5 s
Immersion depth
2.0 +0/0.5 mm from capacitor body or seating plane
Evaluation criteria:
Visual inspection
Wetting of wire surface by new solder ≥90%, free-flowing solder
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C
coated
uncoated (lead spacing > 10 mm)
MFP
MKP (lead spacing > 7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
MKP (lead spacing ≤ 7.5 mm)
MKT uncoated (lead spacing ≤ 10 mm)
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 19
10 ±1 s
5 ±1 s
很抱歉,暂时无法提供与“B32231D3684K000”相匹配的价格&库存,您可以联系我们找货
免费人工找货