B32231D6105K000

Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32231 Date: May 2009 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product B32231D1334K000 B32231D1334J000 B32231D1154K000 Date of Withdrawal 2012-08-24 2012-08-24 2012-08-24 Deadline Last Orders 2012-11-30 2012-11-30 2012-11-30 Last Shipments 2013-02-28 2013-02-28 2013-02-28 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Ordering Code B32231D1154J000 B32231D3155K000 B32231D3155J000 B32231D3154K000 B32231D3154J000 B32231D3105K000 B32231D3105J000 B32231D3104K000 B32231D3104J000 B32231D1684K000 B32231D1684J000 B32231D1474K000 B32231D1474J000 B32231D1225K000 B32231D1225J000 B32231D1224K000 B32231D1224J000 B32231D1155K000 B32231D1155J000 B32231D1105K000 B32231D1105J000 B32231D8474K000 B32231D8474J000 B32231D8334K000 B32231D8334J000 B32231D8224K000 B32231D8224J000 B32231D8154K000 B32231D8154J000 B32231D8104K000 B32231D8104J000 B32231D6684K000 B32231D6684J000 B32231D6474K000 B32231D6474J000 B32231D6334K000 B32231D6334J000 B32231D6224K000 Substitute Product Date of Withdrawal 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 Deadline Last Orders 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 Last Shipments 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 Ordering Code B32231D6224J000 B32231D6154K000 B32231D6154J000 B32231D6104K000 B32231D6104J000 B32231D3684K000 B32231D3684J000 B32231D3474K000 B32231D3474J000 B32231D3334K000 B32231D3334J000 B32231D3225K000 B32231D3225J000 B32231D3224K000 B32231D3224J000 Substitute Product Date of Withdrawal 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 2012-08-24 Deadline Last Orders 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 2012-11-30 Last Shipments 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 2013-02-28 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. Metallized polyester film capacitors (MKT) B32231 General purpose (wound) Typical applications Smoothing Filtering Dimensional drawing Climatic Max. operating temperature: 100 °C Climatic category (IEC 60068-1): 40/100/21 Construction Dielectric: polyethylene terephthalate (polyester, PET) Flat winding Insulating sleeve Face ends sealed with epoxy resin Dimensions in mm Width wmax Lead diameter d1 >6.0 ... 13.0 0.8 When bending leads take care to leave a clearance of 1 mm to the capacitor body. Terminals Central axial wire leads, lead-free tinned Marking Manufacturer, series number, rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (coded) Delivery mode Bulk (untaped) Please read Cautions and warnings and Important notes at the end of this document. ≤6.0 0.6 Page 2 of 19 B32231 General purpose (wound) Overview of available types Type B32231 VR (V DC) 100 250 400 630 VRMS (V AC) 63 160 200 200 CR (µF) 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 19 B32231 General purpose (wound) Ordering codes and packing units VR VRMS CR f ≤60 Hz V DC V AC µF 100 63 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 250 160 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 Max. dimensions w×h×l mm 5.5 × 8.5 × 14.0 5.5 × 8.5 × 14.0 5.5 × 8.5 × 14.0 5.5 × 9.0 × 19.0 5.5 × 9.0 × 19.0 7.0 × 12.0 × 19.0 8.0 × 13.0 × 19.0 8.0 × 13.0 × 27.0 8.0 × 15.0 × 27.0 10.0 × 18.0 × 32.0 10.0 × 20.0 × 32.0 13.0 × 23.0 × 32.0 5.5 × 8.5 × 14.0 5.5 × 8.5 × 14.0 5.5 × 9.0 × 19.0 5.5 × 9.0 × 19.0 6.0 × 12.0 × 19.0 7.5 × 12.0 × 19.0 7.5 × 12.0 × 27.0 8.5 × 14.0 × 27.0 8.5 × 16.0 × 27.0 10.0 × 18.0 × 32.0 13.0 × 20.0 × 32.0 Ordering code (composition see below) B32231D1154+000 B32231D1224+000 B32231D1334+000 B32231D1474+000 B32231D1684+000 B32231D1105+000 B32231D1155+000 B32231D1225+000 B32231D1335+000 B32231D1475+000 B32231D1685+000 B32231D1106+000 B32231D3104+000 B32231D3154+000 B32231D3224+000 B32231D3334+000 B32231D3474+000 B32231D3684+000 B32231D3105+000 B32231D3155+000 B32231D3225+000 B32231D3335+000 B32231D3475+000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% (on request) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 19 Untaped pcs./MOQ 6000 6000 6000 6000 6000 4000 4000 4000 4000 2000 2000 1000 6000 6000 6000 6000 4000 4000 4000 4000 2000 2000 1000 B32231 General purpose (wound) Ordering codes and packing units VR VRMS CR f ≤60 Hz V DC V AC µF 400 200 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 630 200 0.10 0.15 0.22 0.33 0.47 0.68 1.0 Max. dimensions w×h×l mm 5.5 × 8.5 × 19.0 5.5 × 9.0 × 19.0 7.0 × 12.0 × 19.0 7.0 × 12.0 × 19.0 7.0 × 12.0 × 27.0 8.0 × 14.0 × 27.0 9.0 × 16.0 × 27.0 10.0 × 18.0 × 32.0 13.0 × 22.0 × 32.0 6.0 × 11.0 × 19.0 7.5 × 12.0 × 19.0 8.0 × 13.0 × 19.0 8.0 × 13.0 × 27.0 8.0 × 14.0 × 27.0 10.0 × 16.0 × 32.0 13.0 × 18.0 × 32.0 Ordering code (composition see below) B32231D6104+000 B32231D6154+000 B32231D6224+000 B32231D6334+000 B32231D6474+000 B32231D6684+000 B32231D6105+000 B32231D6155+000 B32231D6225+000 B32231D8104+000 B32231D8154+000 B32231D8224+000 B32231D8334+000 B32231D8474+000 B32231D8684+000 B32231D8105+000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% (on request) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 19 Untaped pcs./MOQ 6000 6000 4000 4000 4000 4000 2000 1000 1000 4000 4000 4000 4000 2000 2000 1000 B32231 General purpose (wound) Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR Dissipation factor tan δ (in 10-3) at at 20 °C (upper limit values) 0.10 µF < CR ≤ 1 µF 1 kHz 10 10 kHz 25 VR CR ≤ 0.33 µF 100 V DC 3750 MΩ ≥ 250 V DC 7500 MΩ Insulation resistance Rins or time constant τ = CR  Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage 1.4  VR, 2 s TA (°C) DC voltage derating Category voltage VC (continuous operation with VDC TA ≤ 85 VC = VR or VAC at f ≤ 60 Hz) 85 1 µF 10  CR > 0.33 µF 1250 s 2500 s AC voltage derating VC,RMS = VRMS VC,RMS=VRMS  (165TA)/80 AC voltage (max. hours) Vop = 1.0  VC,RMS (1000 h) ≤ 5% ≤ 5  10-3 (at 1 kHz) ≤ 7  10-3 (at 10 kHz) ≥ 20% of minimum as-delivered values B32231 General purpose (wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Length of capacitor VR VRMS V DC V AC 100 63 250 160 400 200 630 200 14 mm 19 mm 27 mm 32 mm dV/dt in V/µs 6 10   3 5 7 10 2 3 4 7 1.5 2.5 3 5 14 mm 19 mm 27 mm 32 mm k0 in V2/µs 1 200 5 000   600 2 500 5 600 12 500 400 1 500 3 200 8 800 300 1 250 2 400 6 300 k0 values Length of capacitor VR VRMS V DC V AC 100 63 250 160 400 200 630 200 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 19 B32231 General purpose (wound) Impedance Z versus frequency f (typical values) Permissible AC voltage VRMS versus frequency Values can be obtained on request. In specific cases please provide a scaled voltage/ time graph and state operating conditions. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 19 B32231 General purpose (wound) Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Wetting of wire surface by new solder ≥90%, free-flowing solder 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 19 10 ±1 s 5 ±1 s