B32332B1406J010

Film capacitors – AC capacitors Motor run capacitors 250 V; class B; 85 °C Series/Type: B32330/B32332 – MotorCap™ Ordering code: Date: Version: July 2007 1.0 Content of inside pages of data sheet. Data will be automatically entered into headers and footers. Please fill in the table and then change the colour to “White”. This ensures that the table disappears for the customer pdf. Identification/Classification 1: (header 1) Identification/Classification 2: (header 2) Ordering code: Series/Type: Preliminary data (optional): (if necessary) Department: Date: FK PC PM AC July 2007 B32330/B32332 – MotorCap™ Film capacitors – AC capacitors Motor run capacitors © EPCOS AG 2007. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Film capacitors – AC capacitors Motor run capacitors B32330/B32332 – MotorCap™ Construction Dielectric: polypropylene film Aluminum can Soft polyurethane resin Features Self-healing properties Low dissipation factor Overpressure disconnection device Highest safety level P2 to IEC 60252-1 2001-02 High insulation resistance Capacitor C US UL files E106388 Typical applications For general sine wave applications, mainly as motor run capacitor Terminals B32330 – single fast-on: 6.3 × 0.8 mm B32332 – double fast-on: 6.3 × 0.8 mm Mounting parts (optional) Threaded stud at bottom of can (M8; max. torque = 5 Nm) Technical data and specifications Reference standards IEC 60252-1 2001-02 EN 60252 2001 UL 810 Safety class to IEC 60252-1 2001-02 Life expectancy to IEC 60252 2001 UL 810 file E106388 Rated capacitance CR Tolerance Rated voltage VR Rated frequency fR P2 250 V: 10,000 h (class B) Approved component 10000 AFC See dimensions table ±5% 250 V 50/60 Hz FK PC PM AC Please read the important notes, cautions and warnings. Page 2 of 6 July 2007 Film capacitors – AC capacitors Motor run capacitors B32330/B32332 – MotorCap™ Maximum ratings Maximum permissible voltage Vmax Maximum permissible current Imax Test data AC test voltage terminal to terminal VTT Insulation voltage terminals to case Insulation resistance Rins or time constant τ at 20 °C; rel. humidity ≤ 65% (minimum as-delivered values) Dissipation factor tan δ at 20 °C Maximum rate of voltage rise dV/dtmax Climatic data Climatic category Lower category Tmin Upper category Tmax Damp heat test ttest Ball pressure test to IEC 60309-1 sec. 27.3 Top disk material Option A: UL 94 V2 compatible Glow wire test to IEC 60695-2-11 Test temp 550 °C for IR ≤ 0.5 A Test temp 850 °C for IR > 0.5 A Option B: UL 94 V2/V0 compatible Glow wire test to IEC60335-1 & IEC 60695-2-11 Test temp 550 °C / 750 °C Part is compatible to EN 60335-1 Tracking test to IEC 60112 solution A Compatibility to RoHS Compliance to directive 2002/95/EC > 250 V Self-extinguish within 2 seconds of withdrawing glow wire Self-extinguish within 30 seconds of withdrawing glow wire 25/085/21 to IEC 60068-1 –25 °C +85 °C 21 days at 125°C 2 · VR, 2 s (routine test) 2 · VR, 60 s (type test) 2,000 V AC, 60 s (type test) 2,000 V AC, 2 s (routine test) 3,000 s 1.1 · VR 1.3 · IR (VR = rated voltage) (IR = rated current) ≤ 1,0 · 10-3 (120 Hz) 10 V/μs Mechanical and electrical properties of terminal top disk material FK PC PM AC Please read the important notes, cautions and warnings. Page 3 of 6 July 2007 Film capacitors – AC capacitors Motor run capacitors B32330/B32332 – MotorCap™ Dimensional drawings B32330/B32332 d±1 Before Safety Device Operation Marking ±2 A 13 16 max. After Safety Device Operation Marking M8 for ø30-53 mm M12 for ø63.5 mm According to DIN 6797-A According to DIN 934 M 8 bolt: M 12 bolzt: L = 12 mm L = 16 mm KMK1156-A-E A = 5 mm for diameters d =30, 35, 40, 45 mm A = 0 mm for diameters d = 50, 53, 63.5 mm FK PC PM AC Please read the important notes, cautions and warnings. Page 4 of 6 L July 2007 Film capacitors – AC capacitors Motor run capacitors B32330/B32332 – MotorCap™ Ordering codes and packing units VR V AC 250 CR μF 4 5 6 7 8 10 12 15 20 25 30 35 40 45 50 55 60 Composition of ordering code: *: terminals 0 – single fast-on terminals 2 – double fast-on terminals #: construction of can and plastic top 5 – aluminum can, Option A: UL 94 V2 top 6 – aluminum can, Option B: UL 94 V2/V0 top/IEC 60335-1 7 – aluminum can with M 8 bolt, Option A: UL 94 V2 top 8 – aluminum can with M 8 bolt, Option B: UL 94 V2/V0 top/IEC 60335-1 Max. dimensions dxl mm 30 × 68 30 × 68 30 × 68 30 × 68 30 × 68 30 × 68 30 × 68 35 × 68 35 × 68 35 × 78 40 × 78 40 × 78 40 × 78 40 × 78 40 × 103 40 × 103 40 × 103 Ordering code Packing units B3233*B1405J0#0 B3233*B1505J0#0 B3233*B1605J0#0 B3233*B1705J0#0 B3233*B1805J0#0 B3233*B1106J0#0 B3233*B1126J0#0 B3233*B1156J0#0 B3233*B1206J0#0 B3233*B1256J0#0 B3233*B1306J0#0 B3233*B1356J0#0 B3233*B1406J0#0 B3233*B1456J0#0 B3233*B1506J0#0 B3233*B1556J0#0 B3233*B1606J0#0 150 150 150 150 150 150 150 50 50 50 50 50 50 50 50 50 50 U Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power Capacitors” issued by ZVEI, which are available on the Internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are kindly requested to approve our product specifications or request our approval for your specification before ordering. FK PC PM AC Please read the important notes, cautions and warnings. Page 5 of 6 July 2007 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. FK PC PM AC Page 6 of 6 July 2007