B32524R3685

Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: Date: B32520 ... B32529 May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polyester film capacitors (MKT) General purpose (stacked/wound) B32520 ... B32529 Typical applications Blocking Coupling, decoupling Bypassing RFI for automotive Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1): 55/125/56 Construction Dielectric: polyethylene terephthalate (polyester, PET) Stacked-film technology for lead spacing 5 to 15 mm = code C, D or E in digit 7 of ordering code Wound capacitor technology for lead spacing 10 to 27.5 mm = code N, Q or R in digit 7 of ordering code Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) Features High pulse strength High contact reliability Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Dimensional drawing Dimensions in mm Lead spacing ±0.4 5.0 7.5 10.0 15.0 22.5 27.5 37.5 Lead diameter d1 0.5 0.5 0.61) 0.8 0.8 0.8 1.0 Type B32529 B32520 B32521 B32522 B32523 B32524 B32526 1) 0.5 mm for capacitor width w = 4 mm Marking Manufacturer's logo, rated capacitance (coded), cap. tolerance (code letter), rated DC voltage, date of manufacture (coded), coded type ("1") for lead spacing 5 mm, series and lot number for lead spacing ≥10 mm Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing". Please read Important notes at the end of this document. Page 2 of 46 B32520 ... B32529 General purpose (stacked/wound) Overview of available types Lead spacing 5.0 mm Type Page Technology VR (V DC) VRMS (V AC) CR (µF) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 Technology: s = Stacked-film technology / w = Wound capacitor technology B32529 6 s 63 40 s 63 s s s 7.5 mm B32520 10 s s 63 s s 100 250 400 630 63 160 200 400 40 10.0 mm B32521 12 s s 63 s s w 100 250 400 63 160 200 40 100 250 400 630 160 200 200 Please read Important notes at the end of this document. Page 3 of 46 B32520 ... B32529 General purpose (stacked/wound) Overview of available types Lead spacing 15.0 mm Type Page Technology VR (V DC) VRMS (V AC) CR (µF) 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Technology: s = Stacked-film technology / w = Wound capacitor technology B32522 14 s 63 40 s/w s/w s 63 w w 22.5 mm B32523 17 w w 63 w w w 100 250 400 450 630 63 160 200 200 200 40 27.5 mm B32524 18 w w 63 w w w 100 250 400 630 63 160 200 200 40 100 250 400 630 160 200 220 Please read Important notes at the end of this document. Page 4 of 46 B32520 ... B32529 General purpose (stacked/wound) Overview of available types Lead spacing 37.5 mm Type Page Technology VR (V DC) VRMS (V AC) CR (µF) 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 Technology: s = Stacked-film technology / w = Wound capacitor technology B32526 20 w 63 40 w 100 63 w 250 160 w 400 200 Please read Important notes at the end of this document. Page 5 of 46 B32529 General purpose (stacked) Ordering codes and packing units (lead spacing 5 mm) VR V DC 63 VRMS CR f ≤60 Hz V AC µF 40 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 Max. dimensions w×h×l mm 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 3.0 × 6.5 × 7.2 3.5 × 8.0 × 7.2 4.5 × 9.5 × 7.3 4.5 × 9.5 × 7.3 6.0 × 10.5 × 7.5 7.8 × 13.0 × 7.8 7.8 × 13.0 × 7.8 7.8 × 13.0 × 7.8 Ordering code (composition see below) B32529C0102+*** B32529C0152+*** B32529C0222+*** B32529C0332+*** B32529C0472+*** B32529C0682+*** B32529C0103+*** B32529C0153+*** B32529C0223+*** B32529C0333+*** B32529C0473+*** B32529C0683+*** B32529C0104+*** B32529C0154+*** B32529C0224+*** B32529C0334+*** B32529C0474+*** B32529C0684+*** B32529C0105+*** B32529C0155+*** B32529D0225+*** B32529D0335+*** B32529D0475M*** Ammo pack pcs./MOQ 12800 12800 12800 12800 12800 12800 12800 12800 12800 12800 12800 12800 12800 12800 12800 10800 9200 7200 7200 5200 4000 4000 4000 Reel pcs./ MOQ 11200 11200 11200 11200 11200 11200 11200 11200 11200 11200 11200 11200 11200 11200 11200 9600 8000 6000 6000 4400 3200 3200 3200 Untaped pcs./ MOQ 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 6000 6000 4000 4000 4000 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 6 of 46 B32529 General purpose (stacked) Ordering codes and packing units (lead spacing 5 mm) VR V DC 100 VRMS CR f ≤60 Hz V AC µF 63 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 Max. dimensions w×h×l mm 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 3.0 × 6.5 × 7.2 3.5 × 8.0 × 7.2 3.5 × 8.0 × 7.2 4.5 × 9.5 × 7.3 6.0 × 10.5 × 7.5 7.8 × 13.0 × 7.8 Ordering code (composition see below) B32529C1102+*** B32529C1152+*** B32529C1222+*** B32529C1332+*** B32529C1472+*** B32529C1682+*** B32529C1103+*** B32529C1153+*** B32529C1223+*** B32529C1333+*** B32529C1473+*** B32529C1683+*** B32529C1104+*** B32529C1154+*** B32529C1224+*** B32529C1334+*** B32529C1474+*** B32529C1684+*** B32529D1105+*** Ammo pack pcs./MOQ 12800 12800 12800 12800 12800 12800 12800 12800 12800 12800 12800 12800 12800 10800 9200 9200 7200 5200 4000 Reel pcs./ MOQ 11200 11200 11200 11200 11200 11200 11200 11200 11200 11200 11200 11200 11200 9600 8000 8000 6000 4400 3200 Untaped pcs./ MOQ 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 6000 4000 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 7 of 46 B32529 General purpose (stacked) Ordering codes and packing units (lead spacing 5 mm) VR V DC 250 VRMS CR f ≤60 Hz V AC µF 160 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 Max. dimensions w×h×l mm 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 3.0 × 6.5 × 7.2 3.5 × 8.0 × 7.2 4.5 × 9.5 × 7.3 4.5 × 9.5 × 7.3 5.0 × 10.0 × 7.5 7.8 × 13.0 × 7.8 7.8 × 13.0 × 7.8 7.8 × 13.0 × 7.8 Ordering code (composition see below) B32529C3102+*** B32529C3152+*** B32529C3222+*** B32529C3332+*** B32529C3472+*** B32529C3682+*** B32529C3103+*** B32529C3153+*** B32529C3223+*** B32529C3333+*** B32529C3473+*** B32529C3683+*** B32529C3104+*** B32529C3154+*** B32529D3224+*** B32529C3334+*** B32529C3474+*** Ammo pack pcs./MOQ 12800 12800 12800 12800 12800 12800 12800 12800 12800 10800 9200 7200 7200 6400 4000 4000 4000 Reel pcs./ MOQ 11200 11200 11200 11200 11200 11200 11200 11200 11200 9600 8000 6000 6000 5600 3200 3200 3200 Untaped pcs./ MOQ 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 6000 6000 6000 4000 4000 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 8 of 46 B32529 General purpose (stacked) Ordering codes and packing units (lead spacing 5 mm) VR V DC 400 VRMS CR f ≤60 Hz V AC µF 200 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 400 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 Max. dimensions w×h×l mm 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 3.0 × 6.5 × 7.2 3.0 × 6.5 × 7.2 3.5 × 8.0 × 7.2 4.5 × 9.5 × 7.3 4.5 × 9.5 × 7.3 6.0 × 10.5 × 7.5 7.8 × 13.0 × 7.8 7.8 × 13.0 × 7.8 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 2.5 × 6.5 × 7.2 3.5 × 8.0 × 7.2 3.5 × 8.0 × 7.2 3.5 × 8.0 × 7.2 5.0 × 10.0 × 7.5 5.0 × 10.0 × 7.5 7.8 × 13.0 × 7.8 7.8 × 13.0 × 7.8 Ordering code (composition see below) B32529C6102+*** B32529C6152+*** B32529C6222+*** B32529C6332+*** B32529C6472+*** B32529C6682+*** B32529E6103+*** B32529E6153+*** B32529E6223+*** B32529E6333+*** B32529E6473+*** B32529E6683+*** B32529E6104+*** B32529E6154+*** B32529C8102+*** B32529C8152+*** B32529C8222+*** B32529C8332+*** B32529C8472+*** B32529C8682+*** B32529C8103+*** B32529C8153+*** B32529C8223+*** B32529C8333+*** Ammo pack pcs./MOQ 12800 12800 12800 12800 12800 12800 10800 10800 9200 7200 7200 5200 4000 4000 12800 12800 12800 9200 9200 9200 6400 6400 5200 4000 Reel pcs./ MOQ 11200 11200 11200 11200 11200 11200 9600 9600 8000 6000 6000 4400 3200 3200 11200 11200 11200 8000 8000 8000 5600 5600 4400 3200 Untaped pcs./ MOQ 8000 8000 8000 8000 8000 8000 8000 8000 8000 6000 6000 4000 4000 4000 8000 8000 8000 8000 8000 8000 6000 6000 4000 4000 630 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 9 of 46 B32520 General purpose (stacked) Ordering codes and packing units (lead spacing 7.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 100 63 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 250 160 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 Max. dimensions w×h×l mm 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 3.0 × 8.0 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 3.0 × 8.0 × 10.0 3.0 × 8.0 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 6.0 × 12.0 × 10.3 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 3.0 × 8.0 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 Ordering code (composition see below) B32520C0683+*** B32520C0104+*** B32520C0154+*** B32520C0224+*** B32520C0334+*** B32520C0474+*** B32520C0684+*** B32520C0105+*** B32520C0155+*** B32520C0225+*** B32520C1473+*** B32520C1683+*** B32520C1104+*** B32520C1154+*** B32520C1224+*** B32520C1334+*** B32520C1474+*** B32520C1684+*** B32520C1105+*** B32520C3153+*** B32520C3223+*** B32520C3333+*** B32520C3473+*** B32520C3683+*** B32520C3104+*** B32520C3154+*** B32520C3224+*** Ammo pack pcs./MOQ 12800 12800 12800 12800 12800 10400 8000 6400 6400 5200 12800 12800 12800 10400 10400 8000 6400 5200 5200 12800 12800 12800 12800 10400 8000 6400 5200 Reel pcs./ MOQ 11200 11200 11200 11200 11200 9600 7200 5600 5600 4400 11200 11200 11200 9600 9600 7200 5600 4400 4400 11200 11200 11200 11200 9600 7200 5600 4400 Untaped pcs./ MOQ 10000 10000 10000 10000 10000 8000 6000 4000 4000 3000 10000 10000 10000 8000 8000 6000 4000 3000 3000 10000 10000 10000 10000 8000 6000 4000 3000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 10 of 46 B32520 General purpose (stacked) Ordering codes and packing units (lead spacing 7.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 400 200 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 Max. dimensions w×h×l mm 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 2.5 × 7.0 × 10.0 3.0 × 8.0 × 10.0 3.0 × 8.0 × 10.0 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 Ordering code (composition see below) B32520C6102+*** B32520C6152+*** B32520C6222+*** B32520C6332+*** B32520C6472+*** B32520C6682+*** B32520C6103+*** B32520E6153+*** B32520E6223+*** B32520E6333+*** B32520E6473+*** B32520E6683+*** B32520E6104+*** B32520E6154+*** Ammo pack pcs./MOQ 12800 12800 12800 12800 12800 12800 12800 10400 10400 8000 8000 6400 6400 5200 Reel pcs./ MOQ 11200 11200 11200 11200 11200 11200 11200 9600 9600 7200 7200 5600 5600 4400 Untaped pcs./ MOQ 10000 10000 10000 10000 10000 10000 10000 8000 8000 6000 6000 4000 4000 3000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 11 of 46 B32521 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 10 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 0.47 0.68 1.0 1.5 2.2 3.3 100 63 0.10 0.15 0.22 0.33 0.47 0.68 1.0 250 160 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 400 200 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 Max. dimensions w×h×l mm 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 Ordering code (composition see below) B32521C0474+*** B32521C0684+*** B32521C0105+*** B32521C0155+*** B32521C0225+*** B32521C0335+*** B32521C1104+*** B32521C1154+*** B32521C1224+*** B32521C1334+*** B32521C1474+*** B32521C1684+*** B32521C1105+*** B32521C3333+*** B32521C3473+*** B32521C3683+*** B32521C3104+*** B32521C3154+*** B32521C3224+*** B32521C3334+*** B32521C3474+*** B32521E6103+*** B32521E6153+*** B32521E6223+*** B32521E6333+*** B32521E6473+*** B32521E6683+*** B32521E6104+*** B32521E6154+*** Ammo pack pcs./MOQ 4000 4000 4000 3320 3320 2720 4000 4000 4000 4000 4000 3320 2720 4000 4000 4000 4000 4000 3320 3320 2720 4000 4000 4000 4000 4000 4000 3320 2720 Reel pcs./ MOQ 6800 6800 6800 5200 5200 4400 6800 6800 6800 6800 6800 5200 4400 6800 6800 6800 6800 6800 5200 5200 4400 6800 6800 6800 6800 6800 6800 5200 4400 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 12 of 46 B32521 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 10 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 630 200 0.0068 ∇ 0.010 ∇ 0.015 ∇ 0.022 ∇ 0.033 ∇ Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 Ordering code (composition see below) B32521N8682+*** B32521N8103+*** B32521N8153+*** B32521N8223+*** B32521N8333+*** Ammo pack pcs./MOQ 4000 4000 3320 3320 2720 Reel pcs./ MOQ 6800 6800 5200 5200 4400 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 13 of 46 B32522 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 15 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 100 63 0.33 0.47 0.68 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 Ordering code (composition see below) B32522C0684+*** B32522C0105+*** B32522C0155+*** B32522C0225+*** B32522C0335+*** B32522C0475+*** B32522C0685+*** B32522C0106+*** B32522C1334+*** B32522C1474+*** B32522C1684+*** B32522C1105+*** B32522Q1105+*** B32522C1155+*** B32522Q1155+*** B32522C1225+*** B32522Q1225+*** B32522C1335+*** B32522Q1335+*** B32522C1475+*** B32522Q1475+*** Ammo pack pcs./MOQ 4680 4680 4680 4680 3840 3320 2720 2560 4680 4680 4680 4680 3840 3840 3320 3320 2720 2720 2560 2560 Reel pcs./ MOQ 5200 5200 5200 5200 4400 3600 2800 2800 5200 5200 5200 5200 4400 4400 3600 3600 2800 2800 2800 2800 2200 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 4000 2000 2000 4000 4000 4000 4000 4000 4000 4000 4000 2000 2000 2000 2000 1200 ∇ ∇ ∇ ∇ ∇ ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 14 of 46 B32522 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 15 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 250 160 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.0 ∇ 1.5 1.5 ∇ 400 200 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 450 200 0.10 ∇ 0.15 ∇ 0.22 ∇ 0.33 ∇ 0.47 ∇ 0.68 ∇ 1.0 ∇ Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 9.0 × 17.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 9.0 × 17.5 × 18.0 9.0 × 17.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 Ordering code (composition see below) B32522C3104+*** B32522C3154+*** B32522C3224+*** B32522C3334+*** B32522C3474+*** B32522C3684+*** B32522C3105+*** B32522N3105+*** B32522C3155+*** B32522N3155+*** B32522E6473+*** B32522E6683+*** B32522E6104+*** B32522E6154+*** B32522E6224+*** B32522E6334+*** B32522E6474+*** B32522E6684+*** B32522N6104+*** B32522N6154+*** B32522N6224+*** B32522N6334+*** B32522N6474+*** B32522N6684+*** B32522N6105+*** Ammo pack pcs./MOQ 4680 4680 4680 4680 3840 3320 2720 2720 2560 2560 4680 4680 4680 4680 3840 3320 2560 2560 4680 4680 3840 3320 2720 2560 Reel pcs./ MOQ 5200 5200 5200 5200 4400 3600 2800 2800 2800 2800 5200 5200 5200 5200 4400 3600 2800 2800 5200 5200 4400 3600 2800 2800 2200 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 4000 2000 2000 2000 2000 4000 4000 4000 4000 4000 4000 2000 2000 4000 4000 4000 4000 2000 2000 1200 ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 15 of 46 B32522 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 15 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 630 200 0.033 ∇ 0.047 ∇ 0.068 ∇ 0.10 ∇ 0.15 ∇ 0.22 ∇ 0.33 ∇ Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 Ordering code (composition see below) B32522Q8333+*** B32522Q8473+*** B32522Q8683+*** B32522Q8104+*** B32522Q8154+*** B32522Q8224+*** B32522Q8334+*** Ammo pack pcs./MOQ 4680 4680 3840 3320 2720 2560 Reel pcs./ MOQ 5200 5200 4400 3600 2800 2800 2200 Untaped pcs./ MOQ 4000 4000 4000 4000 2000 2000 1200 ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 16 of 46 B32523 General purpose (wound) Ordering codes and packing units (lead spacing 22.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 3.3 4.7 6.8 10 15 22 100 63 1.5 2.2 3.3 4.7 6.8 10 15 250 160 0.47 0.68 1.0 1.5 2.2 3.3 400 200 0.22 0.33 0.47 0.68 1.0 1.5 630 200 0.10 0.15 0.22 0.33 0.47 0.68 Max. dimensions w×h×l mm 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 10.5 × 16.5 × 26.5 12.0 × 22.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 16.5 × 26.5 12.0 × 22.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 10.5 × 16.5 × 26.5 11.0 × 20.5 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 16.5 × 26.5 11.0 × 20.5 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 10.5 × 16.5 × 26.5 10.5 × 20.5 × 26.5 12.0 × 22.0 × 26.5 Ordering code (composition see below) B32523R0335+*** B32523R0475+*** B32523R0685+*** B32523R0106+*** B32523R0156+*** B32523R0226+*** B32523Q1155+*** B32523Q1225+*** B32523Q1335+*** B32523Q1475+*** B32523Q1685+*** B32523Q1106+*** B32523Q1156+*** B32523Q3474+*** B32523Q3684+*** B32523Q3105+*** B32523Q3155+*** B32523Q3225+*** B32523Q3335+*** B32523Q6224+*** B32523Q6334+*** B32523Q6474+*** B32523Q6684+*** B32523Q6105+*** B32523Q6155+*** B32523Q8104+*** B32523Q8154+*** B32523Q8224+*** B32523Q8334+*** B32523Q8474+*** B32523Q8684+*** Ammo pack pcs./MOQ 2720 2720 2720 2320 1560 2720 2720 2720 2320 1960 1560 2720 2720 2720 2320 1560 1480 2720 2720 2320 1920 1560 1480 2720 2720 2320 1560 1560 Reel pcs./MOQ 2800 2800 2800 2400 1600 2800 2800 2800 2400 2000 1600 2800 2800 2800 2400 1600 1400 2800 2800 2400 2000 1600 1400 2800 2800 2400 1600 1600 Untaped pcs./MOQ 2880 2880 2880 2520 2160 1800 2880 2880 2880 2540 2040 2160 1800 2880 2880 2880 2520 2160 2040 2880 2880 2520 2040 2160 2040 2880 2880 2520 2160 2160 1800 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% Please read Important notes at the end of this document. *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 Page 17 of 46 1 mm) B32524 General purpose (wound) Ordering codes and packing units (lead spacing 27.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 4.7 6.8 10 15 22 33 47 68 100 100 63 4.7 6.8 10 15 22 33 47 68 250 160 1.5 2.2 3.3 4.7 6.8 10 15 22 33 Max. dimensions w×h×l mm 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 12.5 × 21.5 × 31.5 14.0 × 24.5 × 31.5 18.0 × 27.5 × 31.5 22.0 × 36.5 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 13.5 × 23.0 × 31.5 18.0 × 27.5 × 31.5 19.0 × 30.0 × 31.5 22.0 × 36.5 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 12.5 × 21.5 × 31.5 15.0 × 24.5 × 31.5 19.0 × 30.0 × 31.5 22.0 × 36.5 × 31.5 Ordering code Ammo (composition see pack below) pcs./MOQ B32524R0475+*** B32524Q0685+*** B32524R0106+*** B32524R0156+*** B32524R0226+*** B32524R0336+*** B32524R0476+*** B32524R0686+*** B32524R0107+*** B32524Q1475+*** B32524Q1685+*** B32524Q1106+*** B32524Q1156+*** B32524Q1226+*** B32524Q1336+*** B32524Q1476+*** B32524Q1686+*** B32524Q3155+*** B32524Q3225+*** B32524Q3335+*** B32524Q3475+*** B32524R3685+*** B32524R3106+*** B32524R3156+*** B32524R3226+*** B32524R3336+*** Reel pcs./MOQ 1400 1400 1400 1400 1400 1200 1000 Untaped pcs./MOQ 1280 1280 1280 1280 1280 1120 1040 800 640 1280 1280 1280 1280 1040 800 720 640 1280 1280 1280 1280 1280 1120 960 720 640 1400 1400 1400 1400 1000 1400 1400 1400 1400 1400 1200 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 18 of 46 B32524 General purpose (wound) Ordering codes and packing units (lead spacing 27.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 400 200 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 630 220 0.33 0.47 0.68 1.0 1.5 2.2 Max. dimensions w×h×l mm 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 21.0 × 31.5 14.0 × 24.5 × 31.5 14.0 × 24.5 × 31.5 18.0 × 27.5 × 31.5 22.0 × 36.5 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 14.0 × 24.5 × 31.5 18.0 × 27.5 × 31.5 21.0 × 31.0 × 31.5 Ordering code Ammo (composition see pack below) pcs./MOQ B32524Q6684+*** B32524Q6105+*** B32524Q6155+*** B32524R6225+*** B32524R6335+*** B32524R6475+*** B32524R6685+*** B32524R6106+*** B32524Q8334+*** B32524Q8474+*** B32524Q8684+*** B32524Q8105+*** B32524Q8155+*** B32524Q8225+*** Reel pcs./MOQ 1400 1400 1400 1400 1000 1000 Untaped pcs./MOQ 1280 1280 1280 1280 1040 1040 800 640 1280 1280 1280 1040 800 720 1400 1400 1400 1000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 19 of 46 B32526 General purpose (wound) Ordering codes and packing units (lead spacing 37.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 22 33 47 68 100 150 220 100 63 15 22 33 47 68 100 150 250 160 4.7 6.8 10 15 22 33 47 68 400 200 3.3 4.7 6.8 10 15 22 Max. dimensions w×h×l mm 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 16.0 × 28.5 × 41.5 18.0 × 32.5 × 41.5 20.0 × 39.5 × 41.5 28.0 × 42.5 × 41.5 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 14.0 × 25.0 × 41.5 16.0 × 28.5 × 41.5 18.0 × 32.5 × 41.5 20.0 × 39.5 × 41.5 28.0 × 42.5 × 41.5 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 14.0 × 25.0 × 41.5 16.0 × 28.5 × 41.5 20.0 × 39.5 × 41.5 20.0 × 39.5 × 41.5 28.0 × 42.5 × 41.5 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 14.0 × 25.0 × 41.5 18.0 × 32.5 × 41.5 20.0 × 39.5 × 41.5 28.0 × 42.5 × 41.5 Ordering code Ammo Reel (composition see pack below) pcs./MOQ pcs./MOQ B32526R0226+*** B32526R0336+*** B32526R0476+*** B32526R0686+*** B32526R0107+*** B32526R0157+*** B32526R0227A*** B32526R1156+*** B32526R1226+*** B32526R1336+*** B32526R1476+*** B32526R1686+*** B32526R1107+*** B32526R1157+*** B32526R3475+*** B32526R3685+*** B32526R3106+*** B32526R3156+*** B32526R3226+*** B32526R3336+*** B32526R3476+*** B32526R3686+*** B32526R6335+*** B32526R6475+*** B32526R6685+*** B32526R6106+*** B32526R6156+*** B32526R6226+*** Untaped pcs./MOQ 1620 1620 1620 800 720 640 440 1620 1620 1380 800 720 640 440 1620 1620 1620 1380 800 640 640 440 1620 1620 1380 720 640 440 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% A = 15 ... +5% (220 µF type only) *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Important notes at the end of this document. Page 20 of 46 B32520 ... B32529 General purpose (stacked/wound) Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR CR ≤ 0.1 µF 1 kHz 8 8 10 kHz 15 15 100 kHz 30 VR CR ≤ 0.33 µF ≤ 100 V DC 3750 MΩ ≥ 250 V DC 7500 MΩ 1.4 VR, 2 s TA (°C) DC voltage derating TA ≤ 85 VC = VR 85 0.33 µF 1250 s 2500 s AC voltage derating VC,RMS = VRMS VC,RMS=VRMS (165 TA)/80 AC voltage (max. hours) Vop = 1.0 VC,RMS (2000 h) Vop = 1.0 VC,RMS (1000 h) ≤ 5% ≤ 5 10-3 (at 1 kHz) ≥ 50% of minimum as-delivered values Reliability: Failure rate λ Service life tSL 1 fit (≤ 1 10-9/h) at 0.5 VR, 40 °C 200 000 h at 1.0 VR, 85 °C For conversion to other operating conditions and temperatures, refer to chapter "Quality, 2 Reliability". Short circuit or open circuit Capacitance change ∆C/C Dissipation factor tan δ Insulation resistance Rins or time constant τ = CR Rins Failure criteria: Total failure Failure due to variation of parameters > 10% > 2 upper limit value < 150 MΩ (CR ≤ 0.33 µF) < 50 s (CR > 0.33 µF) Please read Important notes at the end of this document. Page 21 of 46 B32520 ... B32529 General purpose (stacked/wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing 5 mm 7.5 mm Technology S S VR VRMS V DC V AC dV/dt in V/µs 63 40 250 120 100 63 300 150 250 160 400 200 400 200 600 275 450 200 630 400 800 S = Stacked, W = Wound k0 values Lead spacing 5 mm 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm Technology S S S W S W W W W VR VRMS V DC V AC k0 in V2/µs 63 40 30000 15000 6300 3800 375 130 100 100 63 60000 30000 15000 10000 850 800 600 200 250 160 200000 100000 75000 50000 5000 4000 2500 2000 400 200 500000 220000 140000 100000 10000 8500 6000 450 200 15000 630 400 1000000 25000 30000 18000 15000 S = Stacked, W = Wound 10 mm S W 15 mm S W 22.5 mm 27.5 mm 37.5 mm W W W 50 75 150 175 20 30 50 100 125 5 10 20 25 3 4 8 10 15 1 3 5 8.5 12 0.8 1 4 6 Please read Important notes at the end of this document. Page 22 of 46 B32520 ... B32529 General purpose (stacked/wound) Impedance Z versus frequency f (typical values) Please read Important notes at the end of this document. Page 23 of 46 B32529 General purpose (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 5 mm 50 V DC/32 V AC 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC Please read Important notes at the end of this document. Page 24 of 46 B32529 General purpose (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 5 mm 400 V DC/200 V AC 630 V DC/400 V AC Please read Important notes at the end of this document. Page 25 of 46 B32520 General purpose (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Important notes at the end of this document. Page 26 of 46 B32521 General purpose (stacked/wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Important notes at the end of this document. Page 27 of 46 B32521 General purpose (stacked/wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 630 V DC/200 V AC Please read Important notes at the end of this document. Page 28 of 46 B32522 General purpose (stacked/wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Important notes at the end of this document. Page 29 of 46 B32522 General purpose (stacked/wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 450 V DC/200 V AC 630 V DC/200 V AC Please read Important notes at the end of this document. Page 30 of 46 B32523 General purpose (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Important notes at the end of this document. Page 31 of 46 B32523 General purpose (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 630 V DC/200 V AC Please read Important notes at the end of this document. Page 32 of 46 B32524 General purpose (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Important notes at the end of this document. Page 33 of 46 B32524 General purpose (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 630 V DC/220 V AC Please read Important notes at the end of this document. Page 34 of 46 B32526 General purpose (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 37.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Important notes at the end of this document. Page 35 of 46 B32520 ... B32529 General purpose (stacked/wound) Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s