B32601L6333

Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: B32601L ... B32602L October 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polypropylene film capacitors (MKP) High V AC (wound) B32601L ... B32602L Typical applications Electronic ballasts (resonant circuits) SMPS High-frequency AC loads Pulse circuits Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1): 55/110/56 Construction Dielectric: metallized polypropylene (PP) Wound capacitor technology Epoxy resin coating (UL 94 V-0) Features Very high AC voltages for all frequency ranges Very small dimensions High peak voltage for short time periods High peak current High pulse withstand capability Terminals Crimped wire leads, lead-free tinned, lead length (6 1 mm) or min. 20 mm Douple crimped wire leads, lead-free tinned Straight wire leads, lead-free tinned, lead length (17 ±3 mm) Different lead spacings available, lead length (6 1 mm) Marking Manufacturer's logo, style and type, rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (coded) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 25 B32601L ... B32602L High V AC (wound) Dimensional drawings Detail of double crimped version Dimensions in mm Lead spacing ±0.4 10 15 Lead diameter Type d1 0.6 B32601L 0.8 B32602L Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 25 B32601L ... B32602L High V AC (wound) Overview of available types Lead spacing 10 mm Type Page VRMS (V AC) VR (V DC) CR (nF) 1.0 1.2 1.5 2.2 2.7 3.3 3.9 4.10 4.7 5.6 6.2 6.8 8.2 10 12 15 22 33 47 56 68 100 150 220 330 470 680 820 1000 B32601L 5 200 400 250 630 250 500 600 15 mm B32602L 6 160 200 420 250 630 250 500 600 700 1000 1000 1600 250 1000 1300 1600 2000 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 25 B32601L High V AC (wound) Ordering codes and packing units (lead spacing 10 mm) VRMS VR CR f ≤1 kHz V AC V DC nF 200 400 22 33 47 68 100 250 630 15 22 33 47 56 250 1000 4.7 6.8 10 15 22 500 1000 3.3 4.7 6.8 10 12 600 1600 1.2 1.5 2.2 3.3 4.1 Max. dimensions w×h×l mm 6.5 × 11.5 × 13.0 6.5 × 11.5 × 13.0 6.5 × 11.5 × 13.0 7.0 × 11.5 × 13.0 8.0 × 12.5 × 13.0 6.5 × 11.5 × 13.0 6.5 × 11.5 × 13.0 7.0 × 11.5 × 13.0 7.5 × 12.0 × 13.0 8.0 × 12.5 × 13.0 6.5 × 11.0 × 13.0 6.5 × 11.0 × 13.0 6.5 × 11.0 × 13.0 7.0 × 12.0 × 13.0 8.0 × 13.0 × 13.0 6.5 × 11.0 × 13.0 6.5 × 11.0 × 13.0 7.0 × 11.5 × 13.0 8.0 × 12.5 × 13.0 8.5 × 13.0 × 13.0 6.5 × 11.0 × 13.0 6.5 × 11.0 × 13.0 7.0 × 11.5 × 13.0 8.0 × 12.5 × 13.0 8.5 × 13.0 × 13.0 Ordering code (composition see below) B32601L4223+*** B32601L4333+*** B32601L4473+*** B32601L4683+*** B32601L4104+*** B32601L6153+*** B32601L6223+*** B32601L6333+*** B32601L6473+*** B32601L6563+*** B32601L9472+*** B32601L9682+*** B32601L9103+*** B32601L9153+*** B32601L9223+*** B32601L0332+*** B32601L0472+*** B32601L0682+*** B32601L0103+*** B32601L0123+*** B32601L1122+*** B32601L1152+*** B32601L1222+*** B32601L1332+*** B32601L1412+*** Ammo pack pcs./MOQ 2200 2200 2200 2000 1800 2200 2200 2000 2000 1800 2200 2200 2200 2000 1800 2200 2200 2000 1800 1600 2200 2200 2000 1800 1600 Reel pcs./ MOQ 4400 4400 4400 4000 3600 4400 4400 4000 3800 3600 4400 4400 4400 4000 3600 4400 4400 4000 3600 3400 4400 4400 4000 3600 3400 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17±3 mm) 020 = Double crimped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 25 B32602L High V AC (wound) Ordering codes and packing units (lead spacing 15 mm) VRMS VR CR f ≤1 kHz V AC V DC nF 160 250 150 220 330 470 680 820 1000 200 420 68 100 150 220 330 470 250 630 33 47 68 100 150 220 250 1000 10 15 22 33 47 68 100 500 1300 6.8 10 15 22 33 47 Max. dimensions w×h×l mm 6.5 × 11.5 × 18.0 6.5 × 11.5 × 18.0 7.0 × 13.0 × 18.0 7.5 × 15.0 × 18.0 8.5 × 16.5 × 18.0 9.5 × 17.0 × 18.0 11.5 × 16.5 × 18.0 6.5 × 11.5 × 18.0 6.5 × 11.5 × 18.0 7.0 × 13.5 × 18.0 8.0 × 14.5 × 18.0 9.5 × 16.0 × 18.0 11.5 × 17.0 × 18.0 6.5 × 11.5 × 18.0 6.5 × 11.5 × 18.0 7.0 × 13.0 × 18.0 8.0 × 14.0 × 18.0 9.0 × 15.0 × 18.0 10.5 × 17.0 × 18.0 6.5 × 11.5 × 18.0 6.5 × 11.5 × 18.0 6.5 × 11.5 × 18.0 7.0 × 13.0 × 18.0 7.5 × 15.0 × 18.0 8.5 × 16.0 × 18.0 11.0 × 17.0 × 18.0 6.5 × 11.5 × 18.0 7.0 × 11.5 × 18.0 7.0 × 13.0 × 18.0 8.0 × 14.0 × 18.0 9.0 × 15.5 × 18.0 10.5 × 17.0 × 18.0 Ordering code (composition see below) B32602L2154+*** B32602L2224+*** B32602L2334+*** B32602L2474+*** B32602L2684+*** B32602L2824+*** B32602L2105+*** B32602L4683+*** B32602L4104+*** B32602L4154+*** B32602L4224+*** B32602L4334+*** B32602L4474+*** B32602L6333+*** B32602L6473+*** B32602L6683+*** B32602L6104+*** B32602L6154+*** B32602L6224+*** B32602L0103+*** B32602L0153+*** B32602L0223+*** B32602L0333+*** B32602L0473+*** B32602L0683+*** B32602L0104+*** B32602L7682+*** B32602L7103+*** B32602L7153+*** B32602L7223+*** B32602L7333+*** B32602L7473+*** Ammo pack pcs./MOQ 3400 3400 3200 3000 2600 2400 2000 3400 3400 3600 2800 2400 2000 3400 3400 3200 2800 2400 2000 3400 3400 3400 3200 3000 2600 2000 3400 3200 3200 2800 2400 2000 Reel pcs./ MOQ 4400 4400 4000 4000 3400 3200 2600 4400 4400 4000 3600 3200 2600 4400 4400 4000 3600 3200 2600 4400 4400 4400 4000 4000 3400 2600 4400 4000 4000 3600 3200 2600 Untaped pcs./ MOQ 4000 4000 4000 4000 2000 2000 2000 4000 4000 4000 4000 2000 2000 4000 4000 4000 4000 4000 2000 4000 4000 4000 4000 4000 2000 2000 4000 4000 4000 4000 2000 2000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 25 B32602L High V AC (wound) Ordering codes and packing units (lead spacing 15 mm) VRMS VR CR f ≤1 kHz V AC V DC nF 600 1600 4.7 5.6 6.2 6.8 8.2 10 12 15 22 33 700 2000 1.0 1.2 1.5 2.2 2.7 3.3 3.9 4.1 4.7 5.6 6.2 6.8 8.2 10 12 15 22 Max. dimensions w×h×l mm 6.5 × 11.5 × 18.0 6.5 × 11.5 × 18.0 6.5 × 12.0 × 18.0 6.5 × 12.5 × 18.0 7.0 × 12.5 × 18.0 7.0 × 13.5 × 18.0 8.0 × 14.0 × 18.0 8.5 × 14.5 × 18.0 9.5 × 15.5 × 18.0 12.0 × 17.0 × 18.0 6.5 × 12.0 × 18.0 6.5 × 12.0 × 18.0 6.5 × 12.0 × 18.0 7.0 × 12.0 × 18.0 7.0 × 12.0 × 18.0 7.0 × 12.0 × 18.0 7.0 × 12.0 × 18.0 7.0 × 12.0 × 18.0 7.0 × 12.0 × 18.0 7.0 × 12.5 × 18.0 7.0 × 13.0 × 18.0 7.0 × 13.5 × 18.0 7.5 × 14.0 × 18.0 8.5 × 14.5 × 18.0 9.0 × 15.0 × 18.0 9.5 × 16.0 × 18.0 11.5 × 17.0 × 18.0 Ordering code (composition see below) B32602L1472+*** B32602L1562+*** B32602L1622+*** B32602L1682+*** B32602L1822+*** B32602L1103+*** B32602L1123+*** B32602L1153+*** B32602L1223+*** B32602L1333+*** B32602L8102+*** B32602L8122+*** B32602L8152+*** B32602L8222+*** B32602L8272+*** B32602L8332+*** B32602L8392+*** B32602L8412+*** B32602L8472+*** B32602L8562+*** B32602L8622+*** B32602L8682+*** B32602L8822+*** B32602L8103+*** B32602L8123+*** B32602L8153+*** B32602L8223+*** Ammo pack pcs./MOQ 3400 3400 3400 3400 3200 3200 3200 2600 2400 1800 3400 3400 3400 3200 3200 3200 3200 3200 3200 3200 3200 3200 3000 2600 2400 2400 2000 Reel pcs./ MOQ 4400 4400 4400 4400 4000 4000 4000 3400 3200 2400 4400 4400 4400 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3400 3200 3200 2600 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 4000 4000 4000 2000 2000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 2000 2000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 25 B32601L ... B32602L High V AC (wound) Technical data Operating temperature range Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR Dissipation factor tan δ (in 10-3) at CR ≤ 27 nF 27 nF < CR at 20 °C ≤ 0.1 µF (upper limit values) 1 kHz 0.8 0.8 10 kHz 1.0 1.0 100 kHz 2.0 3.0 Insulation resistance Rins or CR ≤ 0.33 µF CR > 0.33 µF time constant τ = CR Rins at 100 GΩ 30000 s 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) 1.6 VR, 2 s DC test voltage Category voltage VC (continuous operation with VDC or VAC at f ≤ 1 kHz) Operating voltage Vop for short operating periods (VDC or VAC at f ≤ 1 kHz) Damp heat test Limit values after damp heat test Reliability: Failure rate λ Service life tSL TA (°C) TA ≤ 85 85 1 µF 0.8 DC voltage derating AC voltage derating VC = VR VC,RMS = VRMS VC = VR (165 TA)/80 VC,RMS=VRMS (165 TA) / 80 DC voltage AC voltage (max. hours) (max. hours) TA ≤ 100 Vop = 1.25 VC (2000 h) Vop=1.0 VC,RMS (2000 h) 100 10% > 4 upper limit values < 1500 MΩ Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 25 B32601L ... B32602L High V AC (wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing VR VRMS V DC V AC 250 160 400 200 630 250 1000 250 1000 500 1300 500 1600 600 2000 700 k0 values Lead spacing VR VRMS V DC V AC 250 160 400 200 630 250 1000 250 1000 500 1300 500 1600 600 2000 700 10 mm dV/dt in V/µs 150 000 200 000 400 000 100 000 120 000 500 000 1 000 000 3 000 000 15 mm 10 mm dV/dt in V/µs 400 540 810 170 200 300 445 1000 15 mm Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 25 B32601L ... B32602L High V AC (wound) Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 25 B32601L High V AC (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤ 100 °C) For TA >100 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 400 V DC/200 V AC 630 V DC/250 V AC 1000 V DC/250 V AC 1000 V DC/500 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 25 B32601L High V AC (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤ 100 °C) For TA >100 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 1600 V DC/600 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 25 B32602L High V AC (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤100 °C) For TA >100 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 250 V DC/160 V AC 420 V DC/200 V AC 630 V DC/250 V AC 1000 V DC/250 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 25 B32602L High V AC (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤100 °C) For TA >100 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 1300 V DC/500 V AC 1600 V DC/600 V AC 2000 V DC/700 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 25 B32601L ... B32602L High V AC (wound) Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s