B32614A1473

Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: B32612 ... B32614 May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polypropylene film capacitors (MKP) High pulse (wound) B32612 ... B32614 Typical applications Electronic ballasts Switch-mode power supplies Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1): 55/100/56 Construction Dielectric: polypropylene (PP) Wound capacitor technology Epoxy resin coating (UL 94 V-0) Features Very high pulse strength Terminals Crimped wire leads, lead-free tinned, lead length (6 1) mm Double crimped wire leads, lead-free tinned Straight wire leads, lead-free tinned, lead length (17 ±3) mm Different lead spacings (reduced and enlarged) available, lead length (6 1) mm Marking Manufacturer's logo, style and type (P61x), rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (code) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 32 B32612 ... B32614 High pulse (wound) Dimensional drawings Detail of double crimped version Dimensions in mm Lead spacing ±0.8 15.0 22.5 27.5 Lead diameter d1 0.8 0.8 0.8 Type B32612 B32613 B32614 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 32 B32612 ... B32614 High pulse (wound) Overview of available types Lead spacing 15.0 mm Type Page VR (V DC) VRMS (V AC) CR (nF) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 Lead configurations Serie Standard Reduced Enlarged Straight Double crimped B32612 7 250 160 400 200 630 250 1000 250 1250 500 1600 500 1600 700 2000 700 B32612 B32613 B32614 15 mm 22.5 mm 27.5 mm 7.5 / 10 / 12.5 mm 15 / 17.5 / 20 mm 25 mm 17.5 mm 25 mm 15 mm 22.5 mm 27.5 mm 15 mm 22.5 mm 27.5 mm Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 32 B32612 ... B32614 High pulse (wound) Overview of available types Lead spacing 22.5 mm Type Page VR (V DC) VRMS (V AC) CR (nF) 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Lead configurations Serie Standard Reduced Enlarged Straight Double crimped B32613 9 250 160 400 200 630 250 1000 250 1600 500 2000 700 2000 1000 B32612 B32613 B32614 15 mm 22.5 mm 27.5 mm 7.5 / 10 / 12.5 mm 15 / 17.5 / 20 mm 25 mm 17.5 mm 25 mm 15 mm 22.5 mm 27.5 mm 15 mm 22.5 mm 27.5 mm Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 32 B32612 ... B32614 High pulse (wound) Overview of available types Lead spacing 27.5 mm Type Page VR (V DC) VRMS (V AC) CR (nF) 10 15 22 33 47 68 100 150 220 470 680 1000 1500 2200 Lead configurations Serie Standard Reduced Enlarged Straight Double crimped B32614 11 250 160 400 200 630 250 1000 250 1600 500 2000 700 B32612 B32613 B32614 15 mm 22.5 mm 27.5 mm 7.5 / 10 / 12.5 mm 15 / 17.5 / 20 mm 25 mm 17.5 mm 25 mm 15 mm 22.5 mm 27.5 mm 15 mm 22.5 mm 27.5 mm Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 32 B32612 High pulse (wound) Ordering codes and packing units (lead spacing 15 mm) VR VRMS CR f ≤1 kHz V DC V AC nF 250 160 150 220 330 470 680 400 200 68 100 150 220 330 470 630 250 68 100 150 220 1000 250 10 15 22 33 47 68 100 Max. dimensions w×h×l mm 6.5 × 12.5 × 18.0 7.0 × 13.5 × 18.0 8.0 × 14.5 × 18.0 9.5 × 16.0 × 18.0 11.5 × 17.5 × 18.0 6.5 × 12.0 × 18.0 7.0 × 12.5 × 18.0 7.5 × 12.5 × 18.0 8.0 × 14.5 × 18.0 9.5 × 16.0 × 18.0 11.0 × 17.5 × 18.0 6.5 × 12.0 × 18.0 7.5 × 13.0 × 18.0 9.0 × 14.5 × 18.0 10.0 × 16.5 × 18.0 7.0 × 12.5 × 18.0 8.0 × 13.5 × 18.0 9.0 × 15.5 × 18.0 6.5 × 13.0 × 18.0 7.0 × 15.5 × 18.0 8.5 × 16.5 × 18.0 11.0 × 17.5 × 18.0 Ordering code (composition see below) B32612A3154+*** B32612A3224+*** B32612A3334+*** B32612A3474+*** B32612A3684+*** B32612A4683+*** B32612A4104+*** B32612A4154+*** B32612A4224+*** B32612A4334+*** B32612A4474+*** B32612A6683+*** B32612A6104+*** B32612A6154+*** B32612A6224+*** B32612A0103+*** B32612A0153+*** B32612A0223+*** B32612A0333+*** B32612A0473+*** B32612A0683+*** B32612A0104+*** Ammo pack pcs./MOQ 3400 3200 2800 2400 2000 3400 3200 3000 2800 2400 2000 3400 3000 2400 2200 3200 2800 2400 3400 3200 2600 2000 Reel pcs./ MOQ 4400 4000 3600 3200 2600 4400 4000 4000 3600 3200 2600 4400 4000 3200 3000 4000 3600 3200 4400 4000 3400 2600 Untaped pcs./ MOQ 4000 4000 2000 2000 2000 4000 4000 4000 2000 2000 2000 4000 4000 2000 2000 4000 4000 4000 4000 4000 2000 2000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17±3 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 Lead spacing (mm) Packaging code 1 mm) Reduced 7.5 mm 030 Reduced 10 mm 040 Reduced 12.5 mm 050 Enlarged 17.5 mm 060 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 32 B32612 High pulse (wound) Ordering codes and packing units (lead spacing 15 mm) VR VRMS CR f ≤1 kHz V DC V AC nF 1250 500 6.8 10 15 22 33 1600 500 4.7 6.8 10 15 1600 700 3.3 4.7 6.8 10 2000 700 1.0 1.5 2.2 3.3 4.7 Max. dimensions w×h×l mm 7.0 × 11.0 × 18.0 7.5 × 13.0 × 18.0 8.0 × 14.0 × 18.0 9.5 × 15.5 × 18.0 11.0 × 17.5 × 18.0 6.5 × 12.0 × 18.0 8.0 × 13.0 × 18.0 9.0 × 14.5 × 18.0 10.0 × 17.5 × 18.0 6.5 × 11.5 × 18.0 7.5 × 12.5 × 18.0 8.5 × 14.5 × 18.0 9.5 × 17.0 × 18.0 7.0 × 10.5 × 18.0 7.5 × 11.5 × 18.0 8.0 × 14.5 × 18.0 8.5 × 15.0 × 18.0 9.5 × 18.0 × 18.0 Ordering code (composition see below) B32612A7682+*** B32612A7103+*** B32612A7153+*** B32612A7223+*** B32612A7333+*** B32612A1472+*** B32612A1682+*** B32612A1103+*** B32612A1153+*** B32612J1332+*** B32612J1472+*** B32612J1682+*** B32612J1103+*** B32612A2102+*** B32612A2152+*** B32612A2222+*** B32612A2332+*** B32612A2472+*** Ammo pack pcs./MOQ 3200 3000 2800 2400 2000 3400 2800 2400 2200 3400 3000 2600 2400 3200 3000 2800 2600 2400 Reel pcs./ MOQ 4000 4000 3600 3200 2600 4400 3600 3200 3000 4400 4000 3400 3200 4000 4000 3600 3400 3200 Untaped pcs./ MOQ 4000 4000 2000 2000 2000 4000 2000 2000 2000 4000 4000 2000 1000 4000 4000 4000 2000 2000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17±3 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 Lead spacing (mm) Packaging code 1 mm) Reduced 7.5 mm 030 Reduced 10 mm 040 Reduced 12.5 mm 050 Enlarged 17.5 mm 060 Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 32 B32613 High pulse (wound) Ordering codes and packing units (lead spacing 22.5 mm) VR VRMS CR f ≤1 kHz V DC V AC nF 250 160 220 330 470 680 1000 400 200 150 220 330 470 680 630 250 100 150 220 330 470 1000 250 33 47 68 100 150 Max. dimensions w×h×l mm 7.0 × 14.5 × 26.5 7.0 × 14.5 × 26.5 8.0 × 15.5 × 26.5 9.5 × 16.0 × 26.5 11.0 × 19.0 × 26.5 7.0 × 13.5 × 26.5 7.0 × 14.0 × 26.5 8.0 × 16.0 × 26.5 9.5 × 16.0 × 26.5 11.5 × 17.5 × 26.5 7.0 × 12.5 × 26.5 7.5 × 14.0 × 26.5 9.0 × 15.5 × 26.5 10.0 × 18.0 × 26.5 11.0 × 20.0 × 26.5 8.5 × 14.5 × 26.5 10.0 × 15.5 × 26.5 11.0 × 17.5 × 26.5 10.0 × 16.5 × 26.5 12.0 × 18.0 × 26.5 Ordering code (composition see below) B32613A3224+*** B32613A3334+*** B32613A3474+*** B32613A3684+*** B32613A3105+*** B32613A4154+*** B32613A4224+*** B32613A4334+*** B32613A4474+*** B32613A4684+*** B32613A6104+*** B32613A6154+*** B32613A6224+*** B32613A6334+*** B32613A6474+*** B32613A0333+*** B32613A0473+*** B32613A0683+*** B32613A0104+*** B32613A0154+*** Ammo pack pcs./MOQ 2000 2000 1800 1400 1200 2000 2000 1800 1400 1200 2000 1800 1600 1400 1200 1600 1400 1200 1400 1200 Reel pcs./ MOQ 2800 2800 2400 2000 1800 2800 2800 2400 2000 1600 2800 2600 2200 2000 1800 2200 2000 1800 2000 1600 Untaped pcs./ MOQ 2000 2000 2000 2000 1000 2000 2000 2000 1000 1000 1000 1000 1000 1000 1000 2000 1000 1000 1000 1000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17±3 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 Lead spacing (mm) Packaging code 1 mm) Reduced 15 mm 055 Reduced 17.5 mm 060 Reduced 20 mm 070 Enlarged 25 mm 080 Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 32 B32613 High pulse (wound) Ordering codes and packing units (lead spacing 22.5 mm) VR VRMS CR f ≤1 kHz V DC V AC nF 1600 500 10 15 22 33 2000 700 3.3 4.7 6.8 10 15 2000 1000 3.3 4.7 6.8 10 Max. dimensions w×h×l mm 7.0 × 13.5 × 26.5 8.0 × 14.5 × 26.5 9.0 × 17.0 × 26.5 10.5 × 18.5 × 26.5 7.0 × 13.0 × 26.5 7.5 × 14.0 × 26.5 8.5 × 16.0 × 26.5 10.5 × 17.0 × 26.5 12.0 × 20.5 × 26.5 8.0 × 14.5 × 26.5 8.5 × 16.5 × 26.5 10.0 × 18.5 × 26.5 11.5 × 21.5 × 26.5 Ordering code (composition see below) B32613A1103+*** B32613A1153+*** B32613A1223+*** B32613A1333+*** B32613A2332+*** B32613A2472+*** B32613A2682+*** B32613A2103+*** B32613A2153+*** B32613A8332+*** B32613A8472+*** B32613A8682+*** B32613A8103+*** Ammo pack pcs./MOQ 2000 1800 1600 1400 2000 1800 1600 1400 1200 1800 1600 1400 1200 Reel pcs./ MOQ 2800 2400 2200 1800 2800 2600 2200 1800 1600 2400 2200 2000 1600 Untaped pcs./ MOQ 2000 2000 1000 1000 2000 2000 2000 1000 1000 2000 1000 1000 1000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17±3 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 Lead spacing (mm) Packaging code 1 mm) Reduced 15 mm 055 Reduced 17.5 mm 060 Reduced 20 mm 070 Enlarged 25 mm 080 Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 32 B32614 High pulse (wound) Ordering codes and packing units (lead spacing 27.5 mm) VR VRMS CR f ≤1 kHz V DC V AC nF 250 160 470 680 1000 1500 2200 400 200 470 680 1000 1500 2200 630 250 470 680 1000 1000 250 100 150 220 1600 500 22 33 47 68 2000 700 10 15 22 33 47 Max. dimensions w×h×l mm 7.0 × 15.0 × 31.5 8.0 × 16.5 × 31.5 9.5 × 17.5 × 31.5 11.5 × 19.5 × 31.5 14.0 × 22.0 × 31.5 9.5 × 15.0 × 31.5 10.0 × 17.5 × 31.5 11.5 × 19.5 × 31.5 14.0 × 22.0 × 31.5 16.5 × 24.5 × 31.5 10.5 × 18.5 × 31.5 12.0 × 21.5 × 31.5 14.0 × 24.0 × 31.5 11.5 × 17.5 × 31.5 13.0 × 21.0 × 31.5 14.5 × 24.5 × 31.5 9.0 × 14.5 × 31.5 10.5 × 16.0 × 31.5 11.0 × 19.5 × 31.5 13.0 × 21.5 × 31.5 9.0 × 15.5 × 31.5 11.0 × 17.5 × 31.5 13.0 × 19.5 × 31.5 14.5 × 23.0 × 31.5 16.5 × 25.5 × 31.5 Ordering code (composition see below) B32614A3474+*** B32614A3684+*** B32614A3105+*** B32614A3155+*** B32614A3225+*** B32614A4474+*** B32614A4684+*** B32614A4105+*** B32614A4155+*** B32614A4225+*** B32614A6474+*** B32614A6684+*** B32614A6105+*** B32614A0104+*** B32614A0154+*** B32614A0224+*** B32614A1223+*** B32614A1333+*** B32614A1473+*** B32614A1683+*** B32614A2103+*** B32614A2153+*** B32614A2223+*** B32614A2333+*** B32614A2473+*** Untaped pcs./MOQ 2000 2000 800 800 800 800 800 800 800 600 800 800 800 2000 800 800 2000 2000 800 800 2000 800 800 800 600 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17±3 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 Lead spacing (mm) Packaging code 1 mm) Reduced 25 mm 090 Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 32 B32612 ... B32614 High pulse (wound) Technical data Max. operating temperature Top,max +110 °C Upper category temperature Tmax +100 °C Lower category temperature Tmin 55 °C Rated temperature TR +85 °C Dissipation factor tan δ (in 10-3) at CR≤0.1 µF 0.1 µF1 µF Operating temperature range at 20 °C (upper limit values) 1 kHz 10 kHz 100 kHz 5.0 0.5 0.8 0.5 1.5 CR ≤ 0.33 µF CR > 0.33 µF Insulation resistance Rins or time constant τ = CR Rins 100 GΩ 30000 s at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage 1.6 VR, 2 s TA (°C) DC voltage derating AC voltage derating Category voltage VC (continuous operation with VDC TA ≤ 85 VC = VR VC,RMS = VRMS or VAC at f ≤ 1 kHz) 85 4 upper limit value Insulation resistance Rins < 1500 MΩ (CR≤0.33 µF) or time constant τ = CR Rins < 500 s (CR>0.33 µF) Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 32 B32612 ... B32614 High pulse (wound) Characteristic voltages VDC, VAC, Vpp VDC V 1000 1250 1600 1600 2000 2000 VAC V 250 500 500 700 700 1000 Vpp V 700 1250 1400 1600 1600 2000 Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 32 B32612 ... B32614 High pulse (wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing VR VRMS V DC V AC 250 160 400 200 630 250 1000 250 1250 500 1600 500 1600 700 2000 700 2000 1000 k0 values Lead spacing VR VRMS V DC V AC 250 160 400 200 630 250 1000 250 1250 500 1600 500 1600 700 2000 700 2000 1000 15 mm k0 in V2/µs 100 000 250 000 500 000 3 000 000 9 000 000 20 000 000 28 000 000 60 000 000 22.5 mm 27.5 mm 15 mm dV/dt in V/µs 200 300 400 975 1850 4500 5200 8000 22.5 mm 27.5 mm 120 180 300 600 1150 2400 7000 7500 50 100 150 300 600 1000 2300 60 000 200 000 350 000 1 500 000 3 750 000 10 000 000 40 000 000 50 000 000 25 000 110 000 250 000 1 000 000 2 000 000 4 000 000 15 000 000 Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 32 B32612 ... B32614 High pulse (wound) Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 32 B32612 High pulse (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 250 V DC/160 V AC 400 V DC/200 V AC 630 V DC/250 V AC 1000 V DC/250 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 32 B32612 High pulse (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 1250 V DC/500 V AC 1600 V DC/500 V AC 1600 V DC/700 V AC 2000 V DC/700 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 32 B32613 High pulse (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 250 V DC/160 V AC 400 V DC/200 V AC 630 V DC/250 V AC 1000 V DC/250 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 32 B32613 High pulse (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 1600 V DC/500 V AC 2000 V DC/700 V AC 2000 V DC/1000 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 32 B32614 High pulse (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 250 V DC/160 V AC 400 V DC/200 V AC 630 V DC/250 V AC 1000 V DC/250 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 32 B32614 High pulse (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 1600 V DC/500 V AC 2000 V DC/700 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 32 B32612 ... B32614 High pulse (wound) Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s