B32620A3153J289

Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: B32620, B32621 Date: June 2018 © TDK Electronics AG 2020. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. Metallized polypropylene film capacitors (MKP) B32620, B32621 High pulse (stacked) Typical applications Compact fluorescent lamps (CFL) SMPS Dimensional drawing Climatic Max. operating temperature: 105 °C Climatic category (IEC 60068-1:2013): 55/100/56 Construction Dielectric: polypropylene (PP) Stacked-film technology Plastic case (UL 94 V-0) Epoxy resin sealing Features Very high pulse strength Very good self-healing properties Smallest possible dimensions High contact reliability RoHS-compatible Dimensions in mm Lead spacing ±0.4 7.5 10.0 1) 0.5 mm for capacitor width w = 4 mm Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Manufacturer's logo, rated capacitance (coded), cap. tolerance (code letter), rated voltage, date of manufacture (coded), for lead spacing 7.5 mm: style (MKP), for lead spacing 10 mm: lot number, series number (621) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“. Please read Cautions and warnings and Important notes at the end of this document. Lead diameter Type d1 ±0.05 0.5 B32620 1) 0.6 B32621 Page 2 of 30 B32620, B32621 High pulse (stacked) Overview of available types Lead spacing 7.5 mm 10.0 mm Type B32620 B32621 Page 4 6 VR (V DC) 160 250 400 630 1000 1000 160 250 400 630 1000 VRMS (V AC) 90 140 200 400 500 600 90 140 200 400 500 CR (nF) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 30 B32620 High pulse (stacked) Ordering codes and packing units (lead spacing 7.5 mm) VR VRMS CR f ≤1 kHz V DC V AC nF 160 90 33 47 68 100 150 250 140 22 33 47 68 100 400 200 6.8 10 15 22 33 630 400 1.5 2.2 3.3 4.7 6.8 10 15 Max. dimensions w×h×l mm 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 Ordering code (composition see below) B32620A5333+*** B32620A5473+*** B32620A5683+*** B32620A5104+*** B32620A5154+*** B32620A3223+*** B32620A3333+*** B32620A3473+*** B32620A3683+*** B32620A3104+*** B32620A4682+*** B32620A4103+*** B32620A4153+*** B32620A4223+*** B32620A4333+*** B32620A6152+*** B32620A6222+*** B32620A6332+*** B32620A6472+*** B32620A6682+*** B32620A6103+*** B32620A6153+*** Ammo pack pcs./MOQ 8000 8000 6400 6400 5200 8000 8000 6400 6400 5200 8000 8000 6400 6400 5200 8000 8000 8000 8000 6400 6400 5200 Reel Untaped pcs./MOQ 7200 7200 5600 5600 4400 7200 7200 5600 5600 4400 7200 7200 5600 5600 4400 7200 7200 7200 7200 5600 5600 4400 pcs./MOQ 6000 6000 4000 4000 3000 6000 6000 4000 4000 3000 6000 6000 4000 4000 3000 6000 6000 6000 6000 4000 4000 3000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 000 = Straight terminals, Untaped (standard lead length 6 1 mm) Page 4 of 30 B32620 High pulse (stacked) Ordering codes and packing units (lead spacing 7.5 mm) VR VRMS CR f ≤1 kHz V DC V AC nF 1000 500 1.5 2.2 3.3 4.7 6.8 1000 600 1.0 1.5 2.2 3.3 4.7 Max. dimensions w×h×l mm 4.0 × 8.5 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 Ordering code (composition see below) B32620A0152+*** B32620A0222+*** B32620A0332+*** B32620A0472+*** B32620A0682+*** B32620J0102+*** B32620J0152+*** B32620J0222+*** B32620J0332+*** B32620J0472+*** Ammo pack pcs./MOQ 8000 8000 6400 6400 5200 6400 6400 6400 6400 5200 Reel Untaped pcs./MOQ 7200 7200 5600 5600 4400 5600 5600 5600 5600 4400 pcs./MOQ 6000 6000 4000 4000 3000 4000 4000 4000 4000 3000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 000 = Straight terminals, Untaped (standard lead length 6 1 mm) Page 5 of 30 B32621 High pulse (stacked) Ordering codes and packing units (lead spacing 10 mm) VR VRMS CR f ≤1 kHz V DC V AC nF 160 90 47 68 100 150 220 250 140 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 400 200 10 15 22 33 47 Max. dimensions w×h×l mm 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 Ordering code (composition see below) B32621A5473+*** B32621A5683+*** B32621A5104+*** B32621A5154+*** B32621A5224+*** B32621A3222+*** B32621A3332+*** B32621A3472+*** B32621A3682+*** B32621A3103+*** B32621A3153+*** B32621A3223+*** B32621A3333+*** B32621A3473+*** B32621A3683+*** B32621A3104+*** B32621A4103+*** B32621A4153+*** B32621A4223+*** B32621A4333+*** B32621A4473+*** Ammo pack pcs./MOQ 4000 4000 3320 3320 2720 4000 4000 4000 4000 4000 4000 4000 4000 4000 3320 2720 4000 4000 3320 3320 2720 Reel Untaped pcs./MOQ 6800 6800 5200 5200 4400 6800 6800 6800 6800 6800 6800 6800 6800 6800 5200 4400 6800 6800 5200 5200 4400 pcs./MOQ 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Intermediate capacitances values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 000 = Straight terminals, Untaped (standard lead length 6 1 mm) Page 6 of 30 B32621 High pulse (stacked) Ordering codes and packing units (lead spacing 10 mm) VR VRMS CR f ≤1 kHz V DC V AC nF 630 400 2.2 3.3 4.7 6.8 10 15 22 33 1000 500 2.2 3.3 4.7 6.8 10 Max. dimensions w×h×l mm 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 Ordering code (composition see below) B32621A6222+*** B32621A6332+*** B32621A6472+*** B32621A6682+*** B32621A6103+*** B32621A6153+*** B32621A6223+*** B32621A6333+*** B32621A0222+*** B32621A0332+*** B32621A0472+*** B32621A0682+*** B32621A0103+*** Ammo pack pcs./MOQ 4000 4000 4000 4000 4000 3320 2720 2720 4000 4000 4000 3320 2720 Reel Untaped pcs./MOQ 6800 6800 6800 6800 6800 5200 4400 4400 6800 6800 6800 5200 4400 pcs./MOQ 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Intermediate capacitances values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 000 = Straight terminals, Untaped (standard lead length 6 1 mm) Page 7 of 30 B32620, B32621 High pulse (stacked) Technical data Operating temperature range Dissipation factor tan δ (in 10-3) at at 20 °C (upper limit values) Insulation resistance Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage Category voltage VC (continuous operation with VDC or VAC at f ≤ 1 kHz) CR ≤ 0.1 μF +105 °C +100 °C 55 °C +85 °C 0.1 μF < CR ≤ 0.22 μF   4.0 1.0 1.5  Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR 1 kHz 10 kHz 100 kHz 100 GΩ 1.6  VR, 2 s Top (°C) DC voltage derating Top ≤ 85 VC = VR 85 < Top ≤100 VC = VR  (165 - Top)/80 Operating voltage Vop for short Top (°C) DC voltage (max. hrs.) operating periods Top ≤ 85 Vop = 1.25  VC (2000 h) (VDC or VAC at f ≤ 1 kHz) 85 < Top ≤100 Vop = 1.25  VC (1000 h) Damp heat test 56 days/40 °C/93% relative humidity Limit values after damp heat Capacitance change ΔC/C test Dissipation factor change Δ tan δ Insulation resistance Rins Reliability: Failure rate λ Service life tSL Failure criteria: Total failure Failure due to variation of parameters Please read Cautions and warnings and Important notes at the end of this document. AC voltage derating VC,RMS = VRMS VC,RMS = VRMS  (165 - Top)/80 AC voltage (max. hrs.) Vop = 1.0  VC,RMS (2000 h) Vop = 1.0  VC,RMS (1000 h) ≤ 3% ≤ 0.5  10-3 (at 1 kHz) ≤ 1.0  10-3 (at 10 kHz) ≥ 50% of minimum as-delivered values 1 fit (≤ 1  10-9/h) at 0.5  VR, 40 °C 200 000 h at 1.0  VR, 85 °C For conversion to other operating conditions and temperatures, refer to chapter "Quality, 2 Reliability". Short circuit or open circuit Capacitance change ΔC/C Dissipation factor tan δ Insulation resistance Rins Page 8 of 30 > ±10% > 4  upper limit value < 1500 MΩ B32620, B32621 High pulse (stacked) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/μs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/μs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing VR VRMS V DC V AC 160 90 250 140 400 200 630 400 1 000 500 1 000 600 7.5 mm 10 mm dV/dt in V/μs 750 1 200 1 500 2 700 3 200 4 000 600 900 1 050 1 800 2 400  7.5 mm 10 mm k0 in V2/μs 240 000 600 000 1 200 000 3 400 000 6 400 000 8 000 000 190 000 450 000 840 000 2 250 000 4 800 000  k0 values Lead spacing VR VRMS V DC V AC 160 90 250 140 400 200 630 400 1 000 500 1 000 600 Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 30 B32620, B32621 High pulse (stacked) Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 30 B32620 High pulse (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 160 V DC/90 V AC 250 V DC/140 V AC 400 V DC/200 V AC 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 30 B32620 High pulse (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 1000 V DC/500 V AC Please read Cautions and warnings and Important notes at the end of this document. 1000 V DC/600 V AC Page 12 of 30 B32621 High pulse (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 160 V DC/90 V AC 250 V DC/140 V AC 400 V DC/200 V AC 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 30 B32621 High pulse (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 1000 V DC/500 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 30 B32620, B32621 High pulse (stacked) Sinus-wave application, lighting Permissible voltage and current / waveform Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 30 B32620 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 7.5 mm 160 V DC/90 V AC 250 V DC/140 V AC 400 V DC/200 V AC 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 30 B32620 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 7.5 mm 1000 V DC/500 V AC Please read Cautions and warnings and Important notes at the end of this document. 1000 V DC/600 V AC Page 17 of 30 B32621 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 10 mm 160 V DC/90 V AC 250 V DC/140 V AC 400 V DC/200 V AC 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 30 B32621 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 10 mm 1000 V DC/500 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 30 B32620, B32621 High pulse (stacked) Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20:2008, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2:2007, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection 1.2 Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20:2008, test Tb, method 1. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing >10 mm) MFP MKP (lead spacing >7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤7.5 mm) MKT uncoated (lead spacing ≤10 mm) insulated (B32559) Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 30 10 ±1 s 5 ±1 s