B32642B6223J

Film Capacitors Double Sided Metallized Polypropylene Film Capacitor MMKP Series/Type: B32641B ... B32642B Date: May 2015 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Double sided metallized polypropylene film capacitor MMKP B32641B ... B32642B High frequency Typical applications Electronic ballasts (resonant circuits) LLC typology in resonant circuits High frequency applications with high current stress Switched-mode power supply Dimensional drawing Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1): 55/100/56 Construction Dielectric: polypropylene (PP) with polyester (PET) Wound capacitor technology Plastic case (UL 94 V-0) Epoxy resin sealing Features Very compact design High pulse strength High current withstand capability Halogen free available on request Dimensions in mm Lead spacing ±0.4 10 15 Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Manufacturer's logo, lot number, series number rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (coded) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“. Please read Important notes at the end of this document. Page 2 of 24 Lead diameter Type d1 ±0.05 0.6 B32641B 0.8 B32642B B32641B ... B32642B High frequency Overview of available types Lead spacing 10 mm 15 mm Type B32641B B32642B Page 4 VR (V DC) 630 1000 630 1000 VRMS (V AC) 400 600 400 600 5 CR (nF) 4.7 6.8 8.2 10 15 18 22 27 33 39 47 56 68 82 100 120 150 Please read Important notes at the end of this document. Page 3 of 24 B32641B High frequency Ordering codes and packing units (lead spacing 10 mm) VR V DC 630 1000 VRMS CR f ≤1 kHz V AC nF 400 6.8 8.2 10 15 18 22 27 33 39 47 600 4.7 6.8 8.2 10 15 18 22 27 33 Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 14.0 × 13.0 7.0 × 16.0 × 13.0 8.0 × 17.5 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 14.0 × 13.0 7.0 × 16.0 × 13.0 8.0 × 17.5 × 13.0 8.0 × 17.5 × 13.0 Ordering code (composition see below) B32641B6682+*** B32641B6822+*** B32641B6103+*** B32641B6153+*** B32641B6183+*** B32641B6223+*** B32641B6273+*** B32641B6333+*** B32641B6393+*** B32641B6473+*** B32641B0472+*** B32641B0682+*** B32641B0822+*** B32641B0103+*** B32641B0153+*** B32641B0183+*** B32641B0223+*** B32641B0273+*** B32641B0333+*** Ammo pack pcs./MOQ 4000 4000 4000 3320 3320 2720 2720 2720   4000 4000 3320 3320 2720 2720    Reel pcs./ MOQ 6800 6800 6800 5200 5200 4400 4400 4400   6800 6800 5200 5200 4400 4400    MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Important notes at the end of this document. *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Page 4 of 24 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 B32642B High frequency Ordering codes and packing units (lead spacing 15 mm) VR V DC 630 1000 VRMS CR f ≤1 kHz V AC nF 400 15 18 22 27 33 39 47 56 68 82 100 120 150 600 10 15 18 22 27 33 39 47 56 68 82 100 Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 6.0 × 12.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 8.5 × 14.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 6.0 × 12.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 8.0 × 14.0 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 11.0 × 18.5 × 18.0 Ordering code (composition see below) B32642B6153+*** B32642B6183+*** B32642B6223+*** B32642B6273+*** B32642B6333+*** B32642B6393+*** B32642B6473+*** B32642B6563+*** B32642B6683+*** B32642B6823+*** B32642B6104+*** B32642B6124+*** B32642B6154+*** B32642B0103+*** B32642B0153+*** B32642B0183+*** B32642B0223+*** B32642B0273+*** B32642B0333+*** B32642B0393+*** B32642B0473+*** B32642B0563+*** B32642B0683+*** B32642B0823+*** B32642B0104K*** Ammo pack pcs./MOQ 4680 4680 4680 4680 4680 3840 3840 3320 2920 2720 2720 2560  4680 4680 4680 3840 3840 3320 2920 2920 2720 2560   Reel pcs./ MOQ 5200 5200 5200 5200 5200 4400 4400 3600 3000 2800 2800 2800 2200 5200 5200 5200 4400 4400 3600 3000 3000 2800 2800 2200 2200 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Important notes at the end of this document. *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Page 5 of 24 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 4000 4000 4000 2000 2000 2000 2000 1200 4000 4000 4000 4000 4000 4000 2000 2000 2000 2000 1200 1200 B32641B ... B32642B High frequency Technical data Reference standard: IEC-60384-16. All data given at T = 20 °C, otherwise is specified. Operating temperature range Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) Insulation resistance Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) Test voltage (terminal to terminal) Test voltage (terminal to case) Category voltage VC (continuous operation with VDC) Operating voltage Vop for short operating periods (VDC) Reliability: Failure rate λ Service life tSL Failure criteria: Total failure Failure due to variation of parameters Please read Important notes at the end of this document. Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR 1 kHz 0.6 10 kHz 0.6 100 kHz 1.5 +110 °C +100 °C 55 °C +85 °C > 100 GΩ 1.6  VR, 2 s 2000 V AC, 60s TA (°C) DC voltage derating TA ≤ 85 VC = VR 85 4  upper limit value < 1500 MΩ B32641B ... B32642B High frequency Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. These parameters are given for isolated pulses in such a way that the heat generated by one pulse will be completely dissipated before applying the next pulse. For a train of pulses, please refer to the curves of permissible AC voltage-current versus frequency. dV/dt values Lead spacing VR VRMS V DC V AC 630 400 1000 600 10 mm 15 mm dV/dt in V/µs 4000 6200 2700 3500 10 mm 15 mm k0 in V2/µs 5 040 000 12 400 000 3 402 000 7 000 000 k0 values Lead spacing VR VRMS V DC V AC 630 400 1000 600 Please read Important notes at the end of this document. Page 7 of 24 B32641B ... B32642B High frequency Impedance Z versus frequency f (typical values) Please read Important notes at the end of this document. Page 8 of 24 B32641B High frequency Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤85 °C) Self-heating TA ≤10 °C, typical values For TA >80 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 630 V DC/400 V AC Please read Important notes at the end of this document. 1000 V DC/600 V AC Page 9 of 24 B32642B High frequency Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤85 °C) Self-heating TA ≤10 °C, typical values For TA >80 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 630 V DC/400 V AC Please read Important notes at the end of this document. 1000 V DC/600 V AC Page 10 of 24 B32641B High frequency Permissible current IRMS versus frequency f (for sinusoidal waveforms, TA ≤85 °C) Self-heating TA ≤10 °C, typical values Lead spacing 10 mm 630 V DC/400 V AC Please read Important notes at the end of this document. 1000 V DC/600 V AC Page 11 of 24 B32642B High frequency Permissible current IRMS versus frequency f (for sinusoidal waveforms, TA ≤85 °C) Self-heating TA ≤10 °C, typical values Lead spacing 15 mm 630 V DC/400 V AC Please read Important notes at the end of this document. 1000 V DC/600 V AC Page 12 of 24 B32641B ... B32642B High frequency Reliability Tests Test and IEC reference Conditions of test Electrical parameters IEC 60384-16 Capacitance: Loss factor: Rapid change of temperature IEC 60384-16 Vibration IEC 60384-16 Bump IEC 60384-16 Climatic sequence IEC 60384-1 Failure criteria Visible |∆C/C| tan δ dama(100kHz) ges 1 KHz, 1.0 V Yes 1 KHz, 1.0 V 100 KHz, 1.0V Voltage proof: 1.6 VR, 1 min Insulation resistance: 500 V, 1 min TA = Lower category temperature Yes TB = Upper category temperature Five cycles, duration t = 30 min 10 Hz ~ 500 Hz Yes 0.75 mm 6 hours per axe 390 m/s2 Yes 6 ms 3 axes, total number of bumps: 4000 Dry heat: 16 hours Yes Damp heat, one cycle Test Aa 2 hours Within specified limits      > 2% > upper limit value > 2% 40 °C/93% relative humidity/56 days Yes > 3% Damp heat, steady state  60 °C/95% relative humidity/ VR DC/1000 hours Yes > 5% Solder bath at +260 °C ±5°C Resistance to soldering heat IEC 60068-2-20 110 °C/1.25 VC/1000 hours Endurance IEC 60384-16 Yes > 2% Yes > 5% 10000 pulses and with 2 times dV/dt Yes according to detail specification > 3% Please read Important notes at the end of this document. Page 13 of 24 1.5 × upper limit as-delivered value value < 50% of min. > 1.5 × upper limit as-delivered value value < 50% of min. > 1.5 × upper limit as-delivered value value < 50% of min. > upper limit value as-delivered value < 50% of min. > 1.5 × upper limit as-delivered value value < 50% of min. > 1.5 × upper limit as-delivered value value B32641B ... B32642B High frequency Construction MMKP 1 2 3 4 5 6 7 Dielectric film: Dielectric film: Dielectric film: Metal spray: Sealing: Case: Terminal: Metallized polyethylene terephthalate (polyester, PET) Polypropylene (PP) Metallized polypropylene (PP) Lead free alloy Epoxy resin sealing PBT, according to UL 94-0 Lead free tinned wire Important note The operating temperature, which is the sum of ambient temperature and self-heating, shall not exceed the upper category temperature (110 °C). To assure this, a derating in the Irms shall be applied as follows: Please read Important notes at the end of this document. Page 14 of 24 B32641B ... B32642B High frequency Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Wetting of wire surface by new solder ≥90%, free-flowing solder 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) Please read Important notes at the end of this document. Page 15 of 24 10 ±1 s 5 ±1 s