B32669C3605

Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: B32669 May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polypropylene film capacitors (MKP) AC applications (wound) B32669 Not suitable for "across the line" applications! Typical applications Energy storage Filtering Climatic Max. operating temperature: 85 °C Climatic category (IEC 60068-1): 40/085/21 Construction Dielectric: polypropylene (PP) Cylindrical winding Insulating sleeve Face ends sealed with epoxy resin Features Good self-healing properties Terminals Axial leads, lead-free tinned Axial leads, insulated, tinned copper wires gathered together by a tin cover (fray), AWG 22 Marking Manufacturer Series number rated capacitance (coded), capacitance tolerance (code letter), rated AC voltage, frequency, date code Delivery mode Bulk (untaped) Dimensional drawing Dimensions in mm When bending leads, take care to leave a clearance of 1 mm to the capacitor body. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 17 B32669 AC applications (wound) Overview of available types Version Page VRMS (V AC) CR (µF) 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10 Tinned leads 4 250 400 Insulated leads 5 250 400 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 17 B32669 AC applications (wound) Ordering codes and packing units (tinned leads) VRMS V AC 250 CR µF 1.0 1.5 2.0 2.5 3.0 4.0 6.0 8.0 10 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 Max. dimensions d×l mm 9.0 × 32.0 11.0 × 32.0 12.5 × 32.0 14.0 × 32.0 15.5 × 32.0 15.0 × 47.0 17.0 × 47.0 19.5 × 47.0 21.5 × 47.0 13.0 × 32.0 15.0 × 32.0 19.0 × 32.0 21.0 × 32.0 18.0 × 47.0 21.0 × 47.0 22.0 × 47.0 25.5 × 47.0 Ordering code (composition see below) B32669C3105+000 B32669C3155+000 B32669C3205+000 B32669C3255+000 B32669C3305+000 B32669C3405+000 B32669C3605+000 B32669C3805+000 B32669C3106+000 B32669B6105+000 B32669B6155+000 B32669B6205+000 B32669B6255+000 B32669B6305+000 B32669B6405+000 B32669B6505+000 B32669B6605+000 Untaped pcs./MOQ 1000 1000 800 800 600 600 400 200 200 1000 800 800 600 600 400 600 200 400 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 17 B32669 AC applications (wound) Ordering codes and packing units (insulated leads) VRMS V AC 250 CR µF 1.0 1.5 2.0 2.5 3.0 4.0 6.0 8.0 10 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 Max. dimensions d×l mm 9.0 × 32.0 11.0 × 32.0 12.5 × 32.0 14.0 × 32.0 15.5 × 32.0 15.0 × 47.0 17.0 × 47.0 19.5 × 47.0 21.5 × 47.0 13.0 × 32.0 15.0 × 32.0 19.0 × 32.0 21.0 × 32.0 18.0 × 47.0 21.0 × 47.0 22.0 × 47.0 25.5 × 47.0 Ordering code (composition see below) B32669S3105+*** B32669S3155+*** B32669S3205+*** B32669S3255+*** B32669S3305+*** B32669S3405+*** B32669S3605+*** B32669S3805+*** B32669S3106+*** B32669S6105+*** B32669S6155+*** B32669S6205+*** B32669S6255+*** B32669S6305+*** B32669S6405+*** B32669S6505+*** B32669S6605+*** Untaped pcs./MOQ 1000 1000 1000 1000 800 800 600 600 600 1000 1000 1000 600 600 600 600 600 400 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Code number for lead version and length: 504 = Insulated leads (lead length 160 mm) 508 = Insulated leads (lead length 65 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 17 B32669 AC applications (wound) Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR 2 10-3 at 1 kHz +85 °C +85 °C 40 °C +85 °C Dissipation factor tan δ at 20 °C (upper limit values) Time constant τ = CR Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage AC test voltage Damp heat test Limit values after damp heat test 2500 s VR = 250 V AC: 430 V DC, 1 s VR = 400 V AC: 700 V DC, 1 s VR = 250 V AC: 440 V AC, 1 s VR = 400 V AC: 700 V AC, 1 s 21 days/40 °C/93% relative humidity Capacitance change ∆C/C Dissipation factor change ∆ tan δ Time constant τ = CR Rins ≤ 3% ≤ 0.5 10-3 (at 1 kHz) ≤ 1.0 10-3 (at 10 kHz) ≥ 50% of minimum as-delivered values Pulse handling capability (rate of voltage rise Vpp/τ) ≤ 10 V/µs Permissible AC voltage VRMS versus frequency f Values can be obtained on request. In specific cases please provide a scaled voltage/ time graph and state operating conditions. Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 17 B32669 AC applications (wound) Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s