B32672P5105J000

Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: B32671P ... B32673P Date: November 2019 © TDK Electronics AG 2020. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. Metallized polypropylene film capacitors (MKP) B32671P ... B32673P Power Factor Correction Typical applications PFC (Power Factor Correction) Dimensional drawing Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1:2013): 55/110/56 Construction Dielectric: polypropylene (PP) Wound capacitor technology Plastic case (UL 94 V-0) Epoxy resin sealing Dimensions in mm Features Very compact design Very small dimensions Very high ripple and peak current High frequency AC operation capability High voltage capability Excellent self-healing property RoHS-compatible Halogen-free capacitors available on request AEC-Q200D compliant Lead spacing ±0.4 10 15 22.5 Terminals Parallel wire leads, lead free, tinned Special lead lengths available on request Marking Manufacturer's logo Lot number, series number Rated capacitance (coded) Capacitance tolerance (code letter) Rated DC voltage Date of manufacture (coded) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 28 Lead diameter d1 ±0.05 0.6 0.8 0.8 Type B32671P B32672P B32673P B32671P ... B32673P Power Factor Correction Overview of available types Lead spacing 10 mm 15 mm 22.5 mm Type B32671P B32672P B32673P Page 4 5 6 VRMS (V AC) 160 200 200 160 200 200 160 200 200 VR (V DC) 450 520 630 450 520 630 450 520 630 CR (μF) 0.068 0.082 0.10 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 1.0 1.5 2.0 2.2 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 28 B32671P Power Factor Correction Ordering codes and packing units (lead spacing 10 mm) VR V DC 450 520 630 VRMS CR f ≤1 kHz V AC μF 160 0.10 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.68 1.0 200 0.082 0.10 0.15 0.22 0.33 0.47 200 0.068 0.082 0.10 0.15 0.18 0.22 0.33 0.39 Ordering code (composition see below) B32671P4104+*** B32671P4154+*** B32671P4184+*** B32671P4224+*** B32671P4274+*** B32671P4334+*** B32671P4394+*** B32671P4474+*** B32671P4684+*** B32671P4105+*** B32671P5823+*** B32671P5104+*** B32671P5154+*** B32671P5224+*** B32671P5334+*** B32671P5474+*** B32671P6683+*** B32671P6823+*** B32671P6104+*** B32671P6154+*** B32671P6184+*** B32671P6224+*** B32671P6334+*** B32671P6394+*** Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 14.0 × 13.0 7.0 × 16.0 × 13.0 8.0 × 17.5 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 7.0 × 16.0 × 13.0 8.0 × 17.5 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 14.0 × 13.0 8.0 × 17.5 × 13.0 8.0 × 17.5 × 13.0 Ammo pack pcs./MOQ 4000 4000 3320 3320 3320 2720 2720 2720   4000 3320 3320 2720   4000 3320 3320 2720 2720 2720   Reel Untaped pcs./MOQ 6800 6800 5200 5200 5200 4400 4400 4400   6800 5200 5200 4400   6800 5200 5200 4400 4400 4400   pcs./MOQ 4000 4000 4000 4000 4000 4000 4000 4000 4000 2000 4000 4000 4000 4000 4000 2000 4000 4000 4000 4000 4000 4000 2000 2000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerance on request. Composition of ordering code + = Capacitance tolerance code: J = ±5% K = ±10% M = ±20% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ± 0.3 mm) 000 = Straight terminals, untaped (lead length 61 mm) Page 4 of 28 B32672P Power Factor Correction Ordering codes and packing units (lead spacing 15 mm) VR V DC 450 520 630 VRMS CR f ≤1 kHz V AC μF 160 0.10 0.22 0.33 0.47 0.56 0.68 1.0 1.5 2.0 2.2 200 0.15 0.22 0.33 0.47 0.68 1.0 1.5 200 0.15 0.22 0.33 0.47 0.68 1.0 Ordering code (composition see below) B32672P4104+*** B32672P4224+*** B32672P4334+*** B32672P4474+*** B32672P4564+*** B32672P4684+*** B32672P4105+*** B32672P4155+*** B32672P4205+*** B32672P4225+*** B32672P5154+*** B32672P5224+*** B32672P5334+*** B32672P5474+*** B32672P5684+*** B32672P5105+*** B32672P5155+*** B32672P6154+*** B32672P6224+*** B32672P6334+*** B32672P6474+*** B32672P6684+*** B32672P6105+*** Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 6.0 × 12.0 × 18.0 7.0 × 12.5 × 18.0 9.0 × 17.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 Ammo pack pcs./MOQ 4680 4680 4680 4680 3840 3840 3320 2560 2560  4680 4680 3840 3320 2720 2560  4680 3840 3320 2920 2560  Reel Untaped pcs./MOQ 5200 5200 5200 5200 4400 4400 3600 2800 2800 2200 5200 5200 4400 3600 2800 2800 2200 5200 4400 3600 3000 2800 2200 pcs./MOQ 4000 4000 4000 4000 4000 4000 4000 2000 2000 1200 4000 4000 4000 4000 2000 2000 1200 4000 4000 4000 2000 2000 1200 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerance on request. Composition of ordering code + = Capacitance tolerance code: J = ±5% K = ±10% M = ±20% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ± 0.3 mm) 000 = Straight terminals, untaped (lead length 61 mm) Page 5 of 28 B32673P Power Factor Correction Ordering codes and packing units (lead spacing 22.5 mm) VR V DC 450 520 630 VRMS CR f ≤1 kHz V AC μF 160 1.0 1.5 2.2 200 0.47 0.56 0.68 1.0 1.5 2.2 200 0.33 0.47 0.56 0.68 1.0 1.5 2.2 Ordering code (composition see below) B32673P4105+*** B32673P4155+*** B32673P4225+*** B32673P5474+*** B32673P5564+*** B32673P5684+*** B32673P5105+*** B32673P5155+*** B32673P5225+*** B32673P6334+*** B32673P6474+*** B32673P6564+*** B32673P6684+*** B32673P6105+*** B32673P6155+*** B32673P6225+*** Max. dimensions w×h×l mm 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 8.5 × 16.5 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 10.5 × 16.5 × 26.5 10.5 × 20.5 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 18.5 × 26.5 12.0 × 22.0 × 26.5 Ammo pack pcs./MOQ 2720 2320 1920 2720 2720 2720 2320 1560  2720 2720 2720 2320 1920 1560  Reel Untaped pcs./MOQ 2800 2400 2000 2800 2800 2800 2400 1600  2800 2800 2800 2400 2000 1600  pcs./MOQ 2880 2520 2040 2880 2880 2880 2520 2160 2160 2880 2880 2880 2520 2040 2160 1800 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerance on request. Composition of ordering code + = Capacitance tolerance code: J = ±5% K = ±10% M = ±20% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Untaped (lead length 3.2 ± 0.3 mm) 000 = Untaped (lead length 61 mm) Page 6 of 28 B32671P ... B32673P Power Factor Correction Technical data Reference standard: IEC 60384-16:2005 and AEC-Q200D. All data given at T = 20 °C, unless otherwise specified. Rated temperature TR +85 °C Operating temperature range Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) Insulation resistance Rins at 100 V or time constant τ = CR  Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) Max. operating temperature Top, max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR at 1 kHz: 1.0 at 10 kHz: 2.5 at 100 kHz: 25.0 +125 °C +110 °C 55 °C +85 °C 30 GΩ (CR ≤ 0.33 μF) 10000 s (CR > 0.33 μF) 1.4  VR, 2 s Category voltage VC Top (°C) DC voltage derating AC voltage derating (continuous operation with Top ≤85 V C = VR VC,RMS = VRMS VDC or VAC at f ≤ 1 kHz) 85 4  upper limit values Insulation resistance Rins < 150 MΩ (CR ≤ 0.33 μF) < 50 s (CR ≥ 0.33 μF) Or time constant τ DC test voltage Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 28 B32671P ... B32673P Power Factor Correction Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/μs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/μs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. These parameters are given for isolated pulses in such a way that the heat generated by one pulse will be completely dissipated before applying the next pulse. For a train of pulses, please refer to the curves of permissible AC voltage-current versus frequency. dV/dt values Lead spacing VR VRMS V DC V AC 450 160 520 200 630 200 10 mm 15 mm 22.5 mm dV/dt in V/μs 140 200 250 120 160 180 100 110 130 10 mm 15 mm 22.5 mm k0 in V2/μs 126000 208000 315000 108000 166000 226000 90000 114000 163000 k0 values Lead spacing VR VRMS V DC V AC 450 160 520 200 630 200 Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 28 B32671P ... B32673P Power Factor Correction Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 28 B32671P Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤100 °C) For TA >100 °C, please use derating factor FT. Lead spacing 10 mm 450 V DC/160 V AC 520 V DC/200 V AC 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 28 B32672P Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤100 °C) For TA >100 °C, please use derating factor FT. Lead spacing 15 mm 450 V DC/160 V AC 520 V DC/200 V AC 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 28 B32673P Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤100 °C) For TA >100 °C, please use derating factor FT. Lead spacing 22.5 mm 450 V DC/160 V AC 520 V DC/200 V AC 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 28 B32671P Power Factor Correction Permissible AC current IRMS versus frequency f (for sinusoidal waveforms TA ≤100 °C) For TA >100 °C, please use derating factor FT. Lead spacing 10 mm 450 V DC/160 V AC 520 V DC/200 V AC 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 28 B32672P Power Factor Correction Permissible AC current IRMS versus frequency f (for sinusoidal waveforms TA ≤100 °C) For TA >100 °C, please use derating factor FT. Lead spacing 15 mm 450 V DC/160 V AC 520 V DC/200 V AC 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 28 B32673P Power Factor Correction Permissible AC current IRMS versus frequency f (for sinusoidal waveforms TA ≤100 °C) For TA >100 °C, please use derating factor FT. Lead spacing 22.5 mm 450 V DC/160 V AC 520 V DC/200 V AC 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 28 B32671P ... B32673P Power Factor Correction Maximum AC voltage (VRMS), current (IRMS) versus frequency and temperature for TA >100 °C The graphs described in the previous section for the permissible AC voltage (VRMS) or current (IRMS) versus frequency are given for a maximum ambient temperature TA ≤100 ºC. In case of higher ambient temperatures (TA), the self-heating (ΔT) of the component must be reduced to avoid that temperature of the component (Top= TA + ΔT) reaches values above maximum operating temperature.The factor FT shall be applied in the following way: And FT is given by the following curve: Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 28 B32671P ... B32673P Power Factor Correction Testing and Standards Test Reference Conditions of test Performance requirements Electrical parameters IEC 60384-16:2005 Within specified limits Robustness of terminations IEC 60068-2-21:2006 Voltage proof, 1.4 VR, 1 minute Insulation resistance, Rins Capacitance, C Dissipation factor, tan δ Tensile strength (test Ua1) Wire diameter Tensile force 0.5 < d1 ≤ 0.8 mm 10 N Capacitance and tan δ within specified limits Solder bath temperature at 260 ±5 °C, ΔC/C0 ≤ 2% Resistance to IEC 60068-2-20:2008, immersion for 10 seconds soldering Δ tan δ ≤ 0.001 test Tb, heat method 1A ΔC/C0 ≤ 2% Rapid IEC TA = lower category temperature Δ tan δ ≤ 0.002 change of 60384-16:2005 TB = upper category temperature Rins ≥ 50% of initial limit temperature Five cycles, duration t = 30 min. Vibration IEC 60384-16:2005 Test FC: vibration sinusoidal Displacement: 0.75 mm Accleration: 98 m/s2 Frequency: 10 Hz ... 500 Hz Test duration: 3 orthogonal axes, 2 hours each axe No visible damage Bump IEC 60384-16:2005 Test Eb: Total 4000 bumps with 390 m/s2 mounted on PCB No visible damage ΔC/C0 ≤ 2% Δ tan δ ≤ 0.001 Rins ≥ 50% of initial limit No visible damage ΔC/C0 ≤ 2% Δ tan δ ≤ 0.001 Rins ≥ 50% of initial limit Duration: 6 ms Climatic sequence IEC 60384-16:2005 Damp heat, steady state IEC 60384-16:2005 Advanced biased humidity Please read Cautions and warnings and Important notes at the end of this document. Dry heat Tb / 16 h Damp heat cyclic, 1st cycle +55 °C / 24 h / 95% ... 100% RH Cold Ta / 2 h Damp heat cyclic, 5 cycles +55 °C / 24 h / 95% ... 100% RH Test Ca 40 °C / 93% RH / 56 days 60 °C / 95% RH / 1000 hours with VR,DC Page 17 of 28 No visible damage ΔC/C0 ≤ 3% Δ tan δ ≤ 0.003 Rins ≥ 50% of initial limit No visible damage ΔC/C0 ≤ 10% Δ tan δ ≤ 0.004 Rins ≥ 50% of initial limit B32671P ... B32673P Power Factor Correction Test Reference Endurance A Endurance B Endurance C Endurance D Conditions of test Performance requirements No visible damage 85 °C / 1.1 VR / 1000 hours ΔC/C0 ≤ 5% Δ tan δ ≤ 0.004 Rins ≥ 50% of initial limit No visible damage 110 °C / 1.1 VC / 1000 hours ΔC/C0 ≤ 10% Δ tan δ ≤ 0.004 Rins ≥ 50% of initial limit No visible damage 125 °C / 1.1 VC / 1000 hours ΔC/C0 ≤ 10% Δ tan δ ≤ 0.004 Rins ≥ 50% of initial limit 85 °C/ VR + 4 ARMS,1000 KHz/ 1000 hours No visible damage ΔC/C0 ≤ 10% Δ tan δ ≤ 0.004 Rins ≥ 50% of initial limit Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Please read Cautions and warnings and Important notes at the end of this document. Wetting of wire surface by new solder ≥90%, free-flowing solder Page 18 of 28 B32671P ... B32673P Power Factor Correction 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing >10 mm) MFP MKP (lead spacing >7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤7.5 mm) MKT uncoated (lead spacing ≤10 mm) insulated (B32559) 10 ±1 s 5 ±1 s