B32672Z5334J289

Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: B32671Z ... B32676Z Date: June 2018 © EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Metallized polypropylene film capacitors (MKP) B32671Z ... B32676Z Power Factor Correction Typical applications PFC (Power Factor Correction) Not suitable for "across the line" applications Dimensional drawing Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1:2013): 55/110/56 Construction Dielectric: metallized polypropylene (PP) Wound capacitor technology Plastic case (UL 94 V-0) Epoxy resin sealing, flame retardant Dimensions in mm Features High frequency capability Very small dimensions RoHS-compatible Halogen-free capacitors available on request AEC-Q200D compliant Lead spacing ±0.4 10 15 22.5 27.5 37.5 Terminals Parallel wire leads, lead-free tinned Marking Manufacturer's logo Rated capacitance (coded) Capacitance tolerance Rated DC voltage Type number Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 46 Lead diameter d1 ±0.05 0.6 0.8 0.8 0.8 1.0 Type B32671Z B32672Z B32673Z B32674Z B32676Z B32671Z ... B32676Z Power Factor Correction Overview of available types Lead spacing 10 mm 15 mm 22.5 mm Type B32671Z B32672Z B32673Z Page 5 6 7 VRMS (V AC) 310 220 277 310 220 277 310 VR (V DC) 630 450 520 630 450 520 630 CR (μF) 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.12 0.15 0.22 0.33 0.47 0.56 0.68 1.0 1.2 1.5 2.2 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 46 B32671Z ... B32676Z Power Factor Correction Overview of available types Lead spacing 27.5 mm 37.5 mm Type B32674Z B32676Z Page 8 9 VRMS (V AC) 220 277 310 220 277 310 VR (V DC) 450 520 630 450 520 630 CR (μF) 1.0 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 46 B32671Z Power Factor Correction Ordering codes and packing units (lead spacing 10 mm) VRMS VR CR f ≤1 kHz V AC V DC μF 310 630 0.010 0.015 0.022 0.033 0.047 0.068 0.10 Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 Ordering code (composition see below) B32671Z6103+*** B32671Z6153+*** B32671Z6223+*** B32671Z6333+*** B32671Z6473+*** B32671Z6683+*** B32671Z6104+*** Ammo pack pcs./MOQ 4000 4000 4000 3320 3320 2720 2720 Reel Untaped pcs./MOQ 6800 6800 6800 5200 5200 4400 4400 pcs./MOQ 4000 4000 4000 4000 4000 4000 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerance on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 000 = Straight terminals, untaped (standard lead length 6 1 mm) 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 289 = Straight terminals, Ammo pack Page 5 of 46 B32672Z Power Factor Correction Ordering codes and packing units (lead spacing 15 mm) VRMS VR CR f ≤1 kHz V AC V DC μF 220 450 0.10 0.15 0.22 0.33 0.47 0.68 1.0 277 520 0.047 0.10 0.15 0.22 0.33 0.47 0.68 1.0 310 630 0.033 0.047 0.068 0.10 0.12 0.15 0.33 0.33 0.47 0.56 Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 11.0 × 18.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 6.0 × 11.0 × 18.0 6.0 × 12.0 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 11.0 × 18.5 × 18.0 Ordering code (composition see below) B32672Z4104+*** B32672Z4154+*** B32672Z4224+*** B32672Z4334+*** B32672Z4474+*** B32672Z4684+*** B32672Z4105+*** B32672Z5473+*** B32672Z5104+*** B32672Z5154+*** B32672Z5224+*** B32672Z5334+*** B32672Z5474+*** B32672Z5684+*** B32672Z5105K*** B32672Z6333+*** B32672Z6473+*** B32672Z6683+*** B32672Z6104+*** B32672Z6124+*** B32672Z6154+*** B32672Y6334K*** B32672Z6334+*** B32672Z6474+*** B32672Z6564+*** Ammo pack pcs./MOQ 4680 4680 3840 3320 2920 2560  4680 3840 3840 3320 2720 2560   4680 4680 4680 3840 3840 3840 2720 2560   Reel Untaped pcs./MOQ 5200 5200 4400 3600 3000 2800 2200 5200 4400 4400 3600 2800 2800 2000 2200 5200 5200 5200 4400 4400 4400 2800 2800 2000 2200 pcs./MOQ 4000 4000 4000 4000 2000 2000 1200 4000 4000 4000 4000 2000 2000 1200 1200 4000 4000 4000 4000 4000 4000 2000 2000 1200 1200 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerance on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 000 = Straight terminals, untaped (standard lead length 6 1 mm) 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 289 = Straight terminals, Ammo pack Page 6 of 46 B32673Z Power Factor Correction Ordering codes and packing units (lead spacing 22.5 mm) VRMS VR CR f ≤1 kHz V AC V DC μF 220 450 0.22 0.22 0.33 0.33 0.47 0.47 0.68 0.68 1.0 1.5 2.2 277 520 0.22 0.22 0.33 0.33 0.47 0.47 0.68 1.0 1.5 310 630 0.15 0.22 0.33 0.33 0.47 0.68 1.0 1.2 1.5 2.2 Max. dimensions w×h×l mm 6.0 × 15.0 × 26.5 7.5 × 14.0 × 26.5 6.0 × 15.0 × 26.5 7.5 × 14.0 × 26.5 6.0 × 15.0 × 26.5 7.5 × 14.0 × 26.5 7.0 × 16.0 × 26.5 7.5 × 14.0 × 26.5 10.5 × 16.5 × 26.5 11.0 × 20.5 × 26.5 12.0 × 22.5 × 26.5 6.0 × 15.0 × 26.5 7.5 × 14.0 × 26.5 6.0 × 15.0 × 26.5 7.5 × 14.0 × 26.5 7.0 × 16.0 × 26.5 7.5 × 14.0 × 26.5 10.5 × 16.5 × 26.5 10.5 × 16.5 × 26.5 12.0 × 22.5 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 7.5 × 14.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 18.5 × 26.5 11.0 × 20.5 × 26.5 12.0 × 22.0 × 26.5 14.0 × 29.5 × 26.5 14.0 × 29.5 × 26.5 Ordering code (composition see below) B32673Z4224+*** B32673T4224K*** B32673Z4334+*** B32673T4334K*** B32673Z4474+*** B32673T4474K*** B32673Z4684+*** B32673T4684+*** B32673Z4105+*** B32673Z4155+*** B32673Z4225+*** B32673Z5224+*** B32673T5224K*** B32673Z5334+*** B32673T5334K*** B32673Z5474+*** B32673T5474K*** B32673Z5684+*** B32673Z5105+*** B32673Z5155+*** B32673Z6154+*** B32673Z6224+*** B32673Z6334+*** B32673T6334+*** B32673Z6474+*** B32673Z6684+*** B32673Z6105+*** B32673Z6125+*** B32673Z6155+*** B32673Z6225+*** Ammo pack pcs./MOQ 2720 2200 2720 2200 2720 2200 2320 2200 1560 1480  2720 2200 2720 2200 2320 2200 1560   2720 2720 2820 2200 1920 1560 1480    Reel Untaped pcs./MOQ 2800 2000 2800 2000 2800 2000 2400 2000 1600 1400  2800 2000 2800 2000 2400 2000 1600   2800 2800 2400 2000 2000 1600 1400    pcs./MOQ 2880 2280 2880 2280 2880 2280 2520 2280 2160 2040 1800 2880 2280 2880 2280 2520 2280 2160 2160 1800 2880 2880 2520 2280 2040 2160 2040 1800 2160 2160 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerance on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 000 = Straight terminals, untaped (standard lead length 6 1 mm) 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 289 = Straight terminals, Ammo pack Page 7 of 46 B32674Z Power Factor Correction Ordering codes and packing units (lead spacing 27.5 mm) VRMS VR CR f ≤1 kHz V AC V DC μF 220 450 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 277 520 1.0 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 310 630 1.0 1.5 1.8 2.2 2.7 3.3 3.9 4.7 Max. dimensions w×h×l mm 11.0 × 19.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 13.5 × 23.0 × 31.5 14.0 × 24.5 × 31.5 16.0 × 32.0 × 31.5 16.0 × 32.0 × 31.5 18.0 × 33.0 × 31.5 21.0 × 31.0 × 31.5 22.0 × 36.5 × 31.5 11.0 × 19.0 × 31.5 12.5 × 21.5 × 31.5 13.5 × 23.0 × 31.5 15.0 × 24.5 × 31.5 18.0 × 27.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 33.0 × 31.5 21.0 × 31.0 × 31.5 22.0 × 36.5 × 31.5 11.0 × 19.0 × 31.5 13.5 × 23.0 × 31.5 14.0 × 24.5 × 31.5 16.0 × 32.0 × 31.5 16.0 × 32.0 × 31.5 18.0 × 33.0 × 31.5 21.0 × 31.0 × 31.5 22.0 × 36.5 × 31.5 Ordering code (composition see below) B32674Z4155+*** B32674Z4185+*** B32674Z4225+*** B32674Z4275+*** B32674Z4335+*** B32674Z4395+*** B32674Z4475+*** B32674Z4565K*** B32674Z4685+*** B32674Z4825+*** B32674Z5105+*** B32674Z5155+*** B32674Z5185+*** B32674Z5225+*** B32674Z5275+*** B32674Z5335K*** B32674Z5395+*** B32674Z5475+*** B32674Z5565+*** B32674Z6105+*** B32674Z6155+*** B32674Z6185+*** B32674Z6225+*** B32674Z6275K*** B32674Z6335+*** B32674Z6395+*** B32674Z6475+*** Ammo pack pcs./MOQ                            Reel Untaped pcs./MOQ 1400 2800 2800 1000 1000      1400 1200 1000       1400 1000 1000      pcs./MOQ 1280 1280 1280 1040 1040 880 880 880 720 640 1280 1120 1040 960 800 880 800 720 640 1280 1040 1040 880 880 800 720 640 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerance on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 000 = Straight terminals, untaped (standard lead length 6 1 mm) 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 289 = Straight terminals, Ammo pack Page 8 of 46 B32676Z Power Factor Correction Ordering codes and packing units (lead spacing 37.5 mm) VRMS VR CR f ≤1 kHz V AC V DC μF 220 450 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 277 520 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 Max. dimensions w×h×l mm 12.0 × 22.0 × 42.0 12.0 × 22.0 × 42.0 14.0 × 25.0 × 42.0 14.0 × 25.0 × 42.0 16.0 × 28.5 × 42.0 16.0 × 28.5 × 42.0 18.0 × 32.5 × 42.0 20.0 × 39.5 × 42.0 20.0 × 39.5 × 42.0 20.0 × 39.5 × 42.0 28.0 × 42.5 × 42.0 30.0 × 45.0 × 42.0 33.0 × 48.0 × 42.0 12.0 × 22.0 × 42.0 14.0 × 25.0 × 42.0 14.0 × 25.0 × 42.0 16.0 × 28.5 × 42.0 18.0 × 32.5 × 42.0 18.0 × 32.5 × 42.0 20.0 × 39.5 × 42.0 20.0 × 39.5 × 42.0 28.0 × 37.0 × 42.0 28.0 × 42.5 × 42.0 33.0 × 48.0 × 42.0 Ordering code (composition see below) B32676Z4225+*** B32676Z4275+*** B32676Z4335+*** B32676Z4395+*** B32676Z4475+*** B32676Z4565+*** B32676Z4685+*** B32676Z4825+*** B32676Z4106+*** B32676Z4126+*** B32676Z4156+*** B32676Z4186+*** B32676Z4226+*** B32676Z5225+*** B32676Z5275+*** B32676Z5335+*** B32676Z5395+*** B32676Z5475+*** B32676Z5565+*** B32676Z5685+*** B32676Z5825K*** B32676Z5106+*** B32676Z5126K*** B32676Z5156+*** Ammo pack pcs./MOQ                         Reel Untaped pcs./MOQ                         pcs./MOQ 1620 1620 1380 1380 800 800 720 640 640 640 440 400 180 1620 1380 1380 800 720 720 640 640 440 440 180 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerance on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 000 = Straight terminals, untaped (standard lead length 6 1 mm) 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 289 = Straight terminals, Ammo pack Page 9 of 46 B32676Z Power Factor Correction Ordering codes and packing units (lead spacing 37.5 mm) VRMS VR CR f ≤1 kHz V AC V DC μF 310 630 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 Max. dimensions w×h×l mm 14.0 × 25.0 × 42.0 14.0 × 25.0 × 42.0 14.0 × 25.0 × 42.0 16.0 × 28.5 × 42.0 18.0 × 32.5 × 42.0 18.0 × 32.5 × 42.0 20.0 × 39.5 × 42.0 20.0 × 39.5 × 42.0 28.0 × 37.0 × 42.0 28.0 × 42.5 × 42.0 30.0 × 45.0 × 42.0 33.0 × 48.0 × 42.0 Ordering code (composition see below) B32676Z6185+*** B32676Z6225+*** B32676Z6275+*** B32676Z6335+*** B32676Z6395+*** B32676Z6475+*** B32676Z6565+*** B32676Z6685+*** B32676Z6825+*** B32676Z6106+*** B32676Z6126+*** B32676Z6156+*** Ammo pack pcs./MOQ             Reel Untaped pcs./MOQ             pcs./MOQ 1380 1380 1380 800 720 720 640 640 440 440 400 180 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerance on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 000 = Straight terminals, untaped (standard lead length 6 1 mm) 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 289 = Straight terminals, Ammo pack Page 10 of 46 B32671Z ... B32676Z Power Factor Correction Technical data Reference standard: IEC 60384-16:2005 and AEC-Q200D. All data otherwise specified. Operating temperature range Max. operating temperature Top, max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR -3) CR ≤ 0.1 μF Dissipation factor tan δ (in 10 at 20 °C (upper limit values) at 1 kHz ≤ 1 (typically 0.6) 100 kHz 5.0 Insulation resistance Rins > 30 000 MΩ (CR ≤ 0.33 μF) > 10 000 s (CR > 0.33 μF) or time constant τ = CR  Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage Category voltage VC continuous operation with VDC or VAC at f ≤ 1 kHz short time operation with V DC or VAC at f ≤1kHz Operating voltage Vop for short operating periods (VDC or VAC at f ≤ 1 kHz) Passive flammability category in accordance to IEC 40(CO)752 Biased humidity Limit values after test Reliability: Failure rate λ Service life tSL Failure criteria: Total failure Failure due to variation of parameters 1.6 × VR, 2 s Top (°C) DC voltage derating Top ≤ 85 VC = VR 85 4  upper limit values < 1500 MΩ (CR ≤ 0.33 μF) < 50 s (CR ≥ 0.33 μF) B32671Z ... B32676Z Power Factor Correction Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/μs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/μs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. These parameters are given for isolated pulses in such a way that the heat generated by one pulse will be completely dissipated before applying the next pulse. For a train of pulses, please refer to the curves of permissible AC voltage-current versus frequency. dV/dt values Lead spacing VR VRMS V DC V AC 450 220 520 277 630 310 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm dV/dt in V/μs   400 160 200 250 100 120 160 75 85 100 54 60 73 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm k0 in V2/μs   504 000 128 000 208 000 504 000 80 000 125 000 202 000 67 000 88 000 126 000 48 000 62 000 92 000 k0 values Lead spacing VR VRMS V DC V AC 450 220 520 277 630 310 Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 46 B32671Z ... B32676Z Power Factor Correction Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 46 B32671Z Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤90 °C) For TA >90 °C, please use the derating factor FT. Lead spacing 10 mm 630 V DC/310 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 46 B32672Z Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤90 °C) For TA >90 °C, please use the derating factor FT. Lead spacing 15 mm 450 V DC/220 V AC 520 V DC/277 V AC 630 V DC/310 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 46 B32673Z Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤90 °C) For TA >90 °C, please use the derating factor FT. Lead spacing 22.5 mm 450 V DC/220 V AC 520 V DC/277 V AC 630 V DC/310 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 46 B32674Z Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤90 °C) For TA >90 °C, please use the derating factor FT. Lead spacing 27.5 mm 450 V DC/220 V AC 520 V DC/277 V AC 630 V DC/310 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 46 B32676Z Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤90 °C) For TA >90 °C, please use the derating factor FT. Lead spacing 37.5 mm 450 V DC/220 V AC 520 V DC/277 V AC 630 V DC/310 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 46 B32671Z Power Factor Correction Permissible current IRMS versus frequency f (for sinusoidal waveforms Top ≤90 °C) For TA >90 °C, please use the derating factor FT. Lead spacing 10 mm 450 V DC/160 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 46 B32672Z Power Factor Correction Permissible current IRMS versus frequency f (for sinusoidal waveforms Top ≤90 °C) For TA >90 °C, please use the derating factor FT. Lead spacing 15 mm 450 V DC/160 V AC 520 V DC/200 V AC 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 46 B32673Z Power Factor Correction Permissible current IRMS versus frequency f (for sinusoidal waveforms Top ≤90 °C) For TA >90 °C, please use the derating factor FT. Lead spacing 22.5 mm 450 V DC/160 V AC 520 V DC/200 V AC 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 46 B32674Z Power Factor Correction Permissible current IRMS versus frequency f (for sinusoidal waveforms Top ≤90 °C) For TA >90 °C, please use the derating factor FT. Lead spacing 27.5 mm 450 V DC/160 V AC 520 V DC/200 V AC 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 22 of 46 B32676Z Power Factor Correction Permissible current IRMS versus frequency f (for sinusoidal waveforms Top ≤90 °C) For TA >90 °C, please use the derating factor FT. Lead spacing 37.5 mm 450 V DC/160 V AC 520 V DC/200 V AC 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 46 B32671Z ... B32676Z Power Factor Correction Maximum AC Voltage (VRMS), Current (IRMS) versus frequency and temperature for TA >90 °C The graphs described in the previous section for the permissible AC voltage (VRMS) or current (IRMS) versus frequency are given for a maximum ambient temperature TA ≤90 °C. In case of higher ambient temperatures (TA), the self-heating (ΔT) of the component must be reduced to avoid that temperature of the component (Top= TA + ΔT) reaches values above maximum operating temperature. The factor FT shall be applied in the following way: FT is given by the following curve Maximum IRMS current as function of the ambient temperature: IRMS (TA) = Factor × IRMS (70 °C) Please read Cautions and warnings and Important notes at the end of this document. Page 24 of 46 B32671Z ... B32676Z Power Factor Correction Taping and packing 1 Capacitors with radial leads Taping to IEC 60286-2:2015. 1.1 Tape dimensions Lead spacing 5 mm Types: B32529, B32559 (MKT) Dimensions Symbol ∅d1 Dimension (mm) 0.5 Tolerance (mm) ±0.05 Symbol W Dimension (mm) 18.0 Tolerance (mm) ±0.5 *) D0 4.0 ±0.2 W0 6.0 ±0.5 F F' 5.0 5.0 +0.6/0.1 ±0.4 W1 9.0 ±0.5 W2 0.5 +2.5 ±1 per 20 × P0 Please read Cautions and warnings and Important notes at the end of this document. Page 25 of 46 H 18.5 ±0.5 H1 32.2 max. t 0.7 ±0.2 P0 12.7 ±0.2*) Δh 0 ±2.0 P1 3.8 ±0.7 Δp 0 ±1.3 B32671Z ... B32676Z Power Factor Correction Lead spacing 7.5 mm Types: B32520, B32560 (MKT) B32620 (MKP) Dimensions Symbol ∅d1 Dimension (mm) 0.5 Tolerance (mm) ±0.05 Symbol W Dimension (mm) 18.0 Tolerance (mm) ±0.5 *) D0 4.0 ±0.2 W0 6.0 ±0.5 F F' 7.5 7.5 +0.6/0.1 ±0.4 W1 9.0 ±0.5 W2 0.5 +2.5 ±1 per 20 × P0 Please read Cautions and warnings and Important notes at the end of this document. Page 26 of 46 H 18.5 ±0.5 H1 32.2 max. t 0.7 ±0.2 P0 12.7 ±0.2*) Δh 0 ±2.0 P1 3.8 ±0.7 Δp 0 ±1.3 B32671Z ... B32676Z Power Factor Correction Lead spacing 10 mm Types: B32521, B32561 (MKT) B32621, B32641, B32651, B32671 (MKP) B32021, B32911, B32921 (EMI suppression) Standard 10 mm P0 = 12.7 mm Dimensions Symbol Dimension (mm) Tolerance (mm) ∅d1 0.5; 0.6 ±0.05 Symbol P0 Dimension (mm) 12.7 Tolerance (mm) ±0.2*) *) P1 7.7 ±0.7 D0 4.0 ±0.2 W 18.0 ±0.5 F 10.0 +0.6/0.1 W0 12.0 ±0.5 W1 9.0 ±0.5 ±1 per 20 × P0 Please read Cautions and warnings and Important notes at the end of this document. Page 27 of 46 F' 10.0 ±0.4 W2 0.5 +2.5 H 18.5 ±0.5 t 0.7 ±0.2 H1 32.2 max. Δh 0 ±2.0 Δp 0 ±1.3 B32671Z ... B32676Z Power Factor Correction Lead spacing 15 mm Types: B32522, B32562 (MKT) B32642, B32652, B32672 (MKP) B32682 (MFP) B32022, B32912, B32922, B32932, B81123 (EMI suppression) Standard 15 mm P0 = 12.7 mm Dimensions Symbol Dimension (mm) Tolerance (mm) ∅d1 0.6; 0.8 ±0.05 Symbol P0 Dimension (mm) 12.7 Tolerance (mm) ±0.2*) *) P1 5.2 ±0.7 D0 4.0 ±0.2 W 18.0 ±0.5 F 15.0 +0.6/0.1 W0 12.0 ±0.5 W1 9.0 ±0.5 ±1 per 20 × P0 Please read Cautions and warnings and Important notes at the end of this document. Page 28 of 46 F' 15.0 ±0.4 W2 0.5 +2.5 H 18.5 ±0.5 t 0.7 ±0.2 H1 37.5 max. Δh 0 ±2.0 Δp 0 ±1.3 B32671Z ... B32676Z Power Factor Correction Lead spacing 22.5 mm Types: B32523, B32593 (MKT) B32613, B32643, B32653, B32673 (MKP) B32683 (MFP) B32023, B32033, B32913, B32923, B32933, B81123 (EMI suppression) Standard 22.5 mm P0 = 12.7 mm Dimensions Symbol Dimension (mm) Tolerance (mm) ∅d1 0.8 ±0.05 Symbol P0 Dimension (mm) 12.7 Tolerance (mm) ±0.2*) *) P1 7.8 ±0.7 D0 4.0 ±0.2 W 18.0 ±0.5 F 22.5 +0.6/0.1 W0 12.0 ±0.5 W1 9.0 ±0.5 ±1 per 20 × P0 Please read Cautions and warnings and Important notes at the end of this document. Page 29 of 46 F' 22.5 ±0.4 W2 0.5 +2.5 H 18.5 ±0.5 t 0.7 ±0.2 H1 39.5 max. Δh 0 ±2.0 Δp 0 ±1.3 B32671Z ... B32676Z Power Factor Correction Lead spacing 27.5 mm Types: B32524 (MKT) B32654, B32674, B32774 (MKP) B32684 (MFP) B32024, B32034, B32914, B32924, B32934 (EMI suppression) Dimensions Symbol ∅d1 Dimension (mm) 0.8 Tolerance (mm) ±0.05 Symbol P0 Dimension (mm) 12.7 Tolerance (mm) ±0.2*) *) D0 4.0 ±0.2 P1 5.3 ±0.7 F 27.5 +0.6/0.1 W 18.0 ±0.5 W0 12.0 ±0.5 F' 27.5 ±0.4 W1 9.0 ±0.5 ±1 per 20 × P0 Please read Cautions and warnings and Important notes at the end of this document. Page 30 of 46 H 18.5 ±0.5 W2 0.5 +2.5 t 0.7 ±0.2 H1 42.0 max. Δh 0 ±2.0 Δp 0 ±1.3 B32671Z ... B32676Z Power Factor Correction 1.2 Crimping Lead spacing 10 mm crimped down to 7.5 mm P0 = 15.0 mm, ending code 140 for Reel, ending code 240 for Ammo pack Standard 10 mm P0 = 15 mm Symbol Dimension (mm) Tolerance (mm) ∅d1 0.5; 0.6 ±0.05 Symbol W Dimension (mm) 18.0 Tolerance (mm) ±0.5 D0 4.0 ±0.2 W0 12.0 ±0.5 F 7.5 +0.6/0.1 W1 9.0 ±0.5 H 18.5 ±0.5 W2 0.5 +2.5 ±1 per 20 × P0 Packing unit and MOQ upon request. *) Please read Cautions and warnings and Important notes at the end of this document. Page 31 of 46 H0 17.0 ±0.5 P0 15.0 ±0.2*) P1 3.75 ±0.7 t 0.7 ±0.2 Δh 0 ±2.0 Δp 0 ±1.3 B32671Z ... B32676Z Power Factor Correction Lead spacing 15 mm crimped down to 7.5 mm P0 = 15.0 mm, ending code 155 for Reel, ending code 255 for Ammo pack Standard 15 mm P0 = 15 mm Symbol Dimension (mm) Tolerance (mm) ∅d1 0.6; 0.8 ±0.05 Symbol W Dimension (mm) 18.0 Tolerance (mm) ±0.5 D0 4.0 ±0.2 W0 12.0 ±0.5 F 7.5 +0.6/0.1 W1 9.0 ±0.5 H 18.5 ±0.5 W2 0.5 +2.5 ±1 per 20 × P0 Packing unit and MOQ upon request. *) Please read Cautions and warnings and Important notes at the end of this document. Page 32 of 46 H0 17.0 ±0.5 P0 15.0 ±0.2*) P1 3.75 ±0.7 t 0.7 ±0.2 Δh 0 ±2.0 Δp 0 ±1.3 B32671Z ... B32676Z Power Factor Correction 1.3 Packing Reel packing Dimensions (mm) Lead spacing ≤7.5 Lead spacing 10, 15, 22.5, 27.5 On request: Lead spacing ≥10 n 42 +1 54 +1 w 52 max. 70 max. ∅d 360 1 500 1 ∅e 90 130 ∅f 30.5 ±0.2 30.5 ±0.2 ∅h 82 +1 126 +1 54 +1 70 max. 360 1 90 30.5 ±0.7 82 +1 Ammo packing Dimensions (approximately) a (mm) b (mm) c (mm) Please read Cautions and warnings and Important notes at the end of this document. Lead spacing (mm) 5 7.5 15 15 355 350 50 355 350 60 Page 33 of 46 15 22.5 480 355 50 15 22.5 480 355 60 B32671Z ... B32676Z Power Factor Correction 2 General notes on packing When packing our products, we pay attention to the needs of the environment by reducing the amount of packing to an absolute minimum and using environmentally compatible materials for packing. In doing so we are also complying with the German packaging legislation which came into force on the 1st December 1991. In order to further comply with the aims of this legislation concerning the reduction of commercial waste, we have implemented the following measures:  The use of "Euro" pallets.  Goods are secured on the pallets using straps and edge protectors made of environmentally compatible plastics (PE or PP).  The shipping cartons (transport packing) qualify for and carry the RESY logo.  Separating layers are of paper.  The shipping cartons are sealed with paper adhesive tape in order to ensure that only a single, uniform material needs to be disposed of.  We are prepared, on principle, to take back the packing material (especially product-specific plastic packages, e.g. magazines). However, we ask our customers to send cardboard cartons, corrugated cardboard, paper etc. to recycling or disposal companies in order to avoid unnecessary transportation of empty packing materials. Please read Cautions and warnings and Important notes at the end of this document. Page 34 of 46 B32671Z ... B32676Z Power Factor Correction Testing and Standards Test Reference Electrical parameters IEC 60384-1:2016 Voltage proof, 1.6 VR, 1 minute Insulation resistance, Rins Capacitance, C Dissipation factor, tan δ IEC Tensile strength (test Ua1) 60068-2-21:2006 Wire diameter Tensile force 0.5 < d1 < 0.8 mm 10 N Robustness of terminations Conditions of test Performance requirements Within specified limits Capacitance and tan δ within specified limits Solder bath temperature at 260 ± 5 °C, ΔC/C0 ≤ 2% Resistance to IEC 60068-2-20:2008, immersion for 10 seconds soldering Δ tan δ ≤ 0.002 test Tb, heat method 1A Rapid change of temperature IEC 60384-16:2005 TA = lower category temperature TB = upper category temperature Five cycles, duration t = 30 min. Vibration IEC 60384-16:2005 Test FC: vibration sinusoidal Displacement: 0.75 mm Accleration: 98 m/s2 Frequency: 10 Hz ... 500 Hz Test duration: 3 orthogonal axes, 2 hours each axe No visible damage Bump IEC 60384-16:2005 Test Eb: Total 4000 bumps with 390 m/s2 mounted on PCB No visible damage ΔC/C0 ≤ 2% Δ tan δ I ≤ 0.002 Rins ≥ 50% of initial limit No visible damage ΔC/C0 ≤ 3% Δ tan δ ≤ 0.001 Rins ≥ 50% of initial limit Duration: 6 ms Climatic sequence IEC 60384-16:2005 Damp heat, steady state IEC 60384-16:2005 High temperature high humidity with load Please read Cautions and warnings and Important notes at the end of this document. Dry heat Tb / 16 h Damp heat cyclic, 1st cycle +55 °C / 24 h / 95% ... 100% RH Cold Ta / 2 h Damp heat cyclic, 5 cycles +55 °C / 24 h / 95% ... 100% RH Test Ca 40 °C / 93% RH / 56 days 60 °C / 95% RH / 1000 hours with VR,DC Page 35 of 46 No visible damage ΔC/C0 ≤ 3% Δ tan δ ≤ 0.001 Rins ≥ 50% of initial limit No visible damage ΔC/C0 ≤ 10% Δ tan δ ≤ 0.004 Rins ≥ 50% of initial limit B32671Z ... B32676Z Power Factor Correction Test Reference Conditions of test Endurance IEC 60384-16:2005 85 °C / 1.25 VR / 2000 hours Endurance IEC 60384-16:2005 110 °C / 1.25 VC / 2000 hours Performance requirements No visible damage ΔC/C0 ≤ 5% Δ tan δ ≤ 0.004 Rins ≥ 50% of initial limit No visible damage ΔC/C0 ≤ 10% Δ tan δ ≤ 0.004 Rins ≥ 50% of initial limit Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Please read Cautions and warnings and Important notes at the end of this document. Wetting of wire surface by new solder ≥90%, free-flowing solder Page 36 of 46 B32671Z ... B32676Z Power Factor Correction 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing >10 mm) MFP MKP (lead spacing >7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤7.5 mm) MKT uncoated (lead spacing ≤10 mm) insulated (B32559) 10 ±1 s 5 ±1 s