B32673Z

Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: B32671Z ... B32673Z March 2010 © EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polypropylene film capacitors (MKP) Power Factor Correction B32671Z ... B32673Z Typical applications PFC (Power Factor Correction) Not suitable for "across the line" applications Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1): 55/110/56 Construction Dielectric: metallized polypropylene (PP) Wound capacitor technology Plastic case (UL 94 V-0) Epoxy resin sealing, flame retardant Features High frequency capability Very small dimensions Terminals Parallel wire leads, lead-free tinned Lead diameter ∅ d1 = 0.8 mm Lead length 6 1 mm Marking Manufacturer's logo, rated capacitance (coded), tolerance, rated DC voltage, type number Dimensional drawing Dimensions in mm Lead spacing ±0.4 10 15 22.5 Lead diameter d1 0.6 0.8 0.8 Type B32671Z B32672Z B32673Z Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 22 B32671Z ... B32673Z Power Factor Correction Overview of available types Lead spacing 10 mm Type Page VRMS (V AC) VR (V DC) CR (µF) 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.12 0.15 0.22 0.33 0.47 0.56 0.68 1.0 1.2 1.5 2.2 B32671Z 4 310 630 15 mm B32672Z 5 220 450 277 520 310 630 22.5 mm B32673Z 6 220 450 277 520 310 630 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 22 B32671Z Power Factor Correction Ordering codes and packing units (lead spacing 10 mm) VRMS VR CR f ≤1 kHz V AC V DC µF 310 630 0.010 0.015 0.022 0.033 0.047 0.068 0.10 Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 Ordering code (composition see below) B32671Z6103+*** B32671Z6153+*** B32671Z6223+*** B32671Z6333+*** B32671Z6473+*** B32671Z6683+*** B32671Z6104+*** Ammo pack pcs./MOQ 4000 4000 4000 3320 3320 2720 2720 Reel pcs./MOQ 6800 6800 6800 5200 5200 4400 4400 Untaped pcs./MOQ 4000 4000 4000 4000 4000 4000 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 22 B32672Z Power Factor Correction Ordering codes and packing units (lead spacing 15 mm) VRMS VR CR f ≤1 kHz V AC V DC µF 220 450 0.10 0.15 0.22 0.33 0.47 0.47 0.68 0.68 1.0 277 520 0.047 0.10 0.15 0.22 0.33 0.33 0.47 0.47 0.68 1.0 310 630 0.033 0.047 0.068 0.10 0.12 0.15 0.22 0.33 0.33 0.33 0.47 0.56 Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 13.0 × 14.0 × 18.0 9.0 × 17.5 × 18.0 13.0 × 14.0 × 18.0 11.0 × 18.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 13.0 × 14.0 × 18.0 9.0 × 17.5 × 18.0 13.0 × 14.0 × 18.0 11.0 × 18.5 × 18.0 11.0 × 18.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 6.0 × 11.0 × 18.0 6.0 × 12.0 × 18.0 8.0 × 14.0 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 13.0 × 14.0 × 18.0 11.0 × 18.5 × 18.0 11.0 × 18.5 × 18.0 Ordering code (composition see below) B32672Z4104+*** B32672Z4154+*** B32672Z4224+*** B32672Z4334+*** B32672Z4474+*** B32672T4474K*** B32672Z4684+*** B32672T4684K*** B32672Z4105K*** B32672Z5473+*** B32672Z5104+*** B32672Z5154+*** B32672Z5224+*** B32672Z5334+*** B32672T5334K*** B32672Z5474+*** B32672T5474K*** B32672Z5684+*** B32672Z5105K*** B32672Z6333+*** B32672Z6473+*** B32672Z6683+*** B32672Z6104+*** B32672Z6124+*** B32672Z6154+*** B32672T6224+*** B32672Y6334K*** B32672Z6334+*** B32672T6334+*** B32672Z6474+*** B32672Z6564+*** Ammo pack pcs./MOQ 4680 4680 3840 3320 2920 2560 Reel pcs./MOQ 5200 5200 4400 3600 3000 2000 2800 2000 2200 5200 4400 4400 3600 2800 2000 2800 2000 2000 2200 5200 5200 5200 4400 4400 4400 3000 2800 2800 2000 2200 2200 Untaped pcs./MOQ 4000 4000 4000 4000 2000 1200 2000 1200 1200 4000 4000 4000 4000 2000 1200 2000 1200 1200 1200 4000 4000 4000 4000 4000 4000 2000 2000 2000 1200 1200 1200 4680 3840 3840 3320 2720 2560 4680 4680 4680 3840 3840 3840 2920 2720 2560 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 22 B32673Z Power Factor Correction Ordering codes and packing units (lead spacing 22.5 mm) VRMS VR CR f ≤1 kHz V AC V DC µF 220 450 0.22 0.22 0.33 0.33 0.47 0.47 0.68 0.68 1.0 1.5 2.2 277 520 0.22 0.22 0.33 0.33 0.47 0.47 0.68 1.0 1.5 310 630 0.15 0.22 0.33 0.33 0.47 0.68 1.0 1.2 1.5 2.2 Max. dimensions w×h×l mm 6.0 × 15.0 × 26.5 7.5 × 14.0 × 26.5 6.0 × 15.0 × 26.5 7.5 × 14.0 × 26.5 6.0 × 15.0 × 26.5 7.5 × 14.0 × 26.5 7.0 × 16.0 × 26.5 7.5 × 14.0 × 26.5 10.5 × 16.5 × 26.5 11.0 × 20.5 × 26.5 12.0 × 22.0 × 26.5 6.0 × 15.0 × 26.5 7.5 × 14.0 × 26.5 6.0 × 15.0 × 26.5 7.5 × 14.0 × 26.5 7.0 × 16.0 × 26.5 7.5 × 14.0 × 26.5 10.5 × 16.5 × 26.5 10.5 × 20.5 × 26.5 12.0 × 22.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 7.5 × 14.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 18.5 × 26.5 11.0 × 20.5 × 26.5 12.0 × 22.0 × 26.5 14.5 × 29.5 × 26.5 14.5 × 29.5 × 26.5 Ordering code (composition see below) B32673Z4224+*** B32673T4224K*** B32673Z4334+*** B32673T4334K*** B32673Z4474+*** B32673T4474K*** B32673Z4684+*** B32673T4684K*** B32673Z4105+*** B32673Z4155+*** B32673Z4225+*** B32673Z5224+*** B32673T5224K*** B32673Z5334+*** B32673T5334K*** B32673Z5474+*** B32673T5474K*** B32673Z5684+*** B32673Z5105+*** B32673Z5155+*** B32673Z6154+*** B32673Z6224+*** B32673Z6334+*** B32673T6334+*** B32673Z6474+*** B32673Z6684+*** B32673Z6105+*** B32673Z6125+*** B32673Z6155+*** B32673Z6225+*** Ammo pack pcs./MOQ 2720 2200 2720 2200 2720 2200 2320 2200 1560 1480 2720 2200 2720 2200 2320 2200 1560 Reel pcs./MOQ 2800 2000 2800 2000 2800 2000 2400 2000 1600 1400 2800 2000 2800 2000 2400 2000 1600 Untaped pcs./MOQ 2880 2280 2880 2280 2880 2280 2520 2280 2160 2040 1800 2880 2280 2880 2280 2520 2280 2160 2160 1800 2880 2880 2520 2280 2040 2160 2040 1800 2160 2160 2720 2720 2820 2200 1920 1560 1480 2800 2800 2400 2000 2000 1600 1400 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 22 B32671Z ... B32673Z Power Factor Correction Technical data Max. operating temperature +125 °C Top,max Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) at 1 kHz 100 kHz Insulation resistance Rins > 30 000 MΩ or time constant τ = CR Rins > 10 000 s at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) Total self-inductance L (lead length 3mm) DC test voltage Category voltage VC (continuous operation with VDC or VAC at f ≤ 1 kHz) Operating voltage Vop for short operating periods (VDC or VAC at f ≤ 1 kHz) Passive flammability category in accordance to IEC 40 (CO) 752 LS 15 mm LS 22.5 mm 1.6 × VR, 2 s TA (°C) TA ≤ 85 85 10% > 4 upper limit values < 1500 MΩ Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing VR VRMS V DC V AC 450 220 520 277 630 310 k0 values Lead spacing VR VRMS V DC V AC 450 220 520 277 630 310 10 mm k0 in V2/µs 128 000 208 000 504 000 80 000 125 000 202 000 15 mm 22.5 mm 10 mm dV/dt in V/µs 160 200 250 100 120 160 15 mm 22.5 mm 400 504 000 Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 22 B32671Z Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤ 90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 630 V DC/310 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 22 B32672Z Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤ 100 °C) For TA >100 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 450 V DC/220 V AC 520 V DC/277 V AC 630 V DC/310 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 22 B32673Z Power Factor Correction Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤ 100 °C) For TA >100 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 450 V DC/220 V AC 520 V DC/277 V AC 630 V DC/310 V AC Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 22 B32671Z ... B32673Z Power Factor Correction Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s