B32794D3126

Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: B32794 ... B32798 February 2010 © EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polypropylene film capacitors (MKP) MKP AC filtering Preliminary Data Typical applications Output AC filtering for power converters UPS, solar inverters, motor drives Climatic Max. operating temperature: 105 °C Climatic category (IEC 60068-1): 40/85/56 Construction Dielectric: Polypropylene (PP) Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) Features Optimized AC voltage performance High ripple current/frequency capability Small dimensions For PCB mounting Terminals Parallel wire leads, lead-free tinned 2-pin and 4-pin versions Standard lead lengths: 6 1 mm Special lead lengths available on request Marking Manufacturer's logo, date code, rated capacitance (coded), capacitance tolerance (code letter), rated AC voltage Delivery mode Bulk (untaped, lead length 6 4-pin version Dimensional drawings 2-pin version B32794 ... B32798 Dimensions in mm Version Lead spacing ±0.4 27.5 37.5 37.5 52.5 Lead diameter d1 0.8 1.0 1.2 1.2 Type 1 mm) 2-pin 2-pin 4-pin 4-pin B32794D B32796E B32796G B32798G Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 19 B32794 ... B32798 MKP AC filtering Preliminary Data Overview of available types Lead spacing 27.5 mm Type Page VRMS (V AC) CR (µF) 0.82 1.2 1.5 2.0 2.2 2.5 3.3 3.5 4.0 5.0 6.3 7.5 8.0 10 12 13 14 15 16 18 20 22 24 25 26 30 34 35 40 45 55 75 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 19 37.5 mm B32796 5 350 400 250 300 350 400 52.5 mm B32798 6 250 300 350 400 B32794 4 250 300 B32794 MKP AC filtering Preliminary Data Ordering codes and packing units (lead spacing 27.5 mm) VRMS VR CR Max. dimensions w×h×l mm 11.0 × 19.0 × 31.5 11.0 × 21.0 × 31.5 15.0 × 24.5 × 31.5 16.0 × 32.0 × 31.5 22.0 × 36.5 × 31.5 11.0 × 19.0 × 31.5 13.5 × 23.0 × 31.5 14.0 × 24.5 × 31.5 18.0 × 33.0 × 31.5 22.0 × 36.5 × 31.5 11.0 × 19.0 × 31.5 12.5 × 21.5 × 31.5 15.0 × 24.5 × 31.5 18.0 × 33.0 × 31.5 22.0 × 36.5 × 31.5 11.0 × 19.0 × 31.5 13.5 × 23.0 × 31.5 14.0 × 24.5 × 31.5 18.0 × 33.0 × 31.5 22.0 × 36.5 × 31.5 P1 Ordering code (composition see below) B32794D2255+000 B32794D2405+000 B32794D2635+000 B32794D2106+000 B32794D2156+000 B32794D3205+000 B32794D3335+000 B32794D3505+000 B32794D3805+000 B32794D3126+000 B32794D8125+000 B32794D8225+000 B32794D8335+000 B32794D8505+000 B32794D8755+000 B32794D4824+000 B32794D4155+000 B32794D4225+000 B32794D4355+000 B32794D4505+000 IRMS ESL ESR Untaped 60 °C 10 kHz 10 kHz pcs./ A nH mΩ MOQ 4 24 14.1 2352 6 25 9.1 2352 8 26 6.1 1680 11 27 4.2 1064 13 28 3.1 784 4 24 15.6 2352 6 25 9.7 1932 7 26 6.7 1848 9 27 4.6 952 11 28 3.5 784 3 24 21.2 2352 5 25 11.9 2100 7 26 8.2 1680 9 27 5.8 952 12 28 4.5 784 3 24 26.5 2352 4 25 14.8 1932 6 26 10.4 1848 8 27 6.9 952 11 28 5.5 784 V AC V DC µF 250 2.5 4.0 6.3 10 15 700 2.0 3.3 5.0 8.0 12 875 1.2 2.2 3.3 5.0 7.5 1050 0.82 1.5 2.2 3.5 5.0 630 mm 300 350 400 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 19 B32796 MKP AC filtering Preliminary Data Ordering codes and packing units (lead spacing 37.5 mm) VRMS VR CR Max. dimensions w×h×l mm 20.0 × 39.5 × 42.0 20.0 × 39.5 × 42.0 28.0 × 37.0 × 42.0 28.0 × 37.0 × 42.0 30.0 × 45.0 × 42.0 30.0 × 45.0 × 42.0 33.0 × 48.0 × 42.5 20.0 × 39.5 × 42.0 20.0 × 39.5 × 42.0 28.0 × 37.0 × 42.0 28.0 × 37.0 × 42.0 30.0 × 45.0 × 42.0 30.0 × 45.0 × 42.0 33.0 × 48.0 × 42.5 20.0 × 39.5 × 42.0 20.0 × 39.5 × 42.0 28.0 × 37.0 × 42.0 28.0 × 37.0 × 42.0 30.0 × 45.0 × 42.0 30.0 × 45.0 × 42.0 30.0 × 45.0 × 42.0 33.0 × 48.0 × 42.5 20.0 × 39.5 × 42.0 20.0 × 39.5 × 42.0 28.0 × 37.0 × 42.0 28.0 × 37.0 × 42.0 30.0 × 45.0 × 42.0 30.0 × 45.0 × 42.0 33.0 × 48.0 × 42.5 P1 Ordering code (composition see below) IRMS ESL ESR Untaped 60 °C 10 kHz 10 kHz pcs./ A nH mΩ MOQ 15 30 3.2 640 14 30 3.2 640 17 30 2.9 440 16 30 2.9 440 21 33 2.3 400 20 33 2.3 400 23 33 1.9 192 14 30 3.9 640 13 30 3.9 640 15 30 3.1 440 14 30 3.1 440 19 33 2.2 400 18 33 2.2 400 20 33 1.9 192 12 30 4.9 640 11 30 4.9 640 15 30 3.6 440 14 30 3.6 440 15 30 3.0 400 19 30 2.6 400 18 30 2.6 400 20 30 2.5 192 11 30 5.5 640 10 30 5.5 640 14 30 4.5 440 13 30 4.5 440 17 33 3.5 400 16 33 3.5 400 18 33 3.5 192 V AC V DC µF 250 630 22 22 25 25 40 40 45 700 16 16 20 20 30 30 34 875 10 10 14 14 15 20 20 24 1050 7.5 7.5 10 10 13 13 16 mm 10.2 B32796G2226+000 B32796E2226+000 10.2 B32796G2256+000 B32796E2256+000 20.3 B32796G2406+000 B32796E2406+000 20.3 B32796G2456+000 10.2 B32796G3166+000 B32796E3166+000 10.2 B32796G3206+000 B32796E3206+000 20.3 B32796G3306+000 B32796E3306+000 20.3 B32796E3346+000 10.2 B32796G8106+000 B32796E8106+000 10.2 B32796G8146+000 B32796E8146+000 20.3 B32796G8156+000 20.3 B32796G8206+000 B32796E8206+000 20.3 B32796G8246+000 10.2 B32796G4755+000 B32796E4755+000 10.2 B32796G4106+000 B32796E4106+000 20.3 B32796G4136+000 B32796E4136+000 20.3 B32796G4166+000 300 350 400 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 19 B32798 MKP AC filtering Preliminary Data Ordering codes and packing units (lead spacing 52.5 mm) VRMS VR CR Max. dimensions w×h×l mm 30.0 × 45.0 × 57.5 35.0 × 50.0 × 57.5 30.0 × 45.0 × 57.5 35.0 × 50.0 × 57.5 30.0 × 45.0 × 57.5 35.0 × 50.0 × 57.5 35.0 × 50.0 × 57.5 35.0 × 50.0 × 57.5 30.0 × 45.0 × 57.5 35.0 × 50.0 × 57.5 35.0 × 50.0 × 57.5 P1 Ordering code (composition see below) B32798G2556+000 B32798G2756+000 B32798G3406+000 B32798G3556+000 B32798G8266+000 B32798G8306+000 B32798G8356+000 B32798G8406K000 B32798G4186+000 B32798G4206+000 B32798G4256+000 IRMS ESL ESR Untaped 60 °C 10 kHz 10 kHz pcs./ A nH mΩ MOQ 21 35 2.7 280 25 38 2.1 108 19 35 3.2 280 24 38 2.5 108 18 35 4.5 280 20 37 4.0 108 22 38 3.0 108 22 38 3.0 108 16 35 4.7 280 17 37 4.5 108 20 38 3.5 108 V AC V DC µF 250 300 350 630 55 75 700 40 55 875 26 30 35 40 1050 18 20 25 mm 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 400 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 19 B32794 ... B32798 MKP AC filtering Preliminary Data Technical data Reference standard: IEC 61071 Operating temperature range (case) Max. operating temperature, Top,max +105 °C Upper category temperature Tmax +85 °C Lower category temperature Tmin –40 °C Note: At T > 85 °C de-rating for VRMS (V AC) should be 1.5%/°C 2% respect the value measured at reference conditions 30 000 s Capacitance drift in range ( 40 °C, 85 °C) Insulation Resistance Rins given as time constant τ = CR Rins, rel. humidity ≤ 65% (minimum as-delivered values) Test voltage between terminals DC test voltage terminal to case (10 s) Maximum permissible overvoltage for short operating periods (max 1 min/day) Maximum peak current (A) Damp heat test Limit values after damp heat test 1.5 VR for 10 s 1.65 VR for 2 s 2 VRMS + 1000 V AC (min. 2000 V AC) at 50 Hz 1.3 VRMS 56 days/40 °C/93% relative humidity Capacitance change | ∆C/C | ≤ 5% Dissipation factor change ∆ tan δ ≤ 1.5 · 10-3 (at 1 kHz) ≥ 50% of minimum Insulation resistance Rins as-delivered values In accordance with IEC 60068-2-14 (Test Nb) 300 fit > 60 000 h at VRMS For conversion to other operating conditions, refer to chapter "Reliability" on page 439 from Data Book 2009. Change of temperature Reliability: Failure rate λ Service life tSL Failure criteria: Total failure Failure due to variation of parameters Short/open circuit Capacitance change | ∆C/C | ≥ 10% Dissipation factor change ∆ tan δ > 4 · upper limit value Insulation resistance Rins < 1500 MΩ (CR≤0.33µF) or time constant τ = CR · Rins < 500 s (CR>0.33µF) Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 19 B32794 ... B32798 MKP AC filtering Preliminary Data Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. Note: The values of dV/dt provided below must not be exceeded in order to avoid damaging the capacitor. Lead spacing Type VRMS (V AC) 250 27 27.5 mm B32794 300 31 350 39 400 47 250 19 37.5 mm B32796 300 21 350 26 400 32 250 12 dV/dt in V/µs 14 18 21 52.5 mm B32798 300 350 400 Notes: Please take all additional data not mentioned above from our Data Book 2009 Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 19 B32794 ... B32798 MKP AC filtering Preliminary Data Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s