B32912A3224

Film Capacitors EMI Suppression Capacitors (MKP) Series/Type: Date: B32911 ... B32916 August 2010 © EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EMI suppression capacitors (MKP) X1 / 330 V AC B32911 ... B32916 Typical applications X1 class for interference suppression "Across the line" applications For apparatus permanently connected to mains and isolated from direct contact with humidity Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1): 40/110/56 Construction Dielectric: polypropylene (MKP) Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) Features Very small dimensions Good self-healing properties High voltage capability Terminals Parallel wire leads, lead-free tinned Standard lead lengths: 6 1 mm Special lead lengths available on request Marking Manufacturer's logo, lot number, date code, rated capacitance (coded), capacitance tolerance (code letter), rated AC voltage (IEC), series number, sub-class (X1), dielectric code (MKP), climatic category, passive flammability category, approvals. Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For taping details, refer to chapter "Taping and packing". Dimensional drawing Dimensions in mm Lead spacing ±0.4 10 15 ... 27.5 37.5 Lead diameter d1 0.6 0.8 1.0 Type B32911 B32912 ... B32914 B32916 Marking examples =10 mm 15 ≤ ≤ 27.5 mm (CR ≤ 1 µF) 22.5 ≤ ≤ 37.5 mm (CR > 1 µF) Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 17 B32911 ... B32916 X1 / 330 V AC Approvals Approval marks Standards EN 60384-14 / IEC 60384-14 (330 V AC) UL1414 (250 V AC) UL1283 (300 V AC) 1) Certificate 40019000 E97863 E157153 E97863 E157153 CSA C22.2 No. 1 (250 V AC) CSA C22.2 No. 8 (300 V AC) 1) approved by UL Overview of available types Lead spacing 10 mm Type CR (µF) 0.010 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 B32911 15 mm B32912 22.5 mm B32913 27.5 mm B32914 37.5 mm B32916 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 17 B32911 ... B32916 X1 / 330 V AC Ordering codes and packing units Lead spacing CR mm 10 µF 0.010 0.022 0.033 0.022 0.033 0.047 0.068 0.10 0.15 0.15 0.22 0.22 0.33 0.15 0.22 0.33 0.47 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 9.0 × 17.5 × 18.0 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 18.5 × 26.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 13.5 × 23.0 × 31.5 18.0 × 27.5 × 31.5 19.0 × 30.0 × 31.5 18.0 × 32.5 × 41.5 20.0 × 39.5 × 41.5 28.0 × 42.5 × 41.5 Ordering code (composition see below) B32911A3103+*** B32911B3223+*** B32911A3333M*** B32912A3223+*** B32912A3333+*** B32912A3473+*** B32912A3683+*** B32912A3104+*** B32912B3154M*** B32912A3154+*** B32912B3224M*** B32912A3224+*** B32912B3334M*** B32913A3154+*** B32913A3224+*** B32913A3334M*** B32913A3474M*** B32914A3474+*** B32914B3684+*** B32914A3105+*** B32914A3155+*** B32914A3225M*** B32916A3335+*** B32916A3475M*** B32916A3685M*** Ammo pack pcs./MOQ 4000 3320 2720 4680 4680 4680 3840 3320 3320 2720 2720 2560 2560 2720 2320 1920 1560 Reel Untaped pcs./MOQ pcs./MOQ 6800 5200 4400 5200 5200 5200 4400 3600 3600 2800 2800 2800 2800 2800 2400 2000 1600 1400 1400 1000 4000 4000 4000 4000 4000 4000 4000 4000 4000 2000 2000 2000 2000 2880 2520 2040 2160 1280 1280 1040 800 720 720 640 440 15 22.5 27.5 37.5 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 17 B32911 ... B32916 X1 / 330 V AC Technical data Rated AC voltage ( IEC 60384-14 ) Maximum continuous DC voltage VDC Max. operating temperature Top,max DC test voltage Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) Insulation resistance Rins or time constant τ = CR Rins at 100 V DC, 20 °C, rel. humidity ≤ 65% and for 60 s (minimum as-delivered values) Passive flammability category to IEC 40 (CO) 752 Capacitance tolerances (measured at 1 kHz) 330 V (50/60 Hz) 760 V +110 °C 2500 V, 2 s CR ≤ 2.2 µF CR > 2.2 µF at 1 kHz 1 2 CR > 0.33 µF 30 000 s CR ≤ 0.33 µF 100 000 MΩ B ±10% (K), ±20% (M) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values Lead spacing dV/dt in V/µs k0 in V2/µs 10 mm 550 473 000 15 mm 400 344 000 22.5 mm 200 172 000 27.5 mm 150 129 000 37.5 mm 100 86 000 Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 17 B32911 ... B32916 X1 / 330 V AC Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s