B32912A5683K000

Film Capacitors EMI Suppression Capacitors (MKP) Series/Type: B32912*5 ... B32918*5 Date: June 2020 © TDK Electronics AG 2020. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. EMI suppression capacitors (MKP) B32912*5 ... B32918*5 X1 / 530 V AC Typical applications X1 class for interference suppression "Across the line" applications Dimensional drawing Drawing 1 Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1:2013): 40/110/56 Construction Dielectric: polypropylene (MKP) Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) Features Small dimensions Good self-healing properties High voltage capability RoHS-compatible Halogen-free capacitors available on request Drawing 2 Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Manufacturer's logo, lot number, date code, rated capacitance (coded), capacitance tolerance (code letter), rated AC voltage (IEC), series number, sub-class (X1), dielectric code (MKP), climatic category, passive flammability category, approvals. Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For taping details, refer to chapter "Taping and packing". P1 = 20.3 mm Dimensions in mm Pin Lead Lead Type spacing diameter ±0.4 d1 ±0.05 2 15 0.8 B32912*5 1 2 22.5 0.8 B32913*5 1 2 27.5 0.8 B32914*5 1 2 / 41) 37.5 1.0 B32916*5 1 / 21) 4 1.2 B32918*5 2 52.5 1) A few individual types only Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 25 Drawing B32912*5 ... B32918*5 X1 / 530 V AC Marking examples (position of marks may vary): Approvals Approval marks Notes: Standards EN 60384-14:2014/A1:2016 IEC 60384-14:2013/AMD1:2016 UL 60384-14:2014, CSA E60384-14:2013 Certificate ENEC-01436 (approved by UL Demko) E97863 Effective January 2014, only for EMI supression capacitors:  UL 60384-14:2014 certification replaces both UL 1414:2000 and UL 1283:2005 standards.  CSA C22.2 No.1.2004 and CSA C22.2 No.8:2013 are replaced by CSA E60384-14:2013.  References like 1414, 1283 are removed from the capacitor marking. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 25 B32912*5 ... B32918*5 X1 / 530 V AC Overview of available types Lead spacing 15 mm 22.5 mm 27.5 mm 37.5 mm 52.5 mm Type B32913*5 B32914*5 B32916*5 B32918*5 B32912*5 CR (μF) 0.0068 0.0082 0.010 0.022 0.033 0.047 0.056 0.068 0.082 0.10 0.15 0.22 0.33 0.47 0.56 0.68 0.82 1.0 1.5 1.8 2.2 3.3 4.7 5.6 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 25 B32912*5 X1 / 530 V AC Ordering codes and packing units (lead spacing 15.0 mm) CR μF 0.0068 0.0082 0.010 0.022 0.033 0.047 0.056 0.068 0.10 Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.5 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 8.0 × 14.0 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 Ordering code Ammo pack (composition see below) pcs./MOQ B32912B5682+*** 4680 B32912B5822+*** 4680 B32912B5103+*** 4680 B32912A5223M*** 4280 B32912B5333+*** 3320 B32912A5473+*** 2920 B32912A5563M*** 2920 B32912A5683+*** 2560 B32912A5104+***  Reel Untaped Pins pcs./MOQ 5200 5200 5200 4800 3600 3000 3000 2800 2200 pcs./MOQ 4000 4000 4000 4000 4000 2000 2000 2000 1200 2 2 2 2 2 2 2 2 2 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 5 of 25 B32913*5 X1 / 530 V AC Ordering codes and packing units (lead spacing 22.5 mm) CR μF 0.033 0.047 0.056 0.068 0.082 0.10 0.10 0.15 0.22 0.33 0.33 0.47 Max. dimensions w×h×l mm 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 7.5 × 14.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 18.5 × 26.5 11.0 × 20.5 × 26.5 12.0 × 22.0 × 26.5 14.5 × 29.5 × 26.5 Ordering code Ammo pack (composition see below) pcs./MOQ B32913A5333+*** 2720 B32913A5473+*** 2720 B32913A5563+*** 2720 B32913A5683+*** 2720 B32913A5823M*** 2720 B32913C5104+*** 2320 B32913B5104+*** 2200 B32913A5154+*** 1920 B32913B5224+*** 1560 B32913A5334M*** 1480 B32913B5334+***  B32913A5474+***  Reel Untaped Pins pcs./MOQ 2800 2800 2800 2800 2800 2400 2000 2000 1600 1400   pcs./MOQ 2880 2880 2880 2880 2880 2520 2280 2040 2160 2040 1800 1040 2 2 2 2 2 2 2 2 2 2 2 2 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 6 of 25 B32914*5 X1 / 530 V AC Ordering codes and packing units (lead spacing 27.5 mm) CR μF 0.15 0.22 0.33 0.47 0.47 0.56 0.56 0.68 0.68 0.68 0.82 0.82 1.0 1.0 1.5 1.8 Max. dimensions w×h×l mm 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 12.5 × 21.5 × 31.5 13.5 × 23.0 × 31.5 13.5 × 23.0 × 31.5 14.0 × 24.5 × 31.5 14.0 × 24.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 27.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 27.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 27.5 × 31.5 22.0 × 36.5 × 31.5 22.0 × 36.5 × 31.5 Ordering code Ammo pack (composition see below) pcs./MOQ B32914A5154+***  B32914A5224+***  B32914A5334M***  B32914A5474M***  B32914B5474+***  B32914A5564M***  B32914B5564+***  B32914A5684M***  B32914C5684+***  B32914B5684+***  B32914B5824+***  B32914A5824+***  B32914B5105+***  B32914A5105M***  B32914A5155+***  B32914A5185M***  Reel Untaped Pins pcs./MOQ 1400 1400 1400 1200 1000 1000 1000 1000         pcs./MOQ 1280 1280 1280 1120 1040 1040 1040 1040 880 800 880 800 880 800 640 640 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 7 of 25 B32916*5 X1 / 530 V AC Ordering codes and packing units (lead spacing 37.5 mm) CR μF 0.22 0.33 0.47 0.56 0.56 0.68 0.68 0.82 0.82 1.0 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 5.6 Max. dimensions w×h×l mm 12.0 × 22.0 × 42.0 12.0 × 22.0 × 42.0 12.0 × 22.0 × 42.0 12.0 × 22.0 × 42.0 24.0 × 15.0 × 42.0 12.0 × 22.0 × 42.0 24.0 × 15.0 × 42.0 14.0 × 25.0 × 42.0 24.0 × 15.0 × 42.0 14.0 × 25.0 × 42.0 16.0 × 28.5 × 42.0 24.0 × 19.0 × 42.0 16.0 × 28.5 × 42.0 17.0 × 32.0 × 42.0 20.0 × 39.5 × 42.0 31.0 × 26.5 × 42.0 28.0 × 37.0 × 42.0 28.0 × 42.5 × 42.0 30.0 × 45.0 × 42.0 33.0 × 48.0 × 42.0 33.0 × 48.0 × 42.0 Ordering code Ammo pack (composition see below) pcs./MOQ B32916A5224+***  B32916A5334+***  B32916A5474+***  B32916A5564+***  B32916B5564+***  B32916A5684+***  B32916B5684+***  B32916A5824M***  B32916B5824+***  B32916A5105M***  B32916C5105+***  B32916D5105+***  B32916A5155M***  B32916B5155+***  B32916A5225+***  B32916B5225+***  B32916A5335M***  B32916B5335+***  B32916A5475M***  B32916B5475+***  B32916A5565M***  Reel Untaped Pins pcs./MOQ                      pcs./MOQ 1620 1620 1620 1620 1040 1620 1040 1380 1040 1380 800 780 800 760 640 600 440 440 400 180 180 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 4 4 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 8 of 25 B32918*5 X1 / 530 V AC Ordering codes and packing units (lead spacing 52.5 mm) CR μF 4.7 5.6 5.6 Max. dimensions w×h×l mm 30.0 × 45.0 × 57.5 30.0 × 45.0 × 57.5 35.0 × 50.0 × 57.5 Ordering code Ammo pack (composition see below) pcs./MOQ B32918A5475+***  B32918A5565+***  B32918B5565+***  Reel Untaped pcs./MOQ    pcs./MOQ 280 4 280 4 108 4 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 9 of 25 Pins B32912*5 ... B32918*5 X1 / 530 V AC Technical data Reference standard: IEC 60384-14:2013/AMD1:2016 / UL 60384-14:2014/A1:2016. All data given at T = 20 °C, unless otherwise specified. Rated AC voltage (IEC 60384-14:2013) 530 V (50/60 Hz) Maximum continuous DC voltage VDC 1000 V at Top ≤ 85 °C 1.5% / °C derating when 85 °C < Top ≤ 110 °C Max. operating temperature Top,max +110 °C DC test voltage 2700 V, 2 s The repetition of this DC voltage test may damage the capacitor. Special care must be taken in case of use several capacitors in a parallel configuration. Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) at 1 kHz Insulation resistance Rins or time constant CR ≤ 0.33 μF τ = CR  Rins at 100 V DC, 20 °C, 30 000 MΩ rel. humidity ≤ 65% and for 60 s (minimum as-delivered values) CR ≤ 2.2 μF CR > 2.2 μF 1 2 CR > 0.33 μF 10 000 s Passive flammability category B Capacitance tolerances (measured at 1 kHz) ±10% (K), ±20% (M) Damp heat test Test conditions Temperature: Relative humidity: Test duration: Voltage value: Capacitance change (ΔC/C) Dissipation factor change (Δtan δ) Insulation resistance Rins or time constant τ = CR  Rins Limit values after damp heat test Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 25 +40 °C ±2 °C 93% ±2% 500 hours 440 V AC, 50 Hz ≤ 10% ≤ 5  10-3 (at 1 kHz) ≥ 200 MΩ B32912*5 ... B32918*5 X1 / 530 V AC Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/μs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/μs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values Lead spacing dV/dt in V/μs k0 in V2/μs 15 mm 400 344 000 22.5 mm 200 172 000 27.5 mm 150 129 000 Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 25 37.5 mm 100 86 000 52.5 mm 40 34 400 B32912*5 ... B32918*5 X1 / 530 V AC Testing and Standards Test Reference Conditions of test Performance requirements Electrical IEC parameters 60384-14:2013/ AMD1:2016 Voltage Proof: Between terminals, 4.3 VR, 1 min. Terminals and enclosure: 2 VR + 1500 V AC Insulation resistance, Rins Capacitance, C Dissipation factor, tan δ Within specified limits Robustness IEC of termina- 60068-2-21:2006 tions Tensile strength (test Ua1) Tensile Wire diameter force Capacitance and tan δ within specified limits 0.5 < d1 ≤ 0.8 mm 0.8 < d1 ≤ 1.25 mm 10 N 20 N Resistance IEC Solder bath temperature at to soldering 60068-2-20:2008, 260 ±5 °C, immersion for heat test Tb, 10 seconds method 1A ΔC/C0 ≤ 5% tan δ within specified limits Rapid IEC change of 60384-14:2013/ temperature AMD1:2016 TA = lower category temperature No visible damage TB = upper category temperature ΔC/C0 ≤ 5% Five cycles, duration t = 30 min. tan δ within specified limits Vibration IEC 60384-14:2013/ AMD1:2016 Test FC: vibration sinusoidal No visible damage Displacement: 0.75 mm Accleration: 98 m/s2 Frequency: 10 Hz ... 500 Hz Test duration: 3 orthogonal axes, 2 hours each axe Bump IEC 60384-14:2013/ AMD1:2016 Test Eb: Total 4000 bumps with No visible damage 400 m/s2 mounted on PCB ΔC/C0 ≤ 5% 6 ms duration tan δ within specified limits Climatic sequence IEC 60384-14:2013/ AMD1:2016 Dry heat Tb / 16 h Damp heat cyclic, 1st cycle +55 °C / 24 h / 95% ... 100% RH Cold Ta / 2 h Damp heat cyclic, 5 cycles +55 °C / 24 h / 95% ... 100% RH Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 25 No visible damage ΔC/C0 ≤ 5% Δ tan δ ≤ 0.008 for C ≤ 1 μF Δ tan δ ≤ 0.005 for C > 1 μF Voltage proof Rins ≥ 50% of initial limit B32912*5 ... B32918*5 X1 / 530 V AC Test Reference Conditions of test Performance requirements Damp heat, IEC steady 60384-14:2013/ state AMD1:2016 Test Ca 40 °C / 93% RH / 56 days No visible damage ΔC/C0 ≤ 5% Δ tan δ ≤ 0.008 for C ≤ 1 μF Δ tan δ ≤ 0.005 for C > 1 μF Voltage proof Rins ≥ 50% of initial limit Impulse test Endurance 3 impulses Tb / 1.25 VR / 1000 hours, 1000 VRMS for 0.1 s every hour No visible damage ΔC/C0 ≤ 10% Δ tan δ ≤ 0.008 for C ≤ 1 μF Δ tan δ ≤ 0.005 for C > 1 μF Voltage proof Rins ≥ 50% of initial limit Passive IEC flammability 60384-14:2013/ AMD1:2016 Flame applied for a period of time depending on capacitor volume B Active IEC flammability 60384-14:2013/ AMD1:2016 20 discharges at 4.0 kV + VR The cheesecloth shall not burn with a flame IEC 60384-14:2013/ AMD1:2016 Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Please read Cautions and warnings and Important notes at the end of this document. Wetting of wire surface by new solder ≥90%, free-flowing solder Page 13 of 25 B32912*5 ... B32918*5 X1 / 530 V AC 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing >10 mm) MFP MKP (lead spacing >7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤7.5 mm) MKT uncoated (lead spacing ≤10 mm) insulated (B32559) 10 ±1 s 5 ±1 s