B32922C3474M289

Film Capacitors EMI Suppression Capacitors (MKP) Series/Type: B32921C/D ... B32928C/D Date: July 2020 © TDK Electronics AG 2020. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. EMI suppression capacitors (MKP) B32921C/D ... B32928C/D X2 / 305 V AC Typical applications X2 class for interference suppression "Across the line" applications Dimensional drawings Drawing 1 Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1:2013): 40/105/56 (ENEC10) 40/110/56 (ENEC15) Construction Dielectric: polypropylene (MKP) Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) Features Very small dimensions Self-healing properties RoHS-compatible Halogen-free capacitors available on request Drawing 2 Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Manufacturer's logo, lot number, date code, rated capacitance (coded), cap. tolerance (code letter), rated AC voltage, series number, sub-class (X2), dielectric code (MKP), climatic category, passive flammability category, approvals. Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For taping details, refer to chapter "Taping and packing" Dimensions in mm P1 = 20.3 mm Lead spacing ±0.4 Lead diameter d1 ±0.05 Type Drawing 10 0.6 B32921 1 15 0.8 B32922 1 22.5 0.8 B32923 1 27.5 0.8 B32924 1 37.5 1.0 B32926 1 / 21) 52.5 1.2 B32928 2 1) A few individual types only Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 28 B32921C/D ... B32928C/D X2 / 305 V AC Marking Examples C ≤10 μF C >10 μF Approvals Approval marks Notes: Standards EN 60384-14:2014/A1:2016 IEC 60384-14:2013/AMD1:2016 EN 60384-14:2014/A1:2016 IEC 60384-14:2013/AMD1:2016 UL 1414:2000 UL 1283:2005 CSA C22.2 No.1:2004 CSA C22.2 No.8:2013 Certificate 40010694 (approved by VDE) (C ≤ 10 μF) ENEC-02944 (approved by UL) E97863 / E157153 E97863 / E157153 (approved by UL) GB/T6346.14-2015 CQC06001015331 / CQC06001016454 (C ≤ 10 μF) UL 60384-14:2014 CSA E60384-14:2013 E97863 (approved by UL) Effective January 2014, only for EMI supression capacitors:  UL 60384-14:2014 certification replaces both UL 1414:2000 and UL 1283:2005 standards.  CSA C22.2 No.1.2004 and CSA C22.2 No.8:2013 are replaced by CSA E60384-14:2013.  References like 1414, 1283 are removed from the capacitor marking. Capacitors under UL 1414:2000, UL 1283:2005 produced during or before 2013, are accepted under UL scope. Capacitors under CSA C22.2 No.1:2004 / CSA C22.2 No.8:2013 produced during or before 2013, are accepted under cUL scope. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 28 B32921C/D ... B32928C/D X2 / 305 V AC Overview of available types Lead spacing 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm 52.5 mm Type B32922C/D B32923C/D B32924C/D B32926C/D B32928C/D B32921C/D CR (μF) 0.010 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 3.9 4.7 5.6 6.8 8.2 10 15 20 25 30 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 28 B32921C/D X2 / 305 V AC Ordering codes and packing units (lead spacing 10.0 mm) CR μF 0.010 0.022 0.033 0.047 0.068 0.10 Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 Ordering code Ammo pack (composition see below) pcs./MOQ B32921C3103+*** ◆ 4000 B32921C3223+*** ◆ 4000 B32921C3333+*** ◆ 4000 B32921C3473+*** ◆ 3320 B32921C3683+*** 2720 B32921C3104M*** 2720 Reel Untaped Pins pcs./MOQ 6800 6800 6800 5200 4400 4400 pcs./MOQ 4000 4000 4000 4000 4000 4000 2 2 2 2 2 2 ◆ Preferred type MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 5 of 28 B32922C/D X2 / 305 V AC Ordering codes and packing units (lead spacing 15.0 mm) CR μF 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.33 0.47 0.68 Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 12.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 Ordering code Ammo pack (composition see below) pcs./MOQ B32922C3333K*** 4680 B32922C3473K*** 4680 B32922C3683K*** ◆ 4680 B32922C3104+*** ◆ 4680 B32922C3154+*** ◆ 3840 B32922C3224+*** ◆ 3320 B32922C3334M*** ◆ 2920 B32922D3334K*** 2720 B32922C3474+*** ◆ 2560 B32922C3684+*** ◆  Reel Untaped Pins pcs./MOQ 5200 5200 5200 5200 4400 3600 3000 2800 2800 2200 pcs./MOQ 4000 4000 4000 4000 4000 4000 2000 2000 2000 1200 2 2 2 2 2 2 2 2 2 2 ◆ Preferred type MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 6 of 28 B32923C/D X2 / 305 V AC Ordering codes and packing units (lead spacing 22.5 mm) CR μF 0.22 0.33 0.33 0.47 0.68 1.0 1.5 2.2 Max. dimensions w×h×l mm 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 16.5 × 26.5 11.0 × 20.5 × 26.5 12.0 × 22.0 × 26.5 14.5 × 29.5 × 26.5 Ordering code Ammo pack (composition see below) pcs./MOQ B32923C3224+*** 2720 B32923C3334M*** 2720 B32923D3334K*** 2320 B32923C3474+*** 1920 B32923C3684+*** 1560 B32923C3105+*** ◆ 1480 B32923C3155M***  B32923C3225+***  Reel Untaped Pins pcs./MOQ 2800 2800 2400 2000 1600 1400   pcs./MOQ 2880 2880 2520 2040 2160 2040 1800 1040 2 2 2 2 2 2 2 2 ◆ Preferred type MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 7 of 28 B32924C/D X2 / 305 V AC Ordering codes and packing units (lead spacing 27.5 mm) CR μF 0.68 1.0 1.5 2.2 3.3 3.3 4.7 4.7 5.6 Max. dimensions w×h×l mm 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 12.5 × 21.5 × 31.5 14.0 × 24.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 27.5 × 31.5 18.0 × 33.0 × 31.5 21.0 × 31.0 × 31.5 22.0 × 36.5 × 31.5 Ordering code Ammo pack (composition see below) pcs./MOQ B32924C3684+***  B32924C3105+***  B32924C3155+*** ◆  B32924C3225+***  B32924D3335K***  B32924C3335M***  B32924C3475M***  B32924D3475K***  B32924C3565+***  Reel Untaped Pins pcs./MOQ 1400 1400 1200       pcs./MOQ 1280 1280 1120 1040 880 800 800 720 784 2 2 2 2 2 2 2 2 2 ◆ Preferred type MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 8 of 28 B32926C/D X2 / 305 V AC Ordering codes and packing units (lead spacing 37.5 mm) CR μF 2.2 3.3 3.9 4.7 5.6 6.8 8.2 10 15 15 Max. dimensions w×h×l mm 14.0 × 25.0 × 41.5 16.0 × 28.5 × 41.5 16.0 × 28.5 × 41.5 18.0 × 32.5 × 41.5 18.0 × 32.5 × 41.5 20.0 × 39.5 × 42.0 20.0 × 39.5 × 42.0 28.0 × 42.5 × 42.0 30.0 × 45.0 × 42.0 33.0 × 48.0 × 42.0 Ordering code Ammo pack (composition see below) pcs./MOQ B32926C3225+***  B32926C3335+***  B32926C3395+***  B32926C3475+***  B32926C3565+***  B32926C3685+***  B32926C3825+***  B32926C3106+***  B32926C3156M***  B32926D3156+***  Reel Untaped pcs./MOQ pcs./MOQ  1380 2  800 2  800 2  720 2  720 2  640 2  640 2  440 2  400 2  180 4 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 9 of 28 Pins B32928C/D X2 / 305 V AC Ordering codes and packing units (lead spacing 52.5 mm) CR μF 20 25 30 Max. dimensions w×h×l mm 30.0 × 45.0 × 57.5 35.0 × 50.0 × 57.5 35.0 × 50.0 × 57.5 Ordering code Ammo pack (composition see below) pcs./MOQ B32928C3206+***  B32928C3256+***  B32928C3306M***  Reel Untaped pcs./MOQ    pcs./MOQ 280 4 108 4 108 4 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 10 of 28 Pins B32921C/D ... B32928C/D X2 / 305 V AC Technical data Reference standard: IEC 60384-14:2013/AMD1:2016. All data given at T = 20 °C, unless otherwise specified. Max. operating temperature Top,max Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) +110 °C CR≤0.1 μF 0.1μF2.2 μF at 1 kHz 100 kHz 1.0 5.0 1.0  2.0  Insulation resistance Rins or CR≤0.33 μF CR>0.33 μF time constant τ = CR  Rins at 20 °C, 100 000 MΩ 30 000 s rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage 2121 V, 2 s (C ≤ 10 μF) / 1312 V, 2 s (C > 10 μF) The repetition of this DC voltage test may damage the capacitor. Special care must be taken in case of use several capacitors in a parallel configuration. Passive flammability category Maximum continuous DC voltage VDC B 630 V at Top ≤ 85 °C 1.5% / °C derating when 85 °C < Top ≤ 110 °C 310 V (50/60 Hz) Maximum continuous AC voltage VAC Rated AC voltage (IEC 60384-14) 305 V (50/60 Hz) Operating AC voltage Vop at high Top ≤ 110 °C temperature Top ≤ 110 °C Damp heat test Limit values after damp heat test Please read Cautions and warnings and Important notes at the end of this document. Vop = VAC (continuously) Vop = 1.25  VAC (1000 h) 56 days / 40 °C / 93% relative humidity Capacitance change ΔC/C ≤ 5% Dissipation factor change Δ tan δ ≤ 5.10-3 (at 1 kHz) ≤ 1.0  10-3 (at 10 kHz) Insulation resistance Rins ≥ 50% of minimum as-delivered values or time constant τ = CR  Rins Page 11 of 28 B32921C/D ... B32928C/D X2 / 305 V AC Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/μs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/μs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values Lead spacing dV/dt in V/μs k0 in V2/μs 10 mm 475 408500 15 mm 340 292400 22.5 mm 170 146200 Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 28 27.5 mm 120 103200 37.5 mm 80 68800 52.5 mm 50 43200 B32921C/D ... B32928C/D X2 / 305 V AC Permissible AC current IRMS versus frequency f (for sinusoidal waveforms TA ≤90 °C and ΔESR 1 μF Voltage proof Rins ≥ 50% of initial limit Passive IEC flammability 60384-14:2013/ AMD1:2016 Flame applied for a period of time depending on capacitor volume B Active IEC flammability 60384-14:2013/ AMD1:2016 20 discharges at 2.5 kV + VR The cheesecloth shall not burn with a flame Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 28 B32921C/D ... B32928C/D X2 / 305 V AC Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20:2008, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2:2007, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection 1.2 Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20:2008, test Tb, method 1. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing >10 mm) MFP MKP (lead spacing >7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤7.5 mm) MKT uncoated (lead spacing ≤10 mm) insulated (B32559) Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 28 10 ±1 s 5 ±1 s