B32922H3474M000

Film Capacitors EMI Suppression Capacitors (MKP) Series/Type: B32922H/J ... B32926H/J Date: July 2020 © TDK Electronics AG 2020. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. EMI suppression capacitors (MKP) B32922H/J ... B32926H/J X2 / 305 V AC Typical applications X2 class for interference suppression "Across the line" applications Severe ambient conditions For connections in series with the mains Capacitive power supply Energy meters Dimensional drawings Drawing A1 Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1:2013): 40/110/56 Construction Dielectric: metallised polypropylene (MKP) Wound film technology Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) Dimensions in mm Lead diameter d1 ±0.05 Type Features Self-healing properties High stability of capacitance value AEC-Q200D compliant Number Lead of spacing wires ±0.4 2-pin 15.0 0.8 B32922 H/J 2-pin 22.5 0.8 B32923 H/J 2-pin 27.5 0.8 B32924 H/J 2-pin 37.5 1.0 B32926 H/J Terminals Parallel wire leads Lead-free tinned Standard lead lengths: 6-1 mm Special lead lengths available on request Marking Manufacturer's logo, lot number, date code, rated capacitance (coded), cap. tolerance (code letter), rated AC voltage, series number, sub-class (X2), dielectric code (MKP), climatic category, passive flammability category, approvals Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For taping details, refer to chapter "Taping and packing" Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 22 B32922H/J ... B32926H/J X2 / 305 V AC Marking Example Approvals Approval marks Standards Certificate EN 60384-14:2014/A1:2016 IEC 60384-14:2013/AMD1:2016 ENEC-02944 (approved by UL) UL 60384-14:2014 CSA E60384-14:2013 E97863 (approved by UL) Overview of available types Lead spacing 15 mm 22.5 mm 27.5 mm 37.5 mm Type B32923H/J B32924H/J B32926H/J B32922H/J CR (μF) 0.10 0.15 0.2 0.22 0.33 0.410 0.47 0.56 0.68 0.82 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10 15 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 22 B32922H/J ... B32926H/J X2 / 305 V AC Ordering codes and packing units Lead CR spacing mm μF 15 0.10 0.15 0.20 0.22 0.22 0.33 0.47 22.5 0.22 0.33 0.41 0.47 0.56 0.68 0.68 0.82 1.0 1.5 2.2 Max. dimensions w×h×l mm 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 8.0 × 14.0 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 7.0 × 16.0 × 26.5 8.5 × 16.5 × 26.5 8.5 × 16.5 × 26.5 10.5 × 16.5 × 26.5 10.5 × 18.5 × 26.5 10.5 × 18.5 × 26.5 11.0 × 20.5 × 26.5 11.0 × 20.5 × 26.5 12.0 × 22.0 × 26.5 14.5 × 29.5 × 26.5 14.5 × 29.5 × 26.5 Ordering code (composition see below) B32922H3104+*** B32922H3154+*** B32922H3204+*** B32922H3224M*** B32922J3224+*** B32922H3334+*** B32922H3474+*** B32923H3224+*** B32923J3334+*** B32923H3414M*** B32923H3474+*** B32923H3564+*** B32923H3684M*** B32923J3684+*** B32923H3824+*** B32923H3105+*** B32923H3155+*** B32923H3225M*** Ammo pack pcs./MOQ 3840 3320 2920 2920 2720 2560  2320 1920 1920 1560 1560 1560      Reel Untaped pcs./MOQ 4400 3600 3000 3000 2800 2800 2200 2400 2000 2000 1600 1600 1600      pcs./MOQ 4000 4000 2000 2000 2000 2000 1200 2520 2040 2040 2160 2160 2160 2040 2040 1800 1040 1040 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack for lead spacing 15 mm and 22.5 mm 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 4 of 22 B32922H/J ... B32926H/J X2 / 305 V AC Ordering codes and packing units Lead CR spacing mm μF 27.5 0.68 1.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 37.5 2.2 3.3 4.7 6.8 8.2 10.0 10.0 15.0 Max. dimensions w×h×l mm 11.0 × 19.0 × 31.5 11.0 × 21.0 × 31.5 13.5 × 23.0 × 31.5 14.0 × 24.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 27.5 × 31.5 18.0 × 33.0 × 31.5 19.0 × 30.0 × 31.5 22.0 × 36.5 × 31.5 14.0 × 25.0 × 42.0 16.0 × 28.5 × 42.0 18.0 × 32.5 × 42.0 20.0 × 39.5 × 42.0 28.0 × 37.0 × 42.0 28.0 × 37.0 × 42.0 28.0 × 42.5 × 42.0 33.0 × 48.0 × 42.0 Ordering code (composition see below) B32924H3684+*** B32924H3105+*** B32924H3155M*** B32924J3155+*** B32924J3225+*** B32924H3225+*** B32924J3335+*** B32924H3335M*** B32924H3475+*** B32926H3225+*** B32926H3335+*** B32926H3475+*** B32926H3685+*** B32926J3825+*** B32926H3106M*** B32926J3106+*** B32926H3156+*** Ammo pack pcs./MOQ                  Reel Untaped pcs./MOQ 1400 1400 1000               pcs./MOQ 1280 1280 1040 1040 880 800 800 720 640 1380 800 720 640 440 440 440 180 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack for lead spacing 15 mm and 22.5 mm 189 = Straight terminals, Reel 003 = Straight terminals, untaped (lead length 3.2 ±0.3 mm) 000 = Straight terminals, untaped (lead length 6 1 mm) Page 5 of 22 B32922H/J ... B32926H/J X2 / 305 V AC Technical data and specifications Reference standard: IEC 60384-14:2013/AMD1:2016 / UL 60384-14:2014/A1:2016 and AEC-Q200D. All data given at T = 20 °C, unless otherwise specified. Rated AC voltage 305 V (50/60 Hz) (IEC 60384-14:2013) Rated DC voltage VDC 630 V DC voltage test Between terminals: 1312 V DC / 2 s The repetition of this DC voltage test may damage the capacitor. Special care must be taken in case of use several capacitors in a parallel configuration. Max. operating temperature Top,max +110 °C -3 Dissipation factor tan δ (in 10 ) at CR≤0.1 μF 0.1μF2.2 μF at 20 °C (upper limit values) 1 kHz 1.0 1.0 2.0 100 kHz 5.0   Insulation resistance Rins (in GΩ) CR ≤ 0.33 μF CR > 0.33 μF or time constant τ = CR  Rins (in s) 100 GΩ 30 000 s at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) Operating AC voltage Vop Top ≤ 110 °C Vop = VAC (continuously) at high temperature Top ≤ 110 °C Vop = 1.25  VAC (1000 h) Passive flammability category B Damp heat test Test 1: Test 2: Temperature: 85 °C ±2 °C 60 °C ±2 °C Relative humidity (RH): 85% ±2% 95% ±2% Test duration: 1000 h 1000 h Voltage value: 240 V AC, 50 Hz 240 V AC, 50 Hz Limit values after damp heat test Please read Cautions and warnings and Important notes at the end of this document. Capacitance change |ΔC/C| ≤ 10% Dissipation factor change Δtan δ ≤ 5.10–3 (at 1 kHz) for lead spacing 15 mm and 22.5 mm Dissipation factor change Δtan δ ≤ 2  10–2 (at 1 kHz) for lead spacing 27.5 mm and 37.5 mm Δtan δ/tan δ ≤ 2000% (at 10 kHz) Insulation resistance Rins ≥ 200 MΩ Page 6 of 22 B32922H/J ... B32926H/J X2 / 305 V AC Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/μs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/μs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values Lead spacing dV/dt in V/μs k0 in V2/μs 15 mm 340 292400 22.5 mm 170 146200 Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 22 27.5 mm 120 103200 37.5 mm 80 68800 B32922H/J ... B32926H/J X2 / 305 V AC Permissible AC current IRMS versus frequency f (for sinusoidal waveform, TA ≤90 °C and ΔESR 1 μF Voltage proof Rins ≥ 50% of initial limit B32922H/J ... B32926H/J X2 / 305 V AC Test Impulse test Endurance Reference IEC 60384-14:2013/ AMD1:2016 Conditions of test 3 impulses TB / 1.25 VR / 1000 hours, 1000 VRMS for 0.1 s every hour Performance requirements No visible damage ΔC/C0 ≤ 10% Δ tan δ ≤ 0.008 for C ≤ 1 μF Δ tan δ ≤ 0.005 for C > 1 μF Voltage proof Rins ≥ 50% of initial limit Passive IEC flammability 60384-14:2013/ AMD1:2016 Flame applied for a period of time depending on capacitor volume B Active IEC flammability 60384-14:2013/ AMD1:2016 20 discharges at 2.5 kV + VR The cheesecloth shall not burn with a flame Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Please read Cautions and warnings and Important notes at the end of this document. Wetting of wire surface by new solder ≥90%, free-flowing solder Page 10 of 22 B32922H/J ... B32926H/J X2 / 305 V AC 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing >10 mm) MFP MKP (lead spacing >7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤7.5 mm) MKT uncoated (lead spacing ≤10 mm) insulated (B32559) 10 ±1 s 5 ±1 s