B32924C3475M289

Film Capacitors EMI Suppression Capacitors (MKP) Series/Type: Date: B32921C/D ... B32926C/D May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EMI suppression capacitors (MKP) X2 / 305 V AC B32921C/D ... B32926C/D Typical applications X2 class for interference suppression "Across the line" applications Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1): 40/105/56 Construction Dielectric: polypropylene (MKP) Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) Dimensional drawing Dimensions in mm Features Very small dimensions Self-healing properties Terminals Parallel wire leads, lead-free tinned Standard lead lengths: 6 1 mm Special lead lengths available on request Marking Manufacturer's logo, lot number, date code, rated capacitance (coded), cap. tolerance (code letter), rated AC voltage, series number, sub-class (X2), dielectric code (MKP), climatic category, passive flammability category, approvals. Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For taping details, refer to chapter "Taping and packing" Approvals Approval marks Standards EN 60384-14, IEC 60384-14 UL 1414 / UL 1283 CSA C22.2 No.1 / No. 8 CQC (GB/T 14472-1998) Certificate 40010694 E97863 / E157153 E97863 / E157153 (approved by UL) CQC06001015331 / CQC06001016454 Lead spacing ±0.4 10 15 22.5 27.5 37.5 Lead diameter d1 0.6 0.8 0.8 0.8 1.0 Type B32921 B32922 B32923 B32924 B32926 Marking Examples = 10 mm ≥ 15 mm/CR≤1 µF = 22.5, 27.5, 37 mm/CR>1 µF Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 18 B32921C/D ... B32926C/D X2 / 305 V AC Overview of available types Lead spacing 10 mm Type CR (µF) 0.010 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 B32921 15 mm B32922 22.5 mm B32923 27.5 mm B32924 37.5 mm B32926 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 18 B32921C/D ... B32926C/D X2 / 305 V AC Ordering codes and packing units Lead spacing CR mm 10 µF 0.010 0.022 0.033 0.047 0.068 0.10 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.33 0.47 0.68 0.22 0.33 0.33 0.47 0.68 1.0 1.5 2.2 Max. dimensions w×h×l mm 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 6.0 × 12.0 × 13.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 12.0 × 18.0 7.0 × 12.5 × 18.0 8.0 × 14.0 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 16.5 × 26.5 11.0 × 20.5 × 26.5 12.0 × 22.0 × 26.5 14.5 × 29.5 × 26.5 Ordering code (composition see below) B32921C3103+*** x B32921C3223+*** x B32921C3333+*** x B32921C3473+*** x B32921C3683+*** B32921C3104M*** B32922C3333K*** B32922C3473K*** B32922C3683K*** x B32922C3104+*** x B32922C3154+*** x B32922C3224+*** x B32922C3334M*** x B32922D3334K*** B32922C3474+*** x B32922C3684+*** x B32923C3224+*** B32923C3334M*** B32923D3334K*** B32923C3474+*** B32923C3684+*** B32923C3105+*** x B32923C3155M*** B32923C3225+*** Ammo pack pcs./MOQ 4000 4000 4000 3320 2720 2720 4680 4680 4680 4680 3840 3320 2920 2720 2560 2720 2720 2320 1920 1560 1480 Reel pcs./ MOQ 6800 6800 6800 5200 4400 4400 5200 5200 5200 5200 4400 3600 3000 2800 2800 2200 2800 2800 2400 2000 1600 1400 Untaped pcs./ MOQ 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 2000 2000 2000 1000 2880 2880 2520 2040 2160 2040 1800 1040 15 22.5 x Preferred type MOQ = Minimum Order Quantity, consisting of 4 packing units. For new design, please refer to the B3292xE/F data sheet. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) (Closer tolerances on request) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 18 B32921C/D ... B32926C/D X2 / 305 V AC Ordering codes and packing units Lead spacing CR mm 27.5 µF 0.68 1.0 1.5 2.2 3.3 3.3 4.7 4.7 2.2 3.3 4.7 6.8 10 Max. dimensions w×h×l mm 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 12.5 × 21.5 × 31.5 14.0 × 24.5 × 31.5 16.0 × 32.0 × 31.5 18.0 × 27.5 × 31.5 18.0 × 33.0 × 31.5 21.0 × 31.0 × 31.5 14.0 × 25.0 × 41.5 16.0 × 28.5 × 41.5 18.0 × 32.5 × 41.5 20.0 × 39.5 × 41.5 28.0 × 42.5 × 41.5 Ordering code (composition see below) B32924C3684+*** B32924C3105+*** B32924C3155+*** x B32924C3225+*** B32924D3335K*** B32924C3335M*** B32924C3475M*** B32924D3475K*** B32926C3225+*** B32926C3335+*** B32926C3475+*** B32926C3685+*** B32926C3106+*** Ammo Reel pack pcs./ pcs./MOQ MOQ 1400 1400 1200 Untaped pcs./ MOQ 1280 1280 1120 1040 880 800 800 720 1380 800 720 640 440 37.5 x Preferred type MOQ = Minimum Order Quantity, consisting of 4 packing units. For new design, please refer to the B3292xE/F data sheet. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) (Closer tolerances on request) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 18 B32921C/D ... B32926C/D X2 / 305 V AC Technical data Max. operating temperature Top,max Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) Insulation resistance Rins or time constant τ = CR Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage Passive flammability category to IEC 40 (CO) 752 +110 °C CR≤0.1 µF 0.1µF2.2 µF at 1 kHz 100 kHz 1.0 5.0 CR>0.33 µF 1.0 2.0 CR≤0.33 µF 100 000 MΩ 30 000 s 2121 V, 2 s B Maximum continuous DC voltage VDC 630 V Maximum continuous AC voltage VAC 310 V (50/60 Hz) Rated AC voltage (IEC 60384-14) Operating AC voltage Vop at high temperature Damp heat test Limit values after damp heat test 305 V (50/60 Hz) TA ≤ 110 °C TA ≤ 110 °C Vop = VAC Vop = 1.25 (continuously) VAC (1000 h) 56 days / 40 °C / 93% relative humidity Capacitance change ∆C/C ≤ 5% Dissipation factor change ∆ tan δ ≤ 0.5 10-3 (at 1 kHz) Insulation resistance Rins ≤ 1.0 10-3 (at 10 kHz) or time constant τ = CR Rins ≥ 50% of minimum as-delivered values Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 18 B32921C/D ... B32926C/D X2 / 305 V AC Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values Lead spacing dV/dt in V/µs k0 in V2/µs 10 mm 475 408500 15 mm 340 292400 22.5 mm 170 146200 27.5 mm 120 103200 37.5 mm 80 68800 Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 18 B32921C/D ... B32926C/D X2 / 305 V AC Mounting guidelines 1 1.1 Soldering Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature Soldering time Immersion depth Evaluation criteria: Visual inspection 1.2 235 ±5 °C 2.0 ±0.5 s 2.0 +0/ 0.5 mm from capacitor body or seating plane Wetting of wire surface by new solder ≥90%, free-flowing solder Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time 10 ±1 s MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) 5 ±1 s