B32934A3564M

Film Capacitors EMI Suppression Capacitors (MKT) Series/Type: B32932 ... B32936 Date: June 2020 © TDK Electronics AG 2020. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. EMI Suppression Capacitors (MKT) B32932 ... B32936 X2 heavy duty series / 305 V AC Typical applications For connection in series with the mains For severe ambient conditions Capacitive power supply applications Energy meters Dimensional drawing Climatic Max. operating temperature: 105 °C Climatic category (IEC 60068-1:2013): 40/105/56 Features High stability of capacitance value X2 safety approval (up to 2.2 μF) RoHS-compatible AEC-Q200D compliant Construction Dielectric: metallized polyester Internal series connection Plastic case (UL 94 V-0) Epoxy resin sealing, flame-retardant Terminals Parallel wire leads, lead-free tinned Standard lead lengths: 6 1 mm Special lead lengths available on request Dimensions in mm Lead spacing ±0.4 Lead diameter d1 ±0.05 Type 15 0.8 B32932 22.5 0.8 B32933 27.5 0.8 B32934 37.5 1.0 B32936 Marking Manufacturer's logo, lot number, date code, rated capacitance (coded), capacitance tolerance (code letter), rated AC voltage (IEC), series number, sub-class (X2), dielectric code (MKT), climatic category Delivery mode Bulk (untaped, lead length 6 - 1 mm) Taped (Ammo pack or reel) Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 19 B32932 ... B32936 X2 heavy duty series / 305 V AC Marking example Approvals Approval mark Standards Certificate EN 60384-14:2014/A1:2016 IEC 60384-14:2013/AMD1:2016 40028058 UL 60384-14:2014 E97863 CSA E60384-14:2013 E97863 Note: X2 safety approval for C ≤2.2 μF Overview of available types Lead spacing 15 mm 22.5 mm 27.5 mm 37.5 mm Type B32933 B32934 B32936 B32932 CR (μF) 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.56 0.68 0.82 1.0 1.5 2.2 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 19 B32932 ... B32936 X2 heavy duty series / 305 V AC Ordering codes and packing units Lead CR spacing mm μF 15 0.047 0.068 0.10 0.15 0.22 0.33 0.47 22.5 0.10 0.15 0.22 0.33 0.47 0.47 0.56 0.68 0.82 1.0 1.0 1.5 Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 7.0 × 16.0 × 26.5 8.5 × 16.5 × 26.5 10.5 × 16.5 × 26.5 10.5 × 16.5 × 26.5 10.5 × 18.5 × 26.5 12.0 × 22.0 × 26.5 12.0 × 22.0 × 26.5 14.5 × 29.5 × 26.5 14.5 × 29.5 × 26.5 Ordering code (composition see below) B32932A3473+*** B32932A3683+*** B32932A3104+*** B32932A3154+*** B32932A3224+*** B32932A3334+*** B32932A3474M*** B32933A3104+*** B32933A3154+*** B32933A3224+*** B32933A3334+*** B32933A3474M*** B32933B3474+*** B32933A3564+*** B32933A3684+*** B32933A3824+*** B32933A3105M*** B32933B3105+*** B32933A3155+*** Ammo pack pcs./MOQ 4680 4680 3840 3320 2720 2560 – 2720 2720 2320 2320 1920 1560 1560 1560 – – – – Reel Untaped X2 safety pcs./MOQ pcs./MOQ appr. 5200 4000 X 5200 4000 X 4400 4000 X 3600 4000 X 2800 2000 X 2800 2000 X 2200 1200 X 2800 2880 X 2800 2880 X 2400 2520 X 2400 2520 X 2000 2040 X 1600 2160 X 1600 2160 X 1600 2160 X – 1800 X – 1800 X – 1040 X – 1040 X X = approval granted MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 000 = Straight terminals, Untaped (standard lead length 6 1 mm) Page 4 of 19 B32932 ... B32936 X2 heavy duty series / 305 V AC Ordering codes and packing units Lead CR spacing mm μF 27.5 0.47 0.56 0.68 0.82 1.0 1.0 1.5 1.5 2.2 37.5 1.0 1.5 2.2 Max. dimensions w×h×l mm 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 21.0 × 31.5 13.5 × 23.0 × 31.5 14.0 × 24.5 × 31.5 18.0 × 27.5 × 31.5 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 14.0 × 25.0 × 41.5 Ordering code (composition see below) B32934A3474+*** B32934A3564+*** B32934A3684+*** B32934A3824+*** B32934A3105M*** B32934B3105+*** B32934B3155M*** B32934D3155+*** B32934B3225+*** B32936A3105+*** B32936A3155+*** B32936A3225+*** Ammo pack pcs./MOQ – – – – – – – – – – – – Reel Untaped X2 safety pcs./MOQ pcs./MOQ appr. 1400 1280 X 1400 1280 X 1400 1280 X 1400 1280 X 1400 1280 X 1400 1280 X 1200 1120 X – 1040 X – 800 X – 1620 X – 1620 X – 1380 X X = approval granted MOQ = Minimum Order Quantity, consisting of 4 packing units. Further intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% Please read Cautions and warnings and Important notes at the end of this document. *** = Packaging code: 289 = Straight terminals, Ammo pack 189 = Straight terminals, Reel 000 = Straight terminals, Untaped (standard lead length 6 1 mm) Page 5 of 19 B32932 ... B32936 X2 heavy duty series / 305 V AC Technical data Reference standard: IEC 60384-14:2013/AMD1:2016 and AEC-Q200D. Max. operating temperature Top,max (Top = TA + self-heating) +105 °C Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) at C ≤ 1 μF 1 kHz 8 10 kHz 15 CR ≤ 0.33 μF 30 000 MΩ Insulation resistance Rins or time constant τ = CR  Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage Passive flammability category to IEC 40 (CO) 752 Capacitance tolerances (measured at 1 kHz) Rated AC voltage ( IEC 60384-14 ) Maximum continuous DC voltage VDC Operating voltage Vop at high temperature Damp heat test Limit values after damp heat test Please read Cautions and warnings and Important notes at the end of this document. C > 1 μF 8  CR > 0.33 μF 10 000 s 1312 V DC, 2 s (4.3  VR according to IEC 60384-14) B ±10% (K), ±20% (M) 305 V (50/60 Hz) 500 V at Top ≤ 85 °C 1.5% / °C derating when 85 °C < Top ≤ 110 °C Top ≤ 105 °C Vop = 1.25  VAC (1000 h) Test conditions: 1. Temperature: Relative humidity (RH): Test duration: Voltage value: +85 °C ±2 °C 85% ±2% 1000 hours 240 V AC, 50 Hz 2. Temperature: Relative humidity (RH): Test duration: Voltage value: +40 °C ±2 °C 93% ±2% 2000 hours 305 V AC, 50 Hz Capacitance change (ΔC/C): Dissipation factor change (Δtan δ): Δtan δ/tan δ: Insulation resistance Rins or time constant τ = CR  Rins: Page 6 of 19 ≤ 10% ≤ 5  10-3 (at 1 kHz) ≤ 100% (at 10 kHz) > 10 MΩ B32932 ... B32936 X2 heavy duty series / 305 V AC Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/μs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/μs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values Lead spacing (mm) dV/dt (V/μs) k0 (V2/μs) 15 90 108000 22.5 50 60000 27.5 35 42000 37.5 25 30000 Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Please read Cautions and warnings and Important notes at the end of this document. Wetting of wire surface by new solder ≥90%, free-flowing solder Page 7 of 19 B32932 ... B32936 X2 heavy duty series / 305 V AC 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing >10 mm) MFP MKP (lead spacing >7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤7.5 mm) MKT uncoated (lead spacing ≤10 mm) insulated (B32559) 10 ±1 s 5 ±1 s