B37940K5471J070

Multilayer ceramic capacitors Chip capacitors, C0G Date: October 2006 Data Sheet ã EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited. Multilayer ceramic capacitors Chip C0G Ordering code system B37940 K 5 010 C 5 60 Packaging 60 62 70 72 01 ^ ^ ^ ^ ^ cardboard tape, 180-mm reel blister tape, 180-mm reel cardboard tape, 330-mm reel blister tape, 330-mm reel bulk case Decimal place for cap. values 104 >1000 >100 –55 … +125 none VDC VDC MW MW s s °C Multilayer ceramic capacitors C0G C0G Capacitance tolerances CR £ 4.7 pF 5.6 pF £ CR £ 8.2 pF Code letter B C (standard) Tolerance ± 0.1 pF ± 0.25 pF (on request) D B C D (standard) ± 0.5 pF ± 0.1 pF ± 0.25 pF ± 0.5 pF (on request) (on request) CR ³ 10 pF Code letter F G J (standard) Tolerance ±1% (on request for 50 V ± 2% (on request for 50 V ± 5% and 100 V; not available for and 100 V; not available for 200 V) 200 V) K ±10% Dimensional drawing s b k k KKE0329-N Dimensions (mm) Case size (inch) (mm) 0402 1005 0603 1608 0805 2012 1206 3216 1210 3225 l 1.0 ± 0.10 1.6 ± 0.15 2.00 ± 0.20 3.20 ± 0.20 3.20 ± 0.30 b 0.5 ± 0.05 0.8 ± 0.10 1.25 ± 0.15 1.60 ± 0.15 2.50 ± 0.30 s 0.5 ± 0.05 0.8 ± 0.10 1.30 max. 1.30 max. 1.70 max. k 0.1 –0.40 0.1 –0.40 0.13 –0.75 0.25 –0.75 0.25 –0.75 Tolerances to CECC 32101-801 Please read Cautions and warnings and Important notes at the end of this document. 4 10/06 Multilayer ceramic capacitors C0G C0G Recommended solder pad C A D KKE0308-1 Recommended dimensions (mm) for reflow soldering Case size (inch/mm) Type A C D 0402/1005 single chip 0.35 … 0.45 1.0 … 1.40 0.4 … 0.6 0603/1608 single chip 0.60 … 0.70 1.8 … 2.20 0.6 … 0.8 0805/2012 single chip 0.60 … 0.70 2.2 … 2.60 0.8 … 1.1 1206/3216 single chip 0.80 … 0.90 3.8 … 4.32 1.0 … 1.4 1210/3225 single chip 1.00 … 1.20 4.0 … 4.80 1.8 … 2.3 Recommended dimensions (mm) for wave soldering Case size (inch/mm) Type A C D 0603/1608 single chip 0.8 … 0.9 2.2 … 2.8 0.6 … 0.8 0805/2012 single chip 0.9 … 1.0 2.8 … 3.2 0.8 … 1.1 1206/3216 single chip 1.0 … 1.1 4.2 … 4.8 1.0 … 1.4 Termination Termination (nickel barrier) Ceramic body Inner electrode Substrate electrode Intermediate electrode External electrode AgPd Ag Ni Sn KKE0484-W Please read Cautions and warnings and Important notes at the end of this document. 5 10/06 C0G Multilayer ceramic capacitors C0G Product range chip capacitors, C0G Size1) inch mm 0402 1005 Type B37920 VR (VDC) 50 CR 0603 1608 0805 2012 1206 3216 1210 3225 B37930 B37940 B37871 B37949 50 100 50 100 200 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10 pF 12 pF 15 pF 18 pF 22 pF 27 pF 33 pF 39 pF 47 pF 56 pF 68 pF 82 pF 1) l ´ b (inch) / l ´ b (mm) Please read Cautions and warnings and Important notes at the end of this document. 6 10/06 50 100 50 100 Multilayer ceramic capacitors C0G C0G Product range chip capacitors, C0G Size1) inch mm 0402 1005 Type B37920 VR (VDC) 50 CR 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 0603 1608 0805 2012 1206 3216 1210 3225 B37930 B37940 B37871 B37949 50 100 50 100 200 1.0 nF 1.2 nF 1.5 nF 1.8 nF 2.2 nF 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF 1) l ´ b (inch) / l ´ b (mm) Please read Cautions and warnings and Important notes at the end of this document. 7 10/06 50 100 50 100 C0G Multilayer ceramic capacitors C0G; 0402 Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations Case size 0402, 50 VDC Chip thickness CR1) 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10. pF 12. pF 15. pF 18. pF 22. pF 27. pF 33. pF 39. pF 47. pF 56. pF 68. pF 82. pF 100. pF Ordering code 2) B37920K5030C3** B37920K5030C9** B37920K5040C7** B37920K5050D6** B37920K5060D8** B37920K5080D2** B37920K5100J0** B37920K5120J0** B37920K5150J0** B37920K5180J0** B37920K5220J0** B37920K5270J0** B37920K5330J0** B37920K5390J0** B37920K5470J0** B37920K5560J0** B37920K5680J0** B37920K5820J0** B37920K5101J0** Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 mm 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 1) Capacitance values < 3.3 pF and > 100 pF on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 8 10/06 Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 Multilayer ceramic capacitors C0G C0G; 0603 Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations Case size 0603, 50 VDC Chip thickness CR 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10. pF 12. pF 15. pF 18. pF 22. pF 27. pF 33. pF 39. pF 47. pF 56. pF 68. pF 82. pF 100. pF 120. pF 150. pF 180. pF 220. pF 270. pF 330. pF 390. pF 470. pF Ordering code 1) B37930K5010C0** B37930K5010C2** B37930K5010C5** B37930K5010C8** B37930K5020C2** B37930K5020C7** B37930K5030C3** B37930K5030C9** B37930K5040C7** B37930K5050D6** B37930K5060D8** B37930K5080D2** B37930K5100J0** B37930K5120J0** B37930K5150J0** B37930K5180J0** B37930K5220J0** B37930K5270J0** B37930K5330J0** B37930K5390J0** B37930K5470J0** B37930K5560J0** B37930K5680J0** B37930K5820J0** B37930K5101J0** B37930K5121J0** B37930K5151J0** B37930K5181J0** B37930K5221J0** B37930K5271J0** B37930K5331J0** B37930K5391J0** B37930K5471J0** mm 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 9 10/06 Bulk case ** ^ 01 pcs 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 C0G Multilayer ceramic capacitors C0G; 0603 Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations Case size 0603, 100 VDC Chip thickness CR 1.0 pF 1.5 pF 2.2 pF 3.3 pF 4.7 pF 6.8 pF 10. pF 15. pF 22. pF 33. pF 47. pF 68. pF 100. pF 150. pF 220. pF Ordering code 1) B37930K1010C0** B37930K1010C5** B37930K1020C2** B37930K1030C3** B37930K1040C7** B37930K1060D8** B37930K1100J0** B37930K1150J0** B37930K1220J0** B37930K1330J0** B37930K1470J0** B37930K1680J0** B37930K1101J0** B37930K1151J0** B37930K1221J0** mm 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 10 10/06 Bulk case ** ^ 01 pcs 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 Multilayer ceramic capacitors C0G C0G; 0805 Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations Case size 0805, 50 VDC Chip thickness CR 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10. pF 12. pF 15. pF 18. pF 22. pF 27. pF 33. pF 39. pF 47. pF 56. pF 68. pF 82. pF 100. pF 120. pF 150. pF 180. pF 220. pF 270. pF 330. pF 390. pF 470. pF Ordering code 1) B37940K5010C0** B37940K5010C2** B37940K5010C5** B37940K5010C8** B37940K5020C2** B37940K5020C7** B37940K5030C3** B37940K5030C9** B37940K5040C7** B37940K5050D6** B37940K5060D8** B37940K5080D2** B37940K5100J0** B37940K5120J0** B37940K5150J0** B37940K5180J0** B37940K5220J0** B37940K5270J0** B37940K5330J0** B37940K5390J0** B37940K5470J0** B37940K5560J0** B37940K5680J0** B37940K5820J0** B37940K5101J0** B37940K5121J0** B37940K5151J0** B37940K5181J0** B37940K5221J0** B37940K5271J0** B37940K5331J0** B37940K5391J0** B37940K5471J0** mm 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 11 10/06 Bulk case ** ^ 01 pcs 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 C0G Multilayer ceramic capacitors C0G; 0805 Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations Case size 0805, 50 VDC Chip thickness CR 560. pF 680. pF 820. pF 1.0 nF 1.2 nF 1.5 nF 1.8 nF 2.2 nF Ordering code 1) B37940K5561J0** B37940K5681J0** B37940K5821J0** B37940K5102J0** B37940K5122J0** B37940K5152J0** B37940K5182J0** B37940K5222J0** mm 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 5000 5000 5000 5000 4000 4000 3000 2) 3000 2) Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 20000 20000 20000 20000 16000 16000 12000 3) 12000 3) 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. 2) Blister tape, 180-mm reel, ordering code ** ^ 62 3) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 12 10/06 Bulk case ** ^ 01 pcs 10000 10000 10000 10000 – – – – Multilayer ceramic capacitors C0G C0G; 0805 Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations Case size 0805, 100 VDC Chip thickness CR 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10. pF 12. pF 15. pF 18. pF 22. pF 27. pF 33. pF 39. pF 47. pF 56. pF 68. pF 82. pF 100. pF 120. pF 150. pF 180. pF 220. pF 270. pF 330. pF 390. pF 470. pF Ordering code 1) B37940K1010C0** B37940K1010C2** B37940K1010C5** B37940K1010C8** B37940K1020C2** B37940K1020C7** B37940K1030C3** B37940K1030C9** B37940K1040C7** B37940K1050D6** B37940K1060D8** B37940K1080D2** B37940K1100J0** B37940K1120J0** B37940K1150J0** B37940K1180J0** B37940K1220J0** B37940K1270J0** B37940K1330J0** B37940K1390J0** B37940K1470J0** B37940K1560J0** B37940K1680J0** B37940K1820J0** B37940K1101J0** B37940K1121J0** B37940K1151J0** B37940K1181J0** B37940K1221J0** B37940K1271J0** B37940K1331J0** B37940K1391J0** B37940K1471J0** Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 mm 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 13 10/06 Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 C0G Multilayer ceramic capacitors C0G; 0805 Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations Case size 0805, 100 VDC Chip thickness CR 560. pF 680. pF 820. pF 1.0 nF Ordering code 1) B37940K1561J0** B37940K1681J0** B37940K1821J0** B37940K1102J0** Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 4000 4000 3000 3) 3000 3) mm 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 16000 16000 12000 4) 12000 4) Ordering codes and packing for C0G, 200 VDC, nickel barrier terminations Case size 0805, 200 VDC Chip thickness CR2) 2.2 pF 3.3 pF 4.7 pF 6.8 pF 10. pF 15. pF 22. pF 33. pF 47. pF 68. pF 100. pF 150. pF 220. pF 330. pF Ordering code 1) B37940K2020C2** B37940K2030C3** B37940K2040C7** B37940K2060D8** B37940K2100J0** B37940K2150J0** B37940K2220J0** B37940K2330J0** B37940K2470J0** B37940K2680J0** B37940K2101J0** B37940K2151J0** B37940K2221J0** B37940K2331J0** Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 4000 4000 30003) mm 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. 3) Blister tape, 180-mm reel, ordering code ** ^ 62 4) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 14 10/06 Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 16000 16000 120004) Multilayer ceramic capacitors C0G C0G; 1206 Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations Case size 1206, 50 VDC Chip thickness CR 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10. pF 12. pF 15. pF 18. pF 22. pF 27. pF 33. pF 39. pF 47. pF 56. pF 68. pF 82. pF 100. pF 120. pF 150. pF 180. pF 220. pF 270. pF 330. pF 390. pF 470. pF Ordering code 1) B37871K5010C0** B37871K5010C2** B37871K5010C5** B37871K5010C8** B37871K5020C2** B37871K5020C7** B37871K5030C3** B37871K5030C9** B37871K5040C7** B37871K5050D6** B37871K5060D8** B37871K5080D2** B37871K5100J0** B37871K5120J0** B37871K5150J0** B37871K5180J0** B37871K5220J0** B37871K5270J0** B37871K5330J0** B37871K5390J0** B37871K5470J0** B37871K5560J0** B37871K5680J0** B37871K5820J0** B37871K5101J0** B37871K5121J0** B37871K5151J0** B37871K5181J0** B37871K5221J0** B37871K5271J0** B37871K5331J0** B37871K5391J0** B37871K5471J0** Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 mm 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 15 10/06 Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 C0G Multilayer ceramic capacitors C0G; 1206 Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations Case size 1206, 50 VDC Chip thickness CR 560. pF 680. pF 820. pF 1.0 nF 1.2 nF 1.5 nF 1.8 nF 2.2 nF 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF Ordering code 1) B37871K5561J0** B37871K5681J0** B37871K5821J0** B37871K5102J0** B37871K5122J0** B37871K5152J0** B37871K5182J0** B37871K5222J0** B37871K5272J0** B37871K5332J0** B37871K5392J0** B37871K5472J0** B37871K5562J0** Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 2) 3000 2) mm 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. 2) Blister tape, 180-mm reel, ordering code ** ^ 62 3) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 16 10/06 Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 12000 3) 12000 3) Multilayer ceramic capacitors C0G C0G; 1206 Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations Case size 1206, 100 VDC Chip thickness CR 1.0 pF 1.5 pF 2.2 pF 3.3 pF 4.7 pF 6.8 pF 10. pF 15. pF 22. pF 33. pF 47. pF 68. pF 100. pF 150. pF 220. pF 330. pF 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF Ordering code 1) B37871K1010C0** B37871K1010C5** B37871K1020C2** B37871K1030C3** B37871K1040C7** B37871K1060D8** B37871K1100J0** B37871K1150J0** B37871K1220J0** B37871K1330J0** B37871K1470J0** B37871K1680J0** B37871K1101J0** B37871K1151J0** B37871K1221J0** B37871K1331J0** B37871K1471J0** B37871K1681J0** B37871K1102J0** B37871K1152J0** B37871K1222J0** Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 30002) mm 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. 2) Blister tape, 180-mm reel, ordering code ** ^ 62 3) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 17 10/06 Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 120003) C0G Multilayer ceramic capacitors C0G; 1210 Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations Case size 1210, 50 VDC Chip thickness CR 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF Ordering code 1) B37949K5102J0** B37949K5152J0** B37949K5222J0** B37949K5332J0** B37949K5472J0** B37949K5682J0** B37949K5103J0** Blister tape, Æ 180-mm reel ** ^ 62 pcs/reel 4000 4000 4000 4000 4000 4000 3000 mm 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 Blister tape, Æ 330-mm reel ** ^ 72 pcs/reel 16000 16000 16000 16000 16000 16000 12000 Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations Case size 1210, 100 VDC Chip thickness CR 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF Ordering code 1) B37949K1102J0** B37949K1152J0** B37949K1222J0** B37949K1332J0** B37949K1472J0** B37949K1682J0** Blister tape, Æ 180-mm reel ** ^ 62 pcs/reel 4000 4000 4000 4000 3000 3000 mm 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 18 10/06 Blister tape, Æ 330-mm reel ** ^ 72 pcs/reel 16000 16000 16000 16000 12000 12000 Multilayer ceramic capacitors C0G C0G Typical characteristics 1) Capacitance change DC/C25 versus temperature T (tolerance range ) ∆C C 25 Capacitance change DC/C0 versus superimposed DC voltage V KKE0107-F 1.0 % KKE0458-8 0.5 0.6 ∆C % C0 0.3 0.4 0.2 0.2 0.1 0 0 _ 0.2 _ 0.1 _ 0.4 _ 0.2 _ 0.6 _ 0.3 _ 0.8 _ 0.4 _ 1.0 _ 55 _ 40 _ 20 0 20 40 60 80 KKE0124-5 10 5 Z 10 4 10 3 10 2 10 1 0 40 80 120 160 V 200 V Dissipation factor tan d versus temperature T Impedance |Z| versus frequency f Ω _ 0.5 ˚C 120 T 1 pF 10 _2 KKE0118-V tan δ 10 pF 10 _3 100 pF 1 nF 10 _4 10 0 10 10 _1 _2 10 0 10 1 10 2 10 MHz 10 3 f _5 _ 60 _ 40 _ 20 0 20 40 60 80 100 C 140 ˚ T 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 19 10/06 Multilayer ceramic capacitors C0G C0G Typical characteristics 1) Capacitance change DC/C1 versus time t Insulation resistance Rins versus temperature T KKE0129-B 10 8 MΩ KKE0100-S 5 ∆C % C1 0 R ins 10 6 _5 10 5 _ 10 10 4 _ 15 10 3 10 2 0 20 40 60 80 100 _ 20 10 0 ˚C 140 T 10 1 10 2 h 10 3 t 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 20 10/06 Multilayer ceramic capacitors Cautions and warnings Notes on the selection of ceramic capacitors In the selection of ceramic capacitors, the following criteria must be considered: 1. Depending on the application, ceramic capacitors used to meet high quality requirements should at least satisfy the specifications to AEC-Q200. They must meet quality requirements going beyond this level in terms of ruggedness (e.g. mechanical, thermal or electrical) in the case of critical circuit configurations and applications (e.g. in safety-relevant applications such as ABS and airbag equipment or durable industrial goods). 2. At the connection to the battery or power supply (e.g. clamp 15 or 30 in the automobile) and at positions with stranding potential, to reduce the probability of short circuits following a fracture, two ceramic capacitors must be connected in series and/or a ceramic capacitor with integrated series circuit should be used. The MLSC from EPCOS contains such a series circuit in a single component. 3. Ceramic capacitors with the temperature characteristics Z5U and Y5V do not satisfy the requirements to AEC-Q200 and are mechanically and electrically less rugged than C0G or X7R/X8R ceramic capacitors. In applications that must satisfy high quality requirements, therefore, these capacitors should not be used as discrete components (see the chapter “Effects on mechanical, thermal and electrical stress”, point 1.4). 4. For ESD protection, preference should be given to the use of multilayer varistors (MLV) (see the chapter “Effects on mechanical, thermal and electrical stress”, point 1.4). 5. An application-specific derating or continuous operating voltage must be considered in order to cushion (unexpected) additional stresses (see the chapter “Reliability”). The following should be considered in circuit board design 1. If technically feasible in the application, preference should be given to components having an optimal geometrical design. 2. At least FR4 circuit board material should be used. 3. Geometrically optimal circuit boards should be used, ideally those that cannot be deformed. 4. Ceramic capacitors must always be placed a sufficient minimum distance from the edge of the circuit board. High bending forces may be exerted there when the panels are separated and during further processing of the board (such as when incorporating it into a housing). 5. Ceramic capacitors should always be placed parallel to the possible bending axis of the circuit board. 6. No screw connections should be used to fix the board or to connect several boards. Components should not be placed near screw holes. If screw connections are unavoidable, they must be cushioned (for instance by rubber pads). 21 10/06 Multilayer ceramic capacitors Cautions and warnings The following should be considered in the placement process 1. Ensure correct positioning of the ceramic capacitor on the solder pad. 2. Caution when using casting, injection-molded and molding compounds and cleaning agents, as these may damage the capacitor. 3. Support the circuit board and reduce the placement forces. 4. A board should not be straightened (manually) if it has been distorted by soldering. 5. Separate panels with a peripheral saw, or better with a milling head (no dicing or breaking). 6. Caution in the subsequent placement of heavy or leaded components (e.g. transformers or snap-in components): danger of bending and fracture. 7. When testing, transporting, packing or incorporating the board, avoid any deformation of the board not to damage the components. 8. Avoid the use of excessive force when plugging a connector into a device soldered onto the board. 9. Ceramic capacitors must be soldered only by the mode (reflow or wave soldering) permissible for them (see the chapter “Soldering directions”). 10. When soldering the most gentle solder profile feasible should be selected (heating time, peak temperature, cooling time) in order to avoid thermal stresses and damage. 11. Ensure the correct solder meniscus height and solder quantity. 12. Ensure correct dosing of the cement quantity. 13. Ceramic capacitors with an AgPd external termination are not suited for the lead-free solder process: they were developed only for conductive adhesion technology. This listing does not claim to be complete, but merely reflects the experience of EPCOS AG. 22 10/06 Multilayer ceramic capacitors Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 23 10/06