B39212B9451P810

SAW Components SAW Rx Filter WCDMA Band I / Band IV / Band X Series/Type: Ordering code: Date: Version: B9451 B39212B9451P810 April 07, 2010 2.0 © EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components SAW Filter Data sheet Application s Low-loss RF filter for mobile telephone B9451 2140.0 MHz WCDMA systems, receive path (RX) s Useable for antenna diversity systems for WCDMA band I, IV, X Impedance 50 Ω Unbalanced to unbalanced operation Very low insertion attenuation Very low amplitude ripple Very low Error Vector Magnitude (EVM) Very high Tx suppression for WCDMA band I, II, IV, V, X s Usable passband 60 MHz s s s s s s Package size 1.4 x 1.1 x 0.4 mm3 Approx. weight 0.003 g RoHS compatible Package for Surface Mount Technology (SMT) s Ni, gold-plated terminals s Electrostatic Sensitive Device (ESD) s Moisture Sensitive Level 3 s s s s 0,325 2 1 3 0,575 Features 0,25 bottom view 5 0,5 0,5 4 0,4 +/−0,05 side view 1,4 1,1 top view Pin configuration s1 s4 s 2,3,5 Input, unbalanced Output, unbalanced To be grounded 1 4 2,5 3 Please read cautions and warnings and important notes at the end of this document. 2 April 07, 2010 SAW Components SAW Filter Data sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: T = –30 ˚C to +85 ˚C ZS = 50 Ω +2.7nH (unbalanced) ZL = 50 Ω +1.9nH (unbalanced) min. Center frequency fC — typ. @ 25 ˚C 2140.0 max. — MHz B9451 2140.0 MHz Maximum insertion attenuation 2110.0 ... 2155.0MHz αmax 2110.0 ... 2170.0MHz αmax ... 2167.6MHz αWCDMA1) Amplitude ripple (p-p) ∆α 2110.0 ... 2155.0MHz @fCarrier 2112.4 2110.0 ... 2170.0MHz Error Vector Magnitude @fCarrier 2112.4 ... 2167.6MHz EVM2) Input VSWR 2110.0 ... 2155.0MHz 2110.0 Output VSWR 2110.0 2110.0 Attenuation 0.0 810.0 849.0 898.0 925.0 1710.0 1770.0 1850.0 2400.0 2484.0 4220.0 4340.0 1) 2) — — — — — — — — — — 1.9 1.9 2.1 0.5 0.5 1.1 1.6 1.6 1.6 1.6 2.7 2.7 2.7 1.2 1.2 1.9 2.0 2.0 2.0 2.0 dB dB dB dB dB % ... 2170.0MHz ... 2155.0MHz ... 2170.0MHz α ... ... ... ... ... ... ... ... ... ... ... ... 810.0MHz 849.0MHz 898.0MHz 925.0MHz 1710.0MHz 1770.0MHz 1850.0MHz 1980.0MHz 2484.0MHz 4220.0MHz 4340.0MHz 6000.0MHz 35 46 35 46 35 50 35 44 30 10 15 10 50 50 49 49 48 54 57 48 50 36 36 34 — — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB dB Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation below. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 3 April 07, 2010 SAW Components SAW Filter Data sheet Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by B9451 2140.0 MHz ∫∞ Sds 21 ( f ) HRRC ( f – f Carrier ) ∞ 2 df fCarrier according to 3GPP TS 25.101 (e.g. for UMTS-Passband, fCarrier ranges from 2112.4 MHz (lowest Rx channel) to 2167.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∫∞ HRRC ( f ) ∞ 2 df = 1 Maximum ratings Operable temperature range T Storage temperature range DC voltage ESD voltage Source Power 1) –30/+85 –40/+85 5 1001) 15 ˚C ˚C V V dBm machine model, 1 pulse cw signal @ 50˚C Tstg VDC VESD PS acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse. Please read cautions and warnings and important notes at the end of this document. 4 April 07, 2010 SAW Components SAW Filter Data sheet Transfer function B9451 2140.0 MHz Transfer function (wideband) Please read cautions and warnings and important notes at the end of this document. 5 April 07, 2010 SAW Components SAW Filter Data sheet Smith chart S11 function B9451 2140.0 MHz S22 function Please read cautions and warnings and important notes at the end of this document. 6 April 07, 2010 SAW Components SAW Filter Data sheet References Type Ordering code Marking and Package Packaging Date Codes S-Parameters B9451 B39212B9451P810 C61157-A8-A14 F61074-V8237-Z000 L_1126 B9451_NB.s2p B9451_WB.s2p see file header for port/pin assignment table Soldering profile RoHS compatible S_6001 defined as compatible with the following documents: B9451 2140.0 MHz "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY © EPCOS AG 2010. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 7 April 07, 2010 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, MiniBlue, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 2. 3. 4. 5. 6. 7. 8 April 07, 2010