B39331-B3662-Z510

SAW Components Data Sheet B3662 SAW Components Low-Loss Filter Data Sheet Features q IF filter for WLL q Ceramic SMD package q Low insertion attenuation B3662 333,0 MHz Ceramic package QCC12 Terminals q Gold plated Dimens. in mm, approx. weight 0,4 g Pin configuration 11 5 1 7 3, 4, 9, 10 2, 6, 8, 12 Input Output Input ground Output ground Ground Case ground Type B3662 Ordering code B39331-B3662-Z510 Marking and Package according to C61157-A7-A55 Packing according to F61074-V8026-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power TA Tstg VDC Ps -40 / +85 -45 / +85 0 10 ˚C ˚C V dBm 2 Jan 05, 2000 SAW Components Low-Loss Filter Data Sheet Characteristics Operating temperature: Terminating source impedance: Terminating load impedance: B3662 333,0 MHz TA = -45 ... +85 ˚C ZS = 50 Ω and matching network ZL = 50 Ω and matching network min. typ. 333,04 7,5 max. 333,12 MHz 9,0 dB Center frequency Minimum insertion attenuation Passband width αrel ≤ αrel ≤ αrel ≤ αrel ≤ αrel ≤ fC αmin 332,88 — 3,0 dB 20,0 dB 30,0 dB 40,0 dB 50,0 dB B3,0dB B20dB B30dB B40dB B50dB 0,62 — — — — 0,66 1,42 1,65 1,83 5,0 — 1,5 1,7 1,9 6,0 MHz MHz MHz MHz MHz Group delay ripple (p-p) ∆τ 332,72 ... 333,25 MHz 332,69 ... 333,31 MHz Triple Transit Suppression — — 30 400 400 31 500 650 — ns ns dB 3 Jan 05, 2000 SAW Components Low-Loss Filter Data Sheet Matching network (element values may depend on pcb layout) B3662 333,0 MHz Cp1 = 15 pF Ls2 = 18 nH Ls3 = 12 nH Cp4 = 18 pF 4 Jan 05, 2000 SAW Components Low-Loss Filter Data Sheet Transfer function: B3662 333,0 MHz Transfer function (pass band): 5 Jan 05, 2000 SAW Components Low-Loss Filter Data Sheet B3662 333,0 MHz Published by EPCOS AG Surface Acoustic Wave Components Division, OFW E NK P.O. Box 80 17 09, D-81617 München © EPCOS AG 1999. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, prices and delivery please contact the sales offices of EPCOS AG or the international representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. 6 Jan 05, 2000