B39781B7678A710

SAW Components SAW Duplexer LTE Band 13 Series/type: Date: Version: B7678 B39781B7678A710 January 24, 2011 2.1 © EPCOS AG 2011. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components SAW Duplexer DataSheet Application s Low-loss SAW duplexer for mobile telephone s s s s B7678 782.0 / 752.0 MHz LTE Band 13 systems Low insertion attenuation Low amplitude ripple Usable passband 10 MHz Very small size and low height Features s Package size 2.5 x 2.0 x 0.68 mm3 s RoHS compatible s Package for Surface Mount Technology 0.55 1 2 3 0.4 0.4 bottom view 4 9 0.3 0.68 (SMT) s Ni, gold-plated terminals s Electrostatic Sensitive Device (ESD) s Moisture Level Sensitivity 3 8 7 0.9 0.4 side view 4 6 5 2.5 7 6 5 2.0 top view 8 1 2 3 Pin configuration s s s s s 3 1 6 2,4,5 7,8,9 TX Input RX Output Antenna To be grounded To be grounded 1 6 3 2 2,7,8 1,3 4,5,9 5,7,8 4 6 Please read cautions and warnings and important notes at the end of this document. 2 January 24, 2011 SAW Components SAW Duplexer DataSheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: Characterisitcs TX - ANT Center frequency Maximum insertion attenuation 777.0 ... 787.0 Amplitude ripple (p-p) 777.0 ... Input VSWR (TX port) 777.0 ... 787.0 787.0 fC T = –30 ˚C to +85 ˚C ZANT= 50 Ω || 18 nH ZRX = 50 Ω ZTX = 50 Ω min. typ. @ 25 ˚C 782.0 max. B7678 782.0 / 752.0 MHz MHz MHz MHz MHz MHz α ∆α — — — — 1.9 0.5 1.5 1.5 2.4 1.3 2.0 2.0 dB dB Output VSWR (ANT port) 777.0 ... 787.0 Attenuation 10.0 150.0 350.0 728.0 746.0 758.0 808.0 869.0 1452.0 1554.0 1574.0 1670.0 1930.0 2110.0 2300.0 2361.0 3300.0 5150.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 150.0 350.0 650.0 746.0 756.0 768.0 818.0 894.0 1492.0 1574.0 1577.0 1675.0 1990.0 2170.0 2361.0 2690.0 3800.0 5850.0 α MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 40 35 30 35 47 30 30 35 35 35 45 35 35 35 30 30 20 5 60 47 42 50 57 32 43 45 49 50 51 51 50 48 40 41 24 12 — — — — — — — — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Please read cautions and warnings and important notes at the end of this document. 3 January 24, 2011 SAW Components SAW Duplexer DataSheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: Characterisitcs ANT - RX Center frequency Maximum insertion attenuation 746.0 ... 756.0 Amplitude ripple (p-p) 746.0 ... Input VSWR (ANT port) 746.0 ... Output VSWR (RX port) 746.0 ... Attenuation 10.0 150.0 350.0 698.0 716.0 777.0 788.0 824.0 1492.0 1554.0 1574.0 1710.0 1920.0 2200.0 2690.0 5150.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 150.0 350.0 650.0 716.0 722.0 787.0 818.0 849.0 1543.0 1574.0 1577.0 1770.0 1980.0 2690.0 3800.0 5850.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 756.0 756.0 756.0 fC T = –30 ˚C to +85 ˚C ZANT= 50 Ω || 18 nH ZRX = 50 Ω ZTX = 50 Ω min. typ. @ 25 ˚C 751.0 max. B7678 782.0 / 752.0 MHz MHz MHz MHz MHz MHz α ∆α — — — — 2.1 0.5 1.6 1.6 2.6 1.2 2.0 2.0 dB dB α 40 35 30 35 35 51 35 30 32 35 35 35 35 35 25 5 60 47 39 40 43 59 42 40 38 38 38 39 39 38 30 11 — — — — — — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Please read cautions and warnings and important notes at the end of this document. 4 January 24, 2011 SAW Components SAW Duplexer DataSheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω || 18 nH ZRX = 50 Ω ZTX = 50 Ω B7678 782.0 / 752.0 MHz Characterisitcs TX - RX Isolation 746.0 777.0 ... ... 756.0 787.0 MHz MHz α min. typ. @ 25 ˚C 59 59 max. 48 52 — — dB dB Maximum ratings Storage temperature range DC voltage ESD voltage Input power at Tx Port 779.5 ... 784.5 MHz Elsewhere 1) Tstg VDC VESD PIN PIN –40/+85 5 1001) 28 10 ˚C V V machine model, 1 pulse dBm } LTE uplink signal 55 ˚C, 50000 H acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse. Please read cautions and warnings and important notes at the end of this document. 5 January 24, 2011 SAW Components SAW Duplexer DataSheet Frequency Response TX-ANT B7678 782.0 / 752.0 MHz Frequency Response TX-ANT Please read cautions and warnings and important notes at the end of this document. 6 January 24, 2011 SAW Components SAW Duplexer DataSheet Frequency Response ANT-RX B7678 782.0 / 752.0 MHz Frequency Response ANT-RX Please read cautions and warnings and important notes at the end of this document. 7 January 24, 2011 SAW Components SAW Duplexer DataSheet ISOLATION TX-RX B7678 782.0 / 752.0 MHz ISOLATION TX-RX Please read cautions and warnings and important notes at the end of this document. 8 January 24, 2011 SAW Components SAW Duplexer DataSheet S11 VSWR (TX) B7678 782.0 / 752.0 MHz S22 VSWR (ANT) S33 VSWR (RX) Please read cautions and warnings and important notes at the end of this document. 9 January 24, 2011 SAW Components SAW Duplexer DataSheet B7678 782.0 / 752.0 MHz References Type Ordering code Marking and package Packaging Date codes B7678 B39781B7678A710 C61157-A3-A61 F61074-V8153-Z000 L_1126 B7678_NB.s3p S-parameters B7678_WB.s3p See file header for port/pin assignment table Soldering profile RoHS compatible S_6001 defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY © EPCOS AG 2011. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 10 January 24, 2011 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 11 January 24, 2011 2. 3. 4. 5. 6. 7.