0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
B43004

B43004

  • 厂商:

    EPCOS

  • 封装:

  • 描述:

    B43004 - Aluminum electrolytic capacitors - EPCOS

  • 数据手册
  • 价格&库存
B43004 数据手册
Aluminum electrolytic capacitors Alu-X product lines Single-ended capacitors Series/Type: Data Sheet Date: B41004, B43004 August 2008 © EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the information contained therein without EPCOS’ prior express consent is prohibited. Long-life grade capacitors Applications Single-ended capacitors Low impedance – 85 °C Single-ended capacitors Low impedance – 85 °C B41004, B43004 B41004, B43004 ■ For low impedance applications ■ Semi-professional to professional application range ■ For filtering, coupling and pulse circuits Features ■ Miniaturized dimensions ■ RoHS-compatible ■ Load life of 2000 hours at 85 °C Construction ■ ■ ■ ■ ■ Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulation sleeve Case with safety vent from diameter 8 mm Delivery mode ■ ■ ■ ■ Bulk Taped, Ammo pack Cut Kinked Please read Cautions and warnings and Important notes at the end of this document. 2 08/08 Single-ended capacitors Low impedance – 85 °C Specifications and characteristics in brief Rated voltage VR 6.3 … 450 V DC Operating temperature VR ≤ 100 V DC: –40 °C … +85 °C VR ≥ 160 V DC: –25 °C … +85 °C range Rated capacitance CR 0.1 … 15000 µF (20 °C, 120 Hz) Capacitance tolerance ± 20% Load life (85 °C, VR, IAC,R) M 2000 h Requirements: ∆C/C ≤ ± 20% of initial value tan δ ≤ 2 times initial specified limit Ileak ≤ initial specified limit B41004, B43004 Dissipation factor tan δ (20 °C, 120 Hz) Leakage current Ileak (20 °C, after 5 minutes) Low temperature stability (impedance ratio) (120 Hz) For capacitance higher than 1000 µF add 0.02 for every increase of 1000 µF 6.3 VR (V DC) 10 16 0.18 25 35 50 63 100 160 ... 350 400 450 250 0.15 0.20 0.20 0.24 tan δ 0.24 0.20 0.16 0.14 0.12 0.12 0.10 CR VR I leak ≤ 0.03 µA ⋅ ⎛ ------- ⋅ ------ ⎞ ⎝ µF V ⎠ VR (V DC) Z ( – 25 °C ) -------------------------Z ( +20 °C ) Z ( – 40 °C ) -------------------------Z ( +20 °C ) 6.3 ... 16 – 5 25 ... 100 – 4 160 4 – 250 ... 450 7 – Shelf life After storage for 1000 h at 85 °C, the capacitors shall meet the requirement of load life test after reforming process. After test: VR to be applied for 30 minutes, 24 to 48 hours before measurement. Frequency VR CR 10 ... 68 µF 330 ... 1000 µF 2200 ... 15000 µF Frequency multiplier for rated ripple current 50 Hz – – – 0.8 0.8 +70 °C 1.27 120 Hz 0.4 0.5 0.7 0.8 0.9 1 1 1 kHz 10 kHz 0.7 0.8 0.9 0.9 1 1.3 1.3 0.8 0.9 0.9 1 1 1.4 1.4 +85 °C 1.00 100 kHz 1 1 1 1 1 1.6 1.5 6.3 ... 100 V 0.1 ... 6.8 µF – 100 ... 200 µF – 160 ... 400 V 0.47 ... 330 450 V Temperature multiplier for rated ripple current +50 °C 1.50 1.0 ... 33 Please read Cautions and warnings and Important notes at the end of this document. 3 08/08 Single-ended capacitors Low impedance – 85 °C Dimensional drawing B41004, B43004 d l + 15 min. 5 min. KAL1080-C-E Minus pole marking a Safety vent Safety vent for diameter ≥ 8 mm. Case dimensions d×l mm 5 8 10 10 10 × 11 × 11.5 × 12.5 × 16 × 20 6.3 × 11 dmax × Imax mm 5.5 × 12.5 6.8 × 12.5 8.5 × 13.0 11 11 11 × 14.0 × 17.5 × 21.5 a mm 2.0 ± 0.5 2.5 ± 0.5 3.5 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 b mm 0.5 ± 0.1 0.5 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 12.5 × 20 12.5 × 25 16 16 16 18 18 × 25 × 31.5 × 35.5 × 35.5 × 40 13.5 × 22.0 13.5 × 27.0 17 17 17 19 19 × 27.0 × 33.5 × 37.5 × 37.5 × 42.0 Please read Cautions and warnings and Important notes at the end of this document. 4 øb 08/08 Single-ended capacitors Low impedance – 85 °C Overview of available types B41004 VR (V DC) CR (µF) 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 15000 5 5 5 5 × 11 × 11 × 11 × 11 5 5 5 5 5 8 8 10 10 10 10 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 12.5 × 12.5 × 16 × 20 5 5 5 5 5 × 11 × 11 × 11 × 11 × 11 6.3 10 16 B41004, B43004 25 Case dimensions d × l (mm) 5 5 5 5 5 5 5 8 8 10 10 10 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 12.5 × 16 × 16 6.3 × 11 6.3 × 11 8 8 10 10 10 10 × 11.5 × 11.5 × 12.5 × 12.5 × 16 × 20 6.3 × 11 6.3 × 11 6.3 × 11 8 8 10 10 10 × 11.5 × 11.5 × 12.5 × 16 × 20 6.3 × 11 12.5 × 20 12.5 × 20 16 16 16 16 × 25 × 25 × 31.5 × 35.5 12.5 × 20 12.5 × 25 16 16 18 × 25 × 31.5 × 35.5 12.5 × 20 12.5 × 25 16 16 16 18 × 25 × 31.5 × 35.5 × 35.5 12.5 × 20 12.5 × 25 16 16 18 × 25 × 31.5 × 35.5 Please read Cautions and warnings and Important notes at the end of this document. 5 08/08 Single-ended capacitors Low impedance – 85 °C Overview of available types B41004 VR (V DC) CR (µF) 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 5 5 5 5 5 5 5 5 8 8 10 10 10 10 16 16 16 18 18 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 12.5 × 16 × 16 × 20 × 25 × 31.5 × 31.5 × 35.5 × 40 5 5 5 5 5 5 5 5 5 5 5 5 5 5 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 5 5 5 5 5 5 5 5 5 5 5 5 5 8 8 8 10 10 10 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 11.5 × 12.5 × 16 × 20 35 50 63 B41004, B43004 100 Case dimensions d × l (mm) 5 5 5 5 5 5 5 5 5 5 5 8 10 10 10 10 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 12.5 × 12.5 × 16 × 16 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 11 8 10 10 10 10 × 11.5 × 12.5 × 12.5 × 16 × 20 6.3 × 11 12.5 × 20 12.5 × 20 16 16 16 16 × 25 × 25 × 31.5 × 35.5 12.5 × 20 12.5 × 25 16 16 16 × 25 × 31.5 × 35.5 12.5 × 20 12.5 × 25 16 16 16 18 × 25 × 31.5 × 35.5 × 35.5 12.5 × 25 Please read Cautions and warnings and Important notes at the end of this document. 6 08/08 Single-ended capacitors Low impedance – 85 °C Overview of available types B43004 VR (V DC) CR (µF) 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 11 8 8 10 10 10 10 × 11.5 × 11.5 × 12.5 × 12.5 × 16 × 20 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 11 8 10 10 10 10 × 11.5 × 12.5 × 16 × 16 × 20 160 Case dimensions d × l (mm) 200 B41004, B43004 250 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 11 8 10 10 10 10 × 11.5 × 12.5 × 12.5 × 16 × 20 12.5 × 20 12.5 × 25 16 16 16 18 × 25 × 25 × 31.5 × 35.5 12.5 × 20 12.5 × 25 12.5 × 25 16 16 18 18 × 31.5 × 31.5 × 35.5 × 40 12.5 × 20 12.5 × 25 16 16 16 18 18 × 25 × 31.5 × 35.5 × 35.5 × 40 Please read Cautions and warnings and Important notes at the end of this document. 7 08/08 Single-ended capacitors Low impedance – 85 °C Overview of available types B43004 VR (V DC) CR (µF) 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 6.3 × 11 8 8 10 10 10 10 × 11.5 × 11.5 × 12.5 × 12.5 × 16 × 20 8 10 10 10 10 × 11.5 × 12.5 × 12.5 × 16 × 20 350 Case dimensions d × l (mm) 400 B41004, B43004 450 10 10 10 10 × 12.5 × 16 × 16 × 20 12.5 × 20 12.5 × 25 12.5 × 25 16 16 18 × 31.5 × 31.5 × 35.5 12.5 × 20 12.5 × 20 16 16 16 18 × 25 × 25 × 31.5 × 35.5 12.5 × 25 12.5 × 25 16 16 16 18 × 25 × 31.5 × 31.5 × 35.5 Please read Cautions and warnings and Important notes at the end of this document. 8 08/08 Single-ended capacitors Low impedance – 85 °C Technical data and ordering codes B41004 VR V DC 6.3 CR 120 Hz 20 °C µF 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 15000 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 Case dimensions d×l mm 5 5 5 5 6.3 6.3 8 8 10 10 10 12.5 12.5 16 16 16 18 5 5 5 5 5 6.3 8 8 10 10 10 10 12.5 12.5 16 16 18 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 12.5 × 16 × 20 × 20 × 25 × 25 × 31.5 × 35.5 × 35.5 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 12.5 × 12.5 × 16 × 20 × 20 × 25 × 25 × 31.5 × 35.5 Z 100 kHz 20 °C Ω 3.000 1.800 1.560 1.440 1.200 1.044 0.696 0.468 0.420 0.276 0.216 0.114 0.108 0.096 0.073 0.067 0.054 3.000 2.280 1.800 1.680 1.440 0.960 0.696 0.564 0.468 0.360 0.216 0.180 0.120 0.096 0.082 0.067 0.054 IAC,R 100 kHz 85 °C mA 70 85 105 130 170 200 280 326 450 540 800 990 1150 1550 1900 2250 2850 65 75 89 107 130 170 240 280 360 450 650 900 1050 1350 1800 2200 2700 B41004, B43004 Ordering code (composition see below) B41004A2336M*** B41004A2476M*** B41004A2686M*** B41004A2107M*** B41004A2157M*** B41004A2227M*** B41004A2337M*** B41004A2477M*** B41004A2687M*** B41004A2108M*** B41004A2158M*** B41004A2228M*** B41004A2338M*** B41004A2478M*** B41004A2688M*** B41004A2109M*** B41004A2159M*** B41004A3226M*** B41004A3336M*** B41004A3476M*** B41004A3686M*** B41004A3107M*** B41004A3157M*** B41004A3227M*** B41004A3337M*** B41004A3477M*** B41004A3687M*** B41004A3108M*** B41004A3158M*** B41004A3228M*** B41004A3338M*** B41004A3478M*** B41004A3688M*** B41004A3109M*** 10 *** = Version 000 = for 001 = for 002 = for 016 = for 007 = for 006 = for 008 = for standard leads, bulk kinked leads cut leads, bulk taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, lead lead lead lead spacing spacing spacing spacing a a a a = = = = 2.0 2.5 3.5 5.0 mm mm mm mm Please read Cautions and warnings and Important notes at the end of this document. 9 08/08 Single-ended capacitors Low impedance – 85 °C Technical data and ordering codes B41004 VR CR 120 Hz 20 °C V DC µF 16 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 Case dimensions d×l mm 5 5 5 5 5 6.3 6.3 8 8 10 10 10 10 12.5 12.5 16 16 18 5 5 5 5 5 5 5 6.3 8 8 10 10 10 12.5 12.5 16 16 16 16 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 12.5 × 12.5 × 16 × 20 × 20 × 25 × 25 × 31.5 × 35.5 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 12.5 × 16 × 16 × 20 × 20 × 25 × 25 × 31.5 × 35.5 Z 100 kHz 20 °C Ω 3 2.64 2.28 1.8 1.68 1.2 0.84 0.6 0.564 0.468 0.3 0.204 0.144 0.12 0.096 0.072 0.067 0.054 3.6 3.24 3 2.64 2.28 1.92 1.44 0.96 0.696 0.6 0.564 0.372 0.264 0.168 0.12 0.096 0.084 0.067 0.054 IAC,R 100 kHz 85 °C mA 55 66 80 96 116 130 176 220 300 350 496 616 850 1050 1300 1650 2100 2500 40 48 60 69 87 110 116 160 190 270 340 520 625 850 1050 1230 1550 2100 2450 B41004, B43004 Ordering code (composition see below) B41004A4106M*** B41004A4156M*** B41004A4226M*** B41004A4336M*** B41004A4476M*** B41004A4686M*** B41004A4107M*** B41004A4157M*** B41004A4227M*** B41004A4337M*** B41004A4477M*** B41004A4687M*** B41004A4108M*** B41004A4158M*** B41004A4228M*** B41004A4338M*** B41004A4478M*** B41004A4688M*** B41004A5475M*** B41004A5685M*** B41004A5106M*** B41004A5156M*** B41004A5226M*** B41004A5336M*** B41004A5476M*** B41004A5686M*** B41004A5107M*** B41004A5157M*** B41004A5227M*** B41004A5337M*** B41004A5477M*** B41004A5687M*** B41004A5108M*** B41004A5158M*** B41004A5228M*** B41004A5338M*** B41004A5478M*** 25 *** = Version 000 = for 001 = for 002 = for 016 = for 007 = for 006 = for 008 = for standard leads, bulk kinked leads, bulk cut leads, bulk taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, lead lead lead lead spacing spacing spacing spacing a a a a = = = = 2.0 2.5 3.5 5.0 mm mm mm mm Please read Cautions and warnings and Important notes at the end of this document. 10 08/08 Single-ended capacitors Low impedance – 85 °C Technical data and ordering codes B41004 VR V DC 35 CR 120 Hz 20 °C µF 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 Case dimensions d×l mm 5 5 5 5 5 5 5 5 6.3 8 8 10 10 10 10 12.5 16 16 16 18 18 5 5 5 5 5 5 5 5 5 5 5 5 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 12.5 × 16 × 16 × 20 × 25 × 25 × 31.5 × 31.5 × 35.5 × 40 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 Z 100 kHz 20 °C Ω 4 3.5 3 2.64 2.28 2.04 1.8 1.44 0.828 0.6 0.468 0.43 0.4 0.324 0.228 0.156 0.108 0.096 0.084 0.054 0.045 24 20 18 15.6 12 8.4 7.2 6.24 5.88 5.4 4.8 3.84 IAC,R 100 kHz 85 °C mA 26 32 50 60 70 88 110 130 160 210 320 390 530 650 850 1050 1230 1560 2100 2460 2500 10 11 15 19 25 30 35 40 45 55 76 86 B41004, B43004 Ordering code (composition see below) B41004A7225M*** B41004A7335M*** B41004A7475M*** B41004A7685M*** B41004A7106M*** B41004A7156M*** B41004A7226M*** B41004A7336M*** B41004A7476M*** B41004A7686M*** B41004A7107M*** B41004A7157M*** B41004A7227M*** B41004A7337M*** B41004A7477M*** B41004A7687M*** B41004A7108M*** B41004A7158M*** B41004A7228M*** B41004A7338M*** B41004A7478M*** B41004A6104M*** B41004A6154M*** B41004A6224M*** B41004A6334M*** B41004A6474M*** B41004A6684M*** B41004A6105M*** B41004A6155M*** B41004A6225M*** B41004A6335M*** B41004A6475M*** B41004A6685M*** 50 *** = Version 000 = for 001 = for 002 = for 016 = for 007 = for 006 = for 008 = for standard leads, bulk kinked leads, bulk cut leads, bulk taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, lead lead lead lead spacing spacing spacing spacing a a a a = = = = 2.0 2.5 3.5 5.0 mm mm mm mm Please read Cautions and warnings and Important notes at the end of this document. 11 08/08 Single-ended capacitors Low impedance – 85 °C Technical data and ordering codes B41004 VR V DC 50 CR 120 Hz 20 °C µF 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Case dimensions d×l mm 5 5 6.3 6.3 8 10 10 10 10 12.5 12.5 16 16 16 18 5 5 5 5 5 5 5 5 5 5 5 5 5 6.3 8 8 8 10 10 × 11 × 11 × 11 × 11 × 11.5 × 12.5 × 12.5 × 16 × 20 × 20 × 25 × 25 × 31.5 × 35.5 × 35.5 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 11.5 × 12.5 × 16 Z 100 kHz 20 °C Ω 3.24 2.64 2.28 1.32 1.08 0.84 0.6 0.56 0.408 0.276 0.18 0.132 0.096 0.082 0.06 24 20 18 15.6 12 8.4 7.2 6.24 5.88 5.4 6.96 5.4 4.32 3.36 2.52 2.04 1.44 1.08 0.816 IAC,R 100 kHz 85 °C mA 95 105 135 186 210 320 420 530 620 730 980 1160 1560 1820 2300 10 11 15 19 25 30 35 40 45 55 76 88 96 115 136 190 310 356 440 B41004, B43004 Ordering code (composition see below) B41004A6106M*** B41004A6156M*** B41004A6226M*** B41004A6336M*** B41004A6476M*** B41004A6686M*** B41004A6107M*** B41004A6157M*** B41004A6227M*** B41004A6337M*** B41004A6477M*** B41004A6687M*** B41004A6108M*** B41004A6158M*** B41004A6228M*** B41004A8104M*** B41004A8154M*** B41004A8224M*** B41004A8334M*** B41004A8474M*** B41004A8684M*** B41004A8105M*** B41004A8155M*** B41004A8225M*** B41004A8335M*** B41004A8475M*** B41004A8685M*** B41004A8106M*** B41004A8156M*** B41004A8226M*** B41004A8336M*** B41004A8476M*** B41004A8686M*** B41004A8107M*** 63 *** = Version 000 = for 001 = for 002 = for 016 = for 007 = for 006 = for 008 = for standard leads, bulk kinked leads, bulk cut leads, bulk taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, lead lead lead lead spacing spacing spacing spacing a a a a = = = = 2.0 2.5 3.5 5.0 mm mm mm mm Please read Cautions and warnings and Important notes at the end of this document. 12 08/08 Single-ended capacitors Low impedance – 85 °C Technical data and ordering codes B41004 VR V DC 63 CR 120 Hz 20 °C µF 150 220 330 470 680 1000 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 Case dimensions d×l mm 10 12.5 12.5 16 16 16 5 5 5 5 5 5 5 5 5 5 5 6.3 8 10 10 10 10 12.5 12.5 16 16 16 16 × 20 × 20 × 25 × 25 × 31.5 × 35.5 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11 × 11.5 × 12.5 × 12.5 × 16 × 16 × 20 × 20 × 25 × 25 × 31.5 × 35.5 Z 100 kHz 20 °C Ω 0.522 0.384 0.264 0.192 0.144 0.117 26 24 22 20 18 15.6 14.4 13.2 12 8.64 7.56 5.4 3.96 3.36 1.68 1.128 0.816 0.48 0.336 0.264 0.192 0.156 0.144 IAC,R 100 kHz 85 °C mA 540 630 740 1000 1200 1500 10 11 15 20 25 30 35 45 55 65 75 90 120 150 190 310 350 440 600 690 1050 1380 1400 B41004, B43004 Ordering code (composition see below) B41004A8157M*** B41004A8227M*** B41004A8337M*** B41004A8477M*** B41004A8687M*** B41004A8108M*** B41004A9104M*** B41004A9154M*** B41004A9224M*** B41004A9334M*** B41004A9474M*** B41004A9684M*** B41004A9105M*** B41004A9155M*** B41004A9225M*** B41004A9335M*** B41004A9475M*** B41004A9685M*** B41004A9106M*** B41004A9156M*** B41004A9226M*** B41004A9336M*** B41004A9476M*** B41004A9686M*** B41004A9107M*** B41004A9157M*** B41004A9227M*** B41004A9337M*** B41004A9477M*** 100 *** = Version 000 = for 001 = for 002 = for 016 = for 007 = for 006 = for 008 = for standard leads, bulk kinked leads, bulk cut leads, bulk taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, lead lead lead lead spacing spacing spacing spacing a a a a = = = = 2.0 2.5 3.5 5.0 mm mm mm mm Please read Cautions and warnings and Important notes at the end of this document. 13 08/08 Single-ended capacitors Low impedance – 85 °C Technical data and ordering codes B43004 VR V DC 160 CR 120 Hz 20 °C µF 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 Case dimensions d×l mm 6.3 6.3 6.3 6.3 6.3 8 8 10 10 10 10 12.5 12.5 16 16 16 18 18 6.3 6.3 6.3 6.3 6.3 8 10 10 10 10 12.5 12.5 12.5 16 16 18 18 × 11 × 11 × 11 × 11 × 11 × 11.5 × 11.5 × 12.5 × 12.5 × 16 × 20 × 20 × 25 × 25 × 31.5 × 35.5 × 35.5 × 40 × 11 × 11 × 11 × 11 × 11 × 11.5 × 12.5 × 16 × 16 × 20 × 20 × 25 × 25 × 31.5 × 31.5 × 35.5 × 40 IAC,R 100 kHz 85 °C mA 16 20 24 30 37 45 55 60 85 120 160 210 270 320 430 550 790 950 16 20 24 30 37 45 60 80 100 130 170 230 270 355 450 640 800 B41004, B43004 Ordering code (composition see below) B43004A1474M*** B43004A1684M*** B43004A1105M*** B43004A1155M*** B43004A1225M*** B43004A1335M*** B43004A1475M*** B43004A1685M*** B43004A1106M*** B43004A1156M*** B43004A1226M*** B43004A1336M*** B43004A1476M*** B43004A1686M*** B43004A1107M*** B43004A1157M*** B43004A1227M*** B43004A1337M*** B43004A2474M*** B43004A2684M*** B43004A2105M*** B43004A2155M*** B43004A2225M*** B43004A2335M*** B43004A2475M*** B43004A2685M*** B43004A2106M*** B43004A2156M*** B43004A2226M*** B43004A2336M*** B43004A2476M*** B43004A2686M*** B43004A2107M*** B43004A2157M*** B43004A2227M*** 200 *** = Version 000 = for 001 = for 002 = for 016 = for 007 = for 006 = for 008 = for standard leads, bulk kinked leads, bulk cut leads, bulk taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, lead lead lead lead spacing spacing spacing spacing a a a a = = = = 2.0 2.5 3.5 5.0 mm mm mm mm Please read Cautions and warnings and Important notes at the end of this document. 14 08/08 Single-ended capacitors Low impedance – 85 °C Technical data and ordering codes B43004 VR CR 120 Hz 20 °C V DC µF 250 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 Case dimensions d×l mm 6.3 6.3 6.3 6.3 8 10 10 10 10 12.5 12.5 16 16 16 18 6.3 8 8 10 10 10 10 12.5 12.5 16 16 16 18 × 11 × 11 × 11 × 11 × 11.5 × 12.5 × 12.5 × 16 × 20 × 20 × 25 × 25 × 25 × 31.5 × 35.5 × 11 × 11.5 × 11.5 × 12.5 × 12.5 × 16 × 20 × 20 × 20 × 25 × 25 × 31.5 × 35.5 IAC,R 100 kHz 85 °C mA 16 20 24 30 39 50 60 70 110 140 190 230 260 340 480 13 20 24 30 40 55 60 98 120 150 190 280 300 B41004, B43004 Ordering code (composition see below) B43004F2474M*** B43004F2684M*** B43004F2105M*** B43004F2155M*** B43004F2225M*** B43004F2335M*** B43004F2475M*** B43004F2685M*** B43004F2106M*** B43004F2156M*** B43004F2226M*** B43004F2336M*** B43004F2476M*** B43004F2686M*** B43004F2107M*** B43004A4474M*** B43004A4684M*** B43004A4105M*** B43004A4155M*** B43004A4225M*** B43004A4335M*** B43004A4475M*** B43004A4685M*** B43004A4106M*** B43004A4156M*** B43004A4226M*** B43004A4336M*** B43004A4476M*** 350 *** = Version 000 = for 001 = for 002 = for 016 = for 007 = for 006 = for 008 = for standard leads, bulk kinked leads, bulk cut leads, bulk taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, lead lead lead lead spacing spacing spacing spacing a a a a = = = = 2.0 2.5 3.5 5.0 mm mm mm mm Please read Cautions and warnings and Important notes at the end of this document. 15 08/08 Single-ended capacitors Low impedance – 85 °C Technical data and ordering codes B43004 VR CR 120 Hz 20 °C V DC µF 400 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 Case dimensions d×l mm 8 10 10 10 10 12.5 12.5 16 16 16 18 10 10 10 10 12.5 12.5 12.5 16 16 18 × 11.5 × 12.5 × 12.5 × 16 × 20 × 25 × 25 × 25 × 31.5 × 31.5 × 35.5 × 12.5 × 16 × 16 × 20 × 20 × 25 × 25 × 31.5 × 31.5 × 35.5 IAC,R 100 kHz 85 °C mA 25 35 43 58 70 100 120 130 200 240 320 20 30 38 45 60 82 105 150 160 235 B41004, B43004 Ordering code (composition see below) B43004A9105M*** B43004A9155M*** B43004A9225M*** B43004A9335M*** B43004A9475M*** B43004A9685M*** B43004A9106M*** B43004A9156M*** B43004A9226M*** B43004A9336M*** B43004A9476M*** B43004A5105M*** B43004A5155M*** B43004A5225M*** B43004A5335M*** B43004A5475M*** B43004A5685M*** B43004A5106M*** B43004A5156M*** B43004A5226M*** B43004A5336M*** 450 *** = Version 000 = for 001 = for 002 = for 016 = for 007 = for 006 = for 008 = for standard leads, bulk kinked leads, bulk cut leads, bulk taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, taped leads, Ammo pack, lead lead lead lead spacing spacing spacing spacing a a a a = = = = 2.0 2.5 3.5 5.0 mm mm mm mm Please read Cautions and warnings and Important notes at the end of this document. 16 08/08 Single-ended Single-ended capacitors Taping, packing and lead configurations Taping, packing and lead configurations of single-ended capacitors B41004, B43004 Single-ended capacitors are available taped in Ammo pack from diameter 4 to 10 mm as follows: Lead spacing 2.0 mm (∅ d = 4 ... 5 mm) Last 3 digits of ordering code: 016 ød P P0 ∆h ∆h H H0 W2 D0 1 max. W1 View B W W0 Base tape Adhesive tape F P1 B l1 t KAL1138-D-E Dimensions in mm ∅d F –0.2 H 18.5 W 18.0 W0 7.0 min. W1 9.0 ± 0.5 W2 3.0 max. P 12.7 ± 1.0 P0 12.7 ± 0.3 P1 5.10 ± 0.7 l1 1.0 max. t 0.7 ± 0.2 ∆h 1 ± 1.0 D0 4.0 ± 0.2 4 ... 5 2.0 ± 0.75 ± 0.5 Please read Cautions and warnings and Important notes at the end of this document. 17 08/08 Single-ended capacitors Taping, packing and lead configurations Lead spacing 2.5 mm (∅ d = 4 ... 6.3 mm) Last 3 digits of ordering code: 007 ød P P0 ∆h ∆h B41004, B43004 H H0 W2 1 max. W0 W1 View B W Base tape Adhesive tape P1 B l1 F D0 t KAL1074-3-E Dimensions in mm ∅d 4 ... 6.3 F 2.5 H 18.5 H0 W W0 W1 9.0 W2 3.0 P P0 P1 l1 t 0.7 ∆h 0 D0 4.0 16.0 18.0 7.0 12.7 12.7 5.10 1.0 Tolerance –0.2 ± 0.75 ± 0.5 ± 0.5 min. ± 0.5 max. ± 1.0 ± 0.3 ± 0.7 max. ± 0.2 ± 1.0 ± 0.2 Lead spacing 3.5 mm (∅ d = 8 mm) Last 3 digits of ordering code: 006 ød P P0 ∆h ∆h H H0 W2 D0 1 max. W1 View B W W0 Base tape Adhesive tape F P1 B l1 t KAL1138-D-E Dimensions in mm ∅d 8 F 3.5 H 18.5 W W0 W1 9.0 W2 3.0 P P0 P1 l1 t 0.7 ∆h 1 D0 4.0 18.0 10 12.7 12.7 5.10 1.0 Tolerance ± 0.5 ± 0.75 ± 0.5 min. ± 0.5 max. ± 1.0 ± 0.3 ± 0.7 max. ± 0.2 max. ± 0.2 Please read Cautions and warnings and Important notes at the end of this document. 18 08/08 Single-ended capacitors Taping, packing and lead configurations Lead spacing 5.0 mm (∅ d = 4 ... 8 mm) Last 3 digits of ordering code: 008 ød P P0 ∆h ∆h B41004, B43004 H H0 W2 1 max. W0 W1 View B W Base tape Adhesive tape P1 B l1 F D0 t KAL1075-B-E Lead spacing 5.0 mm (∅ d = 10 mm) Last 3 digits of ordering code: 008 ød P P0 ∆h ∆h H W2 1 max. W0 W1 View B W Base tape Adhesive tape P1 B l1 F D0 Dimensions in mm ∅d 4 ... 6.3 8 10 Tolerance F 5.0 5.0 5.0 H 18.5 18.5 18.5 H0 16 16 – W W0 W1 9.0 9.0 W2 3.0 3.0 3.0 P P0 P1 L1 t 0.6 0.6 0.6 ∆h 2.0 2.0 2.0 D0 4.0 4.0 4.0 18.0 7.0 18.0 10 12.7 12.7 3.85 1.0 12.7 12.7 3.85 1.0 12.7 12.7 3.85 1.0 18.0 12.5 9.0 +0.6 ± 0.75 ± 0.5 +1.0 +1.0 ± 0.5 max. ± 0.5 ± 0.3 ± 0.7 max. +0.3 max. ± 0.2 –0.2 –0.5 –0 –0.2 Taping is available up to dimensions d × l = 10 × 20 mm. For ∅ 12.5, 16 and 18 mm taping is not available. Please read Cautions and warnings and Important notes at the end of this document. 19 08/08 t KAL1076-J-E Single-ended capacitors Taping, packing and lead configurations Kinked or cut leads B41004, B43004 Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available on request. Kinked leads Last 3 digits of ordering code: 001 l 2.1±0.1 3.2±0.1 KAL1137-5 l ød 4.5±0.5 KAL1084-A Case size d × l (mm) 4×7 5×7 5 × 11 6.3 × 7 6.3 × 11 6.3 × 15 8×7 8 × 11.5 8 × 15 8 × 20 10 × 12.5 10 × 16 10 × 20 10 × 25 10 × 31.5 a 1.2±0.1 ød a (mm) 1.5 2.0 2.0 2.5 2.5 2.5 3.5 3.5 3.5 3.5 5.0 5.0 5.0 5.0 5.0 Case size d × l (mm) a (mm) 12.5 × 16 12.5 × 20 12.5 × 25 12.5 × 31.5 12.5 × 35.5 12.5 × 40 16 × 20 16 × 25 16 × 31.5 16 × 35.5 16 × 40 18 × 20 18 × 25 18 × 31.5 18 × 35.5 18 × 40 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Please read Cautions and warnings and Important notes at the end of this document. 20 08/08 Single-ended capacitors Taping, packing and lead configurations Cut leads Last 3 digits of ordering code: 002 l B41004, B43004 ød 4.5±0.5 KAL1086-R Case size d × l (mm) 4×7 5×7 5 × 11 6.3 × 7 6.3 × 11 6.3 × 15 8×7 8 × 11.5 8 × 15 8 × 20 10 × 12.5 10 × 16 10 × 20 10 × 25 10 × 31.5 a a (mm) 1.5 2.0 2.0 2.5 2.5 2.5 3.5 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 Case size d × l (mm) a (mm) 12.5 × 16 12.5 × 20 12.5 × 25 12.5 × 31.5 12.5 × 35.5 12.5 × 40 16 × 20 16 × 25 16 × 31.5 16 × 35.5 16 × 40 18 × 20 18 × 25 18 × 31.5 18 × 35.5 18 × 40 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Please read Cautions and warnings and Important notes at the end of this document. 21 08/08 Cautions and warnings General Also see “Important notes” on page 24. 1 Aluminum electrolytic capacitors have a bi-polar structure. This is marked on the body of the capacitor. A capacitor must not be mounted with reversed polarity. The application of an AC or reverse voltage may cause a short circuit or damage the capacitor. Bi-polar capacitors must not be used in AC applications, where the polarity may be reversed in the circuits or is unknown. The DC voltage applied to the capacitor terminal must not exceed its rated operating voltage, as this will result in a rapid increase of the leakage current and may damage the capacitor. It is recommended to operate the capacitor at 70–80% of its rated voltage to optimize its service life. The ripple current applied to the capacitor must be within the permitted range. An excessive ripple current leads to impaired electrical properties and may damage the capacitor. Note that the sum of the peak values of the ripple voltage and the DC operating voltage must not exceed the rated DC voltage. Capacitors must be used within their permitted range of operating temperature. Operation at room temperature optimizes their service life. Capacitors with case diameter ≥ 8 mm are equipped with a safety vent. In capacitors fitted with a lead or soldering lug, the safety vent is usually located at the base of the case. It needs sufficient space around it to operate optimally. The following dimensions are recommended: for case diameter d = 8 to 16 mm, more than 2 mm; for d =18 to 35 mm, more than 3 mm; and for d = 42 mm or more, more than 5 mm. Capacitors should not be mounted with the safety vent face down on the board. Do not locate any wire or copper trace near the safety vent. Do not reverse the voltage, as this may result in excess pressure and the leakage of electrolyte. Gas is released through the safety vent when the pressure inside the capacitor is too high. A gaseous liquid around the safety vent does not indicate a leakage of electrolyte. The capacitor should be stored under conditions of normal temperature and in a non-acid, non-alkali environment of normal humidity. Exposure to high temperatures, for example under direct sunlight, will reduce its operating life. If the capacitor is stored in an environment containing acids or alkalis, the solderability of the leads may be affected. The leakage current of an aluminum electrolytic capacitor may increase after a long period of storage. After such storage, the capacitor must be aged by applying the rated operating voltage for 6–8 hours before use. Manual soldering: a Soldering must be performed within the specified conditions. Bit temperature: 350 °C; application time of soldering iron: 3 seconds. b Ensure that the soldering iron does not touch any part of the capacitor body. 2 3 4 5 6 7 8 9 10 Please read Cautions and warnings and Important notes at the end of this document. 22 08/08 Cautions and warnings 11 Do not apply excessive force to the leads and terminals. Do not move the capacitor after soldering it onto the PC board and do not carry the PC board by gripping the capacitor. Observe the following rules to prevent undue stress to the capacitor: a Do not tilt or bend the capacitor after soldering. b Ensure that the terminal spacing matches the corresponding hole spacing on the PC board. 12 The aluminum case is not insulated from the cathode. Do not place a conductor under the aluminum capacitors on the PC board as this may cause a short circuit. The case and top of capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink sleeve to ensure safe usage. The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing. 13 Please read Cautions and warnings and Important notes at the end of this document. 23 08/08 Important notes Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 24 08/08
B43004 价格&库存

很抱歉,暂时无法提供与“B43004”相匹配的价格&库存,您可以联系我们找货

免费人工找货

推荐型号