B57703M0502A004

NTC Thermistor NTC Probes Series/Type: Ordering code: M703/5k/2% B57703M0502A004 Date: Version: 2007-10-02 1 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white" (or invisible). This ensures that the table disappears for the customer PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or footer when copying the content. Identification/Classification 1: (header 1 + top left header bar) Identification/Classification 2: (header 2 + bottom left header bar) Ordering code: (top right header bar) Series/Type (top right header bar) Preliminary data (optional, if necessary) Department: Date: Prepared by: Release signed PE: Release signed QS: Modifications/Remarks: RT-curve on page 3 corrected NTC Thermistor NTC Probes B57703M0502A004 M703/5k/2% Data sheet KB S PE 2007-10-02 Döller Döller Intranet filename: B57703M0502A004_1 Customer: Sputnik Engineering, PN 07/21214 Specification No.: Issue of specification: Date of specification: Date of confirmation of specification by EPCOS: PPAP issue: PPAP date: Reliability Extended reliability (more than standard) © EPCOS AG 2007. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. NTC Thermistor NTC Probes B57703M0502A004 M703/5k/2% Data sheet Application High-accuracy surface temperature measurement, e.g. on housings and pipes Version Thermistor encapsulated in metal-tag case (material: brass, tinned) wire: AWG 28 stranded (19 x Ø0.07 mm, copper, silver-plated) Insulation: PTFE, blue s stripped ends tinned L1 = 45 ± 3 mm L2 = 12 ± 2 mm s = 5 ± 1 mm dimensions in mm, tolerances unless specified acc. to DIN ISO 2768-m No. 1 2 3 Item wire shrink tube ring tongue Material Cu silver-plated polyolefine brass, tinned Property Remarks AWG28 (19 x 0.07 mm) 125°C, UL224, VW-1 PTFE insulated, blue black Ratings and Characteristics Climatic Category (IEC 60068-1) Lower category temperature Higher category temperature : -25/125/56 [°C] : -25 [°C] : 125 Rated resistance RN // Tolerance Rated temperature B-value : B(25/100) // Tolerance R/T-Curve no. // R25 RN TN BN [Ω // %] : [°C] : [K//%]: [n//Ω]: 5000 // ± 2 25 3988 // ± 1 8016 // 5000 Power rating at 25°C Dissipation factor (air) Thermal cooling time constant (in air) Heat capacity P25 δth τC Cth [mW]: [mW/K] : [s] : [mJ/K] : 150 approx. 3 * approx. 50 * approx. 150 * Test voltage between ring tongue and connector pins, AC (50 Hz, 1s) [V] : 2500 * typical values, depends on mounting situation Remarks: PN 2007/21214 KB S PE Please read Cautions and warnings and Important notes at the end of this document. 2007-10-02 Page 2 of 6 NTC Thermistor NTC Probes B57703M0502A004 M703/5k/2% Data sheet RT-curve: NTC-RESISTANCE-TEMPERATURE-CURVE R/T-Curve R at 25°C = 8016 / A01 = 5000 Ω B(25/100) RN at 25 °C = 3988 K ± 1 % = 5000 Ω ± 2 % Temp. [°C] R Nom [Ω] R Min [Ω] R Max [Ω] ΔR [±%] ΔT [±°C] α [%/K] -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 65185 48535 36465 27665 21158 16325 12694 9950 7854 6245 5000 4029 3266 2663 2184 1802 1493 1244 1042 876 740,7 629 536,2 458,8 394,3 340 294,3 255,6 222,7 194,6 170,8 62092 46386 34961 26606 20407 15790 12311 9676 7656 6103 4900 3937 3185 2592 2121 1746 1444 1201 1004 842,7 711,3 603,0 513,2 438,5 376,1 323,9 279,9 242,8 211,2 184,4 161,6 68278 50684 37968 28724 21908 16860 13076 10224 8051 6387 5100 4120 3347 2735 2247 1857 1542 1287 1079 909,3 770,1 655,0 559,2 479,2 412,4 356,1 308,7 268,4 234,2 204,9 180,1 4,7 4,4 4,1 3,8 3,5 3,3 3,0 2,8 2,5 2,3 2,0 2,3 2,5 2,7 2,9 3,1 3,3 3,5 3,6 3,8 4,0 4,1 4,3 4,4 4,6 4,7 4,9 5,0 5,2 5,3 5,4 0,8 0,8 0,7 0,7 0,7 0,6 0,6 0,6 0,5 0,5 0,5 0,5 0,6 0,7 0,7 0,8 0,9 1,0 1,0 1,1 1,2 1,3 1,4 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 6,0 5,8 5,6 5,4 5,3 5,1 5,0 4,8 4,7 4,5 4,4 4,3 4,1 4,0 3,9 3,8 3,7 3,6 3,5 3,4 3,3 3,2 3,2 3,1 3,0 2,9 2,9 2,8 2,7 2,7 2,6 KB S PE Please read Cautions and warnings and Important notes at the end of this document. 2007-10-02 Page 3 of 6 NTC Thermistor NTC Probes B57703M0502A004 M703/5k/2% Data sheet Cautions and warnings Storage ƒ ƒ ƒ ƒ ƒ ƒ ƒ Store thermistors only in original packaging. Do not open the package before storage. Storage conditions in original packaging: storage temperature -25°C …+45°C, relative humidity ≤ 75% annual mean, maximum 95%, dew precipitation is inadmissible. Do not store thermistors where they are exposed to heat or direct sunlight. Otherwise, the packing material may be deformed or components may stick together, causing problems during mounting. Avoid contamination of thermistors surface during storage, handling and processing. Avoid storage of thermistor in harmful environments like corrosive gases (Sox, Cl etc.) After opening the factory seals, such as polyvinyl-sealed packages, use the components as soon as possible. Solder thermistors after shipment from EPCOS within the time specified: Leaded components: 24 months Handling ƒ ƒ ƒ NTC thermistors must not be dropped. Chip-offs must not be caused during handling of NTCs. Components should not be touched with bare hands. Gloves are recommended. Avoid contamination of thermistor surface during handling. Soldering ƒ ƒ ƒ ƒ Use resin-type flux or non-activated flux. Insufficient preheating may cause ceramic cracks. Rapid cooling by dipping in solvent is not recommended. Complete removal of flux is recommended. KB S PE Please read Cautions and warnings and Important notes at the end of this document. 2007-10-02 Page 4 of 6 NTC Thermistor NTC Probes B57703M0502A004 M703/5k/2% Data sheet Mounting ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ When thermistors are sealed, potted or overmolded, there must be no mechanical stress caused by thermal expansion during the production process (curing/overmolding process) and during later operation. The upper category temperature of the thermistor must not be exceeded. Ensure that the materials used (sealing/potting compound and plastic material) are chemically neutral. Electrodes/contacts must not be scratched before/during/after the mounting process. Contacts and housing used for assembly with thermistor have to be clean before mounting. During operation, the thermistor´s surface temperature can be very high (ICL). Ensure that adjacent components are placed at a sufficient distance from the thermistor to allow for proper cooling of the thermistors. Ensure that adjacent materials are designed for operation at temperatures comparable to the surface temperature of the thermistor. Be sure that surrounding parts and materials can withstand the temperature. Make sure that thermistors (ICLs) are adequately ventilated to avoid overheating. Avoid contamination of thermistor surface during processing. During mounting and operation tensile forces on the leads are to be avoided. Bending or twisting of the leads directly on the thermistor body is not permissible. Operation ƒ ƒ ƒ ƒ ƒ ƒ Use thermistors only within the specified operating temperature range. Use thermistors only within the specified voltage and current ranges (ICLs). Environmental conditions must not harm the thermistors. Use thermistors only in normal atmospheric conditions. Contact of NTC thermistors with any liquids and solvents should be prevented. It must be ensured that no water enters the NTC thermistors (e.g. through plug terminals). For measurement purposes (checking the specified resistance vs. temperature), the component must not be immersed in water but in suitable liquids (e.g. Galden). Avoid dewing and condensation unless thermistor is specified for these conditions. Be sure to provide an appropriate fail-safe function to prevent secondary product damage caused by malfunction (e.g. use VDR for limitation of overvoltage condition). KB S PE Please read Cautions and warnings and Important notes at the end of this document. 2007-10-02 Page 5 of 6 Important notes NTC Probes B57703M0502A004 M703/5k/2% The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. KB S PE Please read Cautions and warnings and Important notes at the end of this document. 2007-10-02 Page 6 of 6