B58100A0406A000

NTC thermistors for temperature measurement Probe assemblies, pipe mounted sensors Series/Type: Date: B58100 March 2006 © EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Temperature measurement B58100 Probe assemblies T120 Applications Pipe mounted sensor for measurement of fluid temperature in pipes Dimensional drawing Features Short response time through glass-encapsulated NTC thermistor Fast and easy mounting Options Available for pipes with diameter 13.5, 15, 18 and 22 mm Alternative resistance ratings available on request Alternative fast-on plug terminals 2.8 x 0.5 or 4.8 x 0.8 mm available Dimensions in mm Delivery mode Bulk (standard) General technical data Climatic category Maximum power Resistance tolerance Rated temperature Thermal time constant Insulation resistance Dissipation factor Test voltage (IEC 60068-1) (at 25 °C) P25 ∆RR/RR TR (measured on pipe) (V = 100 VDC, t = 1 s) (in air) (t = 1 min) Rins δth Vtest 5/100/21 18 ±3.6 60 10 approx. 2.1 500 mW % °C s MΩ mW/K VAC Electrical specification and ordering codes R25 No. of R/T characteristic Ω 10 k 10 k 10 k 10 k 10 k 10 k 10 k 8417 8417 8417 8417 8407 8407 8407 B25/100 for pipe diameter Ordering code K 4006 ±2% 4006 ±2% 4006 ±2% 4006 ±2% 3497 ±1% 3497 ±1% 3497 ±1% mm 13.5 15 18 22 13.5 18 22 B58100A0405A000 B58100A0528A000 B58100A0406A000 B58100A0439A000 B58100A0527A000 B58100A0506A000 B58100A0531A000 Please read Important notes and Cautions and warnings at the end of this document. Page 2 of 12 Temperature measurement B58100 Probe assemblies T120 Reliability data Test Standard Storage in dry heat IEC 60068-2-2 Storage in damp heat, steady state Rapid temperature cycling Thermal overload Test conditions Storage at upper category temperature T: 100 °C t: 500 h IEC Temperature of air: 85 °C 60068-2-78 Relative humidity of air: 85% Duration: 21 days IEC Lower test temperature: 5 °C 60068-2-14 Upper test temperature: 85 °C Number of cycles: 100 Short time overload: 125 °C t: 10 h Please read Important notes and Cautions and warnings at the end of this document. Page 3 of 12 ∆R100/R100 (typical) < 3% Remarks < 5% No visible damage < 3% No visible damage < 3% No visible damage No visible damage Temperature measurement B58100 Probe assemblies T120 R/T characteristics B58100A0405A000 R/T No. T (°C) 8417 B25/100 = 4006 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] α (%/K) 5.0 10.0 15.0 20.0 25.0 25607 20017 15768 12513 10000 23393 18397 14576 11630 9343 27821 21637 16961 13396 10657 8.6 8.1 7.6 7.1 6.6 1.7 1.7 1.6 1.5 1.5 5.0 4.8 4.7 4.6 4.4 30.0 35.0 40.0 45.0 50.0 8045 6514 5306 4348 3583 7555 6146 5030 4140 3426 8535 6881 5583 4556 3740 6.1 5.6 5.2 4.8 4.4 1.4 1.4 1.3 1.2 1.1 4.3 4.2 4.0 3.9 3.8 55.0 60.0 65.0 70.0 75.0 2968 2472 2068 1739 1469 2850 2383 1986 1664 1400 3086 2561 2150 1814 1537 4.0 3.6 4.0 4.3 4.7 1.1 1.0 1.1 1.3 1.4 3.7 3.6 3.5 3.4 3.3 80.0 85.0 90.0 95.0 100.0 1246 1061 907.8 779.5 671.8 1183 1005 856.3 732.8 629.5 1308 1118 959.4 826.2 714.2 5.0 5.4 5.7 6.0 6.3 1.5 1.7 1.8 2.0 2.1 3.2 3.2 3.1 3.0 2.9 105.0 110.0 115.0 120.0 581.1 504.4 439.3 383.9 542.7 469.6 407.7 355.2 619.5 539.2 470.9 412.5 6.6 6.9 7.2 7.5 2.3 2.5 2.6 2.8 2.9 2.8 2.7 2.7 B58100A0528A000 R/T No. T (°C) 8417 B25/100 = 4006 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] 5.0 10.0 15.0 20.0 25.0 25607 20017 15768 12513 10000 30.0 35.0 40.0 45.0 8045 6514 5306 4348 α (%/K) 23393 18397 14576 11630 9343 27821 21637 16961 13396 10657 8.6 8.1 7.6 7.1 6.6 1.7 1.7 1.6 1.5 1.5 5.0 4.8 4.7 4.6 4.4 7555 6146 5030 4140 8535 6881 5583 4556 6.1 5.6 5.2 4.8 1.4 1.4 1.3 1.2 4.3 4.2 4.0 3.9 Please read Important notes and Cautions and warnings at the end of this document. Page 4 of 12 Temperature measurement B58100 Probe assemblies T120 B58100A0528A000 R/T No. T (°C) 50.0 55.0 60.0 65.0 70.0 75.0 8417 B25/100 = 4006 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] 4.4 1.1 3740 3583 3426 α (%/K) 3.8 2968 2472 2068 1739 1469 2850 2383 1986 1664 1400 3086 2561 2150 1814 1537 4.0 3.6 4.0 4.3 4.7 1.1 1.0 1.1 1.3 1.4 3.7 3.6 3.5 3.4 3.3 80.0 85.0 90.0 95.0 100.0 1246 1061 907.8 779.5 671.8 1183 1005 856.3 732.8 629.5 1308 1118 959.4 826.2 714.2 5.0 5.4 5.7 6.0 6.3 1.5 1.7 1.8 2.0 2.1 3.2 3.2 3.1 3.0 2.9 105.0 110.0 115.0 120.0 581.1 504.4 439.3 383.9 542.7 469.6 407.7 355.2 619.5 539.2 470.9 412.5 6.6 6.9 7.2 7.5 2.3 2.5 2.6 2.8 2.9 2.8 2.7 2.7 B58100A0406A000 R/T No. T (°C) 8417 B25/100 = 4006 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] α (%/K) 5.0 10.0 15.0 20.0 25.0 25607 20017 15768 12513 10000 23393 18397 14576 11630 9343 27821 21637 16961 13396 10657 8.6 8.1 7.6 7.1 6.6 1.7 1.7 1.6 1.5 1.5 5.0 4.8 4.7 4.6 4.4 30.0 35.0 40.0 45.0 50.0 8045 6514 5306 4348 3583 7555 6146 5030 4140 3426 8535 6881 5583 4556 3740 6.1 5.6 5.2 4.8 4.4 1.4 1.4 1.3 1.2 1.1 4.3 4.2 4.0 3.9 3.8 55.0 60.0 65.0 70.0 75.0 2968 2472 2068 1739 1469 2850 2383 1986 1664 1400 3086 2561 2150 1814 1537 4.0 3.6 4.0 4.3 4.7 1.1 1.0 1.1 1.3 1.4 3.7 3.6 3.5 3.4 3.3 80.0 85.0 90.0 95.0 1246 1061 907.8 779.5 1183 1005 856.3 732.8 1308 1118 959.4 826.2 5.0 5.4 5.7 6.0 1.5 1.7 1.8 2.0 3.2 3.2 3.1 3.0 Please read Important notes and Cautions and warnings at the end of this document. Page 5 of 12 Temperature measurement B58100 Probe assemblies T120 B58100A0406A000 R/T No. T (°C) 100.0 105.0 110.0 115.0 120.0 8417 B25/100 = 4006 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] 671.8 629.5 714.2 6.3 2.1 581.1 504.4 439.3 383.9 542.7 469.6 407.7 355.2 619.5 539.2 470.9 412.5 6.6 6.9 7.2 7.5 2.3 2.5 2.6 2.8 α (%/K) 2.9 2.9 2.8 2.7 2.7 B58100A0439A000 R/T No. T (°C) 8417 B25/100 = 4006 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] α (%/K) 5.0 10.0 15.0 20.0 25.0 25607 20017 15768 12513 10000 23393 18397 14576 11630 9343 27821 21637 16961 13396 10657 8.6 8.1 7.6 7.1 6.6 1.7 1.7 1.6 1.5 1.5 5.0 4.8 4.7 4.6 4.4 30.0 35.0 40.0 45.0 50.0 8045 6514 5306 4348 3583 7555 6146 5030 4140 3426 8535 6881 5583 4556 3740 6.1 5.6 5.2 4.8 4.4 1.4 1.4 1.3 1.2 1.1 4.3 4.2 4.0 3.9 3.8 55.0 60.0 65.0 70.0 75.0 2968 2472 2068 1739 1469 2850 2383 1986 1664 1400 3086 2561 2150 1814 1537 4.0 3.6 4.0 4.3 4.7 1.1 1.0 1.1 1.3 1.4 3.7 3.6 3.5 3.4 3.3 80.0 85.0 90.0 95.0 100.0 1246 1061 907.8 779.5 671.8 1183 1005 856.3 732.8 629.5 1308 1118 959.4 826.2 714.2 5.0 5.4 5.7 6.0 6.3 1.5 1.7 1.8 2.0 2.1 3.2 3.2 3.1 3.0 2.9 105.0 110.0 115.0 120.0 581.1 504.4 439.3 383.9 542.7 469.6 407.7 355.2 619.5 539.2 470.9 412.5 6.6 6.9 7.2 7.5 2.3 2.5 2.6 2.8 2.9 2.8 2.7 2.7 Please read Important notes and Cautions and warnings at the end of this document. Page 6 of 12 Temperature measurement B58100 Probe assemblies T120 B58100A0527A000 R/T No. T (°C) 8407 B25/100 = 3497 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] α (%/K) 5.0 10.0 15.0 20.0 25.0 22468 18187 14813 12136 10000 21171 17180 14026 11518 9512 23765 19194 15600 12755 10488 5.8 5.5 5.3 5.1 4.9 1.3 1.3 1.3 1.3 1.3 4.3 4.2 4.0 3.9 3.8 30.0 35.0 40.0 45.0 50.0 8284 6899 5774 4856 4103 7897 6590 5526 4656 3941 8672 7209 6022 5056 4264 4.7 4.5 4.3 4.1 3.9 1.3 1.2 1.2 1.2 1.2 3.7 3.6 3.5 3.4 3.3 55.0 60.0 65.0 70.0 75.0 3482 2967 2539 2182 1882 3351 2860 2444 2096 1805 3613 3074 2635 2267 1958 3.8 3.6 3.8 3.9 4.1 1.2 1.1 1.2 1.3 1.4 3.2 3.2 3.1 3.0 2.9 80.0 85.0 90.0 95.0 100.0 1629 1415 1234 1079 946.6 1560 1353 1178 1029 901.4 1698 1477 1289 1129 991.8 4.2 4.4 4.5 4.6 4.8 1.5 1.6 1.7 1.8 1.8 2.8 2.8 2.7 2.6 2.6 105.0 110.0 115.0 120.0 833.1 735.5 651.1 578.1 792.3 698.5 617.6 547.6 874.0 772.5 684.7 608.6 4.9 5.0 5.2 5.3 1.9 2.0 2.1 2.2 2.5 2.5 2.4 2.4 B58100A0506A000 R/T No. T (°C) 8407 B25/100 = 3497 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] α (%/K) 5.0 10.0 15.0 20.0 25.0 22468 18187 14813 12136 10000 21171 17180 14026 11518 9512 23765 19194 15600 12755 10488 5.8 5.5 5.3 5.1 4.9 1.3 1.3 1.3 1.3 1.3 4.3 4.2 4.0 3.9 3.8 30.0 35.0 40.0 45.0 50.0 8284 6899 5774 4856 4103 7897 6590 5526 4656 3941 8672 7209 6022 5056 4264 4.7 4.5 4.3 4.1 3.9 1.3 1.2 1.2 1.2 1.2 3.7 3.6 3.5 3.4 3.3 Please read Important notes and Cautions and warnings at the end of this document. Page 7 of 12 Temperature measurement B58100 Probe assemblies T120 B58100A0506A000 R/T No. T (°C) 55.0 60.0 65.0 70.0 75.0 8407 B25/100 = 3497 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] 3.8 1.2 3613 3482 3351 3.6 1.1 3074 2967 2860 3.8 1.2 2635 2539 2444 3.9 1.3 2267 2182 2096 4.1 1.4 1958 1882 1805 α (%/K) 3.2 3.2 3.1 3.0 2.9 80.0 85.0 90.0 95.0 100.0 1629 1415 1234 1079 946.6 1560 1353 1178 1029 901.4 1698 1477 1289 1129 991.8 4.2 4.4 4.5 4.6 4.8 1.5 1.6 1.7 1.8 1.8 2.8 2.8 2.7 2.6 2.6 105.0 110.0 115.0 120.0 833.1 735.5 651.1 578.1 792.3 698.5 617.6 547.6 874.0 772.5 684.7 608.6 4.9 5.0 5.2 5.3 1.9 2.0 2.1 2.2 2.5 2.5 2.4 2.4 B58100A0531A000 R/T No. T (°C) 8407 B25/100 = 3497 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] α (%/K) 5.0 10.0 15.0 20.0 25.0 22468 18187 14813 12136 10000 21171 17180 14026 11518 9512 23765 19194 15600 12755 10488 5.8 5.5 5.3 5.1 4.9 1.3 1.3 1.3 1.3 1.3 4.3 4.2 4.0 3.9 3.8 30.0 35.0 40.0 45.0 50.0 8284 6899 5774 4856 4103 7897 6590 5526 4656 3941 8672 7209 6022 5056 4264 4.7 4.5 4.3 4.1 3.9 1.3 1.2 1.2 1.2 1.2 3.7 3.6 3.5 3.4 3.3 55.0 60.0 65.0 70.0 75.0 3482 2967 2539 2182 1882 3351 2860 2444 2096 1805 3613 3074 2635 2267 1958 3.8 3.6 3.8 3.9 4.1 1.2 1.1 1.2 1.3 1.4 3.2 3.2 3.1 3.0 2.9 1629 1415 1234 1079 946.6 1560 1353 1178 1029 901.4 1698 1477 1289 1129 991.8 4.2 4.4 4.5 4.6 4.8 1.5 1.6 1.7 1.8 1.8 2.8 2.8 2.7 2.6 2.6 80.0 85.0 90.0 95.0 100.0 Please read Important notes and Cautions and warnings at the end of this document. Page 8 of 12 Temperature measurement B58100 Probe assemblies T120 B58100A0531A000 R/T No. T (°C) 105.0 110.0 115.0 120.0 8407 B25/100 = 3497 K, R25 = 10000 Ω, TR = 60 °C, ∆RR/RR = ± 3.6% Rnom[Ω] Rmin[Ω] Rmax[Ω] ∆RR/RR[±%] ∆T[±°C] 833.1 792.3 874.0 4.9 1.9 735.5 698.5 772.5 5.0 2.0 651.1 617.6 684.7 5.2 2.1 578.1 547.6 608.6 5.3 2.2 Please read Important notes and Cautions and warnings at the end of this document. Page 9 of 12 α (%/K) 2.5 2.5 2.4 2.4 Temperature measurement B58100 Probe assemblies T120 Cautions and warnings General See "Important notes" at the end of this document. Storage Store thermistors only in original packaging. Do not open the package before storage. Storage conditions in original packaging: storage temperature 25 °C ... +45 °C, relative humidity ≤75% annual mean, maximum 95%, dew precipitation is inadmissible. Do not store SMDs where they are exposed to heat or direct sunlight. Otherwise, the packing material may be deformed or SMDs may stick together, causing problems during mounting. Avoid contamination of thermistors surface during storage, handling and processing. Avoid storage of thermistor in harmful environments like corrosive gases (SOx, Cl etc). After opening the factory seals, such as polyvinyl-sealed packages, use the SMDs as soon as possible. Solder thermistors after shipment from EPCOS within the time specified: SMDs: 12 months Leaded components: 24 months Handling NTC thermistors must not be dropped. Chip-offs must not be caused during handling of NTCs. Components must not be touched with bare hands. Gloves are recommended. Avoid contamination of thermistor surface during handling. Soldering Use resin-type flux or non-activated flux. Insufficient preheating may cause ceramic cracks. Rapid cooling by dipping in solvent is not recommended. Complete removal of flux is recommended. Mounting When NTC thermistors are encapsulated with sealing material or overmolded with plastic material, the precautions given in chapter “Mounting instructions”, “Sealing, potting and overmolding” must be observed. Electrode must not be scratched before/during/after the mounting process. Contacts and housings used for assembly with thermistor have to be clean before mounting. During operation, the thermistor’s surface temperature can be very high (ICL). Ensure that adjacent components are placed at a sufficient distance from the thermistor to allow for proper cooling ot the thermistors. Ensure that adjacent materials are designed for operation at temperatures comparable to the surface temperature of the thermistor. Be sure that surrounding parts and materials can withstand this temperature. Make sure that thermistors (ICLs) are adequately ventilated to avoid overheating. Avoid contamination of thermistor surface during processing. Please read Important notes and Cautions and warnings at the end of this document. Page 10 of 12 Temperature measurement B58100 Probe assemblies T120 Operation Use thermistors only within the specified operating temperature range. Use thermistors only within the specified voltage and current ranges (ICLs). Environmental conditions must not harm the thermistors. Use thermistors only in normal atmospheric conditions. Contact of NTC thermistors with any liquids and solvents should be prevented. It must be ensured that no water enters the NTC thermistor (e.g. through plug terminals). For measurement purposes (checking the specified resistance vs. temperature), the component must not be immersed in water but in suitable liquids (e.g. Galden). Avoid dewing and condensation. Be sure to provide an appropriate fail-safe function to prevent secondary product damage caused by malfunction (e.g. use VDR for limitation of overvoltage condition). Please read Important notes and Cautions and warnings at the end of this document. Page 11 of 12 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 12 of 12