B59641A145A62

PTC thermistors as limit temperature sensors SMD, EIA case sizes 0402, 0603 and 0805, superior series Series/Type: B59421, B59641, B59721 Date: August 2019 © TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Applications Over-temperature protection of power components DC/DC converters SMPS Notebooks Home appliances Dimmers Electronic ballasts Automotive electronics Secondary protection of battery packs Features Qualification based on AEC-Q200 rev. D Suitable for reflow soldering Suitable for flow soldering only for types with ordering code ending in A562 Fast and reliable response RoHS-compatible UL approval to UL1434 Certified in accordance with IEC 60738-1 and IEC 60730-1; Annex J15 and J17 Lead-free terminations (tinned) for EIA case sizes 0603 and 0805 Lead-free ceramics for EIA case sizes 0402 and 0805, except B59421A0135A062 Options Other Tsense or resistance values on request Delivery mode Blister tape (EIA case size 0805) or cardboard tape (EIA case sizes 0402 and 0603), 180-mm reel with 8-mm tape, taping to IEC 60286-3 Packing unit: 10.000 pcs. for EIA case size 0402, 4.000 pcs. for EIA case sizes 0805 and 0603 General technical data Max. operating voltage Minimum operating temperature Maximum operating temperature Please read Cautions and warnings and Important notes at the end of this document. (V ≤ Vmax) (V ≤ Vmax) Page 2 of 35 Vmax Top,min Top,max 32 40 125 °C or Tsense,1 +25 °C whichever is higher V DC °C °C Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Electrical specifications and ordering codes EIA case sizes 0402 and 0603 RR (V ≤ Vmax) Ω ∆RR % Tsense,1 (@ 4.7 kΩ) °C Tsense,2 (@ 47 kΩ) °C Ordering code EIA case size 0402 470 ±50 75 ±5 B59421A0075A062 470 ±50 85 ±5 B59421A0085A062 470 ±50 95 ±5 B59421A0095A062 470 ±50 105 ±5 B59421A0105A062 470 ±50 115 ±5 B59421A0115A062 470 ±50 125 ±5 B59421A0125A062 470 ±50 135 ±5 B59421A0135A062 EIA case size 0603 470 ±50 75 ±5 90 ±7 B59641A0075A062 470 ±50 85 ±5 100 ±7 B59641A0085A062 470 ±50 95 ±5 110 ±7 B59641A0095A062 470 ±50 95 ±5 B59641A0095A562 470 ±50 105 ±5 120 ±7 B59641A0105A062 470 ±50 105 ±5 B59641A0105A562 470 ±50 115 ±5 130 ±7 B59641A0115A062 470 ±50 125 ±5 140 ±7 B59641A0125A062 470 ±50 135 ±5 150 ±7 B59641A0135A062 470 ±50 145 ±5 B59641A0145A062 Note: In order to limit self heating effects the electrical power during measurement should be below 2 mW for EIA case size 0402 and below 4 mW for EIA case size 0603. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 35 Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Electrical specifications and ordering codes EIA case size 0805 RR (V ≤ Vmax) Ω ∆RR Tsense,1 R R (Tsense,1 5°C) (Tsense,1 +5°C) % °C kΩ kΩ R (Tsense,1 +15°C) kΩ Ordering code EIA case size 0805 680 ±50 70 ≤ 5.7 ≥ 5.7 ≥ 401) B59721A0070A062 680 ±50 80 ≤ 5.7 ≥ 5.7 ≥ 401) B59721A0080A062 680 ±50 90 ≤ 5.5 ≥ 13.3 ≥ 40 B59721A0090A062 680 ±50 90 ≤ 5.5 ≥ 13.3 ≥ 40 B59721A0090A562 680 ±50 100 ≤ 5.5 ≥ 13.3 ≥ 40 B59721A0100A062 680 ±50 100 ≤ 5.5 ≥ 13.3 ≥ 40 B59721A0100A562 680 ±50 110 ≤ 5.5 ≥ 13.3 ≥ 40 B59721A0110A062 680 ±50 120 ≤ 5.5 ≥ 13.3 ≥ 40 B59721A0120A062 680 ±50 130 ≤ 5.5 ≥ 13.3 ≥ 40 B59721A0130A062 Note: In order to limit self heating effects the electrical power during measurement should be below 6 mW for EIA case size 0805. 1) R (Tsense,1 +25 °C) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 35 Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Dimensional drawings in mm EIA case size 0402 Solder pad Recommended maximum dimensions (mm) EIA case size 0603 Solder pad Recommended maximum dimensions (mm) EIA case size 0805 Solder pad Recommended maximum dimensions (mm) Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 35 Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Reliability data Test Electrical endurance, cycling Electrical endurance, constant Damp heat Standard IEC 60738-1 Rapid change of temperature I IEC 60738-1 Rapid change of temperature II AEC-Q200 / IEC 60738-1, item 4.17 IEC 60738-1 Vibration I IEC 60738-1 IEC 60738-1 Vibration II MIL-STD-202, method 204 Shock IEC 60738-1 Climatic sequence IEC 60738-1 Bending test IEC 60738-1 Please read Cautions and warnings and Important notes at the end of this document. Test conditions Room temperature: Ismax , Vmax; Number of cycles: 100 Storage at Vmax and Top,max (@ Vmax) Test duration: 1000 h Temperature of air: 40 °C Relative humidity of air: 93% Duration: 56 days Test according to IEC 60068-2-78 TLCT = Top,min, TUCT = Top,max Number of cycles: 5 Test duration: 30 min Test according to IEC 60068-2-14, test Na TLCT = 55 °C, TUCT = 125 °C Number of cycles: 1000 Frequency: 10 ... 2000 Hz Displacement amplitude: 0.75 mm, resp. Acceleration: 98 m/s2 Test duration: 3 × 2 h Test according to IEC 60028-2-6, test Fc Frequency: 10 ... 2000 Hz Displacement amplitude: 0.75 mm, resp. Acceleration: 50 m/s2 Test duration: 3 × 2 h Test according to IEC 60028-2-6, test Fc Pulse shape: half-sine Acceleration: 400 m/s2 Pulse duration: 6 ms; 6 x 5000 pulses Test according to IEC 60068-2-27, test Ea ∆R25/R25 < 20% Dry heat: TUCT = 125 °C Test duration: 16 h Damp heat first cycle Cold: TLCT = 40 °C Test duration: 2 h Damp heat 5 cycles Tests performed according to IEC 60068-2-30 Components reflow-soldered to test board Maximum bendig: 2 mm Test according to IEC 60068-2-21, test Ue < 20% Page 6 of 35 < 20% < 20% < 20% < 25% < 20% < 20% < 20% < 20% Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Test Shear test Standard Humidity Superior series Test conditions Shearing of the component soldered on PCB by a force of 5 N normal to components longitudinal axis T = 85 °C; H = 85% r.H.; t = 1000 h V = 0.05  Vmax AEC-Q200 / MIL-STD-202, method 103 Resistance to AEC-Q200 / Soldering bath: 260 °C; t = 20 s soldering heat IEC 60068-2-20, test Tb ESD AEC-Q200-002 150 pF/ 330 Ω; 8 kV contact discharge, 10 pulses in each polarity High temperature load Soldered PTC to PCB @ 85 °C, load maximum operating voltage for 1.5 h on and 0.5 h off. This cycle is repeated for 1000 ±12 h Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 35 ∆R25/R25 No visible damage < 20% < 20% < 20% < 20% Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0402 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 400 815 1.230 70 1.300 2.700 345 692 1.040 75 2.400 4.700 9.800 300 605 910 80 4.700 8.500 20.500 10 270 540 810 85 7.700 14.200 39.500 0 243 486 730 90 11.700 23.500 72.000 10 235 470 705 93 14.900 31.000 100.000 20 232 463 695 100 25.100 59.000  25 235 470 705 106 38.500 100.000 30 238 477 717 110 51.000  35 247 490 739 120 100.000 40 260 520 790 50 320 660 940 60 500 990 1.400 30 20 Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 35  4.700    Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0402 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 409 835 1.260 65 328 670 1.030 358 724 1.090 70 410 830 1.450 316 640 963 75 590 1.200 2.500 10 287 578 870 80 1.070 2.250 4.700 0 264 531 800 85 2.300 4.700 8.900 10 247 498 748 90 4.700 8.500 16.000 20 237 476 715 100 12.800 24.000 46.000 25 235 472 709 108 24.500 49.000 100.000 30 233 468 706 117 46.000 100.000 235 473 712 120 56.000   40 50 249 504 760 130 100.000 55 265 537 809 60 289 588 890 30 20 Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 35    Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0402 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 429 887 1.346 80 390 810 1.300 373 765 1.158 85 580 1.200 2.200 330 673 1.015 90 1.100 2.300 4.700 10 297 603 909 95 2.300 4.700 10.200 19.000 30 20 0 272 548 824 100 4.700 9.300 10 253 508 764 110 14.000 27.500 57.000 20 240 481 722 116 24.000 49.500 100.000 25 235 470 705 120 33.000 69.000  40 227 452 684 124 45.500 100.000 50 231 461 697 130 71.000  60 242 490 743 135 100.000 70 278 570 868 75 316 650 994 Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 35     Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0402 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 420 880 1.340 90 330 743 1.150 368 774 1.180 95 460 1.150 2.000 329 679 1.030 100 930 2.200 4.700 10 298 604 910 105 2.250 4.700 9.900 0 273 557 840 110 4.700 9.500 19.000 10 254 517 780 115 7.500 16.500 35.000 25 235 470 705 120 11.500 26.000 61.000 40 222 445 667 125 16.700 42.000 100.000 50 218 436 655 130 24.000 64.000  60 219 439 658 136 36.000 100.000 70 229 458 687 140 46.000  80 256 518 780 153 100.000 30 20 Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 35     Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0402 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 30 20 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 420 880 1.340 100 283 580 990 368 774 1.180 105 372 830 1.750 329 679 1.030 110 640 1.800 4.700 10 298 608 910 115 1.700 4.700 12.500 0 273 556 840 120 4.700 10.500 29.000 10 254 514 780 129 12.400 29.000 100.000 25 235 470 705 130 13.500 32.000  40 220 433 655 140 29.600 82.000 50 213 416 632 142 34.500 100.000 60 207 402 615 150 61.000  70 206 400 605 157 100.000 80 209 408 630 90 226 440 710 Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 35      Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0402 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 435 860 1.310 100 205 416 385 752 1.140 110 240 520 900 342 675 1.025 115 322 800 1.700 10 308 608 930 120 630 1.800 4.700 0 278 558 848 125 1.850 4.700 11.500 10 258 514 780 130 4.700 9.900 24.000 25 235 470 705 140 16.000 33.000 88.000 40 218 431 645 141 17.800 37.000 100.000 50 208 410 610 150 40.000 92.000  60 200 391 580 151 43.500 100.000 70 195 380 562 160 87.000  80 192 373 555 162 100.000 90 194 383 568 30 20 Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 35  622    Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0402 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 467 966 1.465 95 270 560 398 820 1.241 100 293 604 970 348 710 1.072 105 325 670 1.090 10 310 628 946 110 368 760 1.270 0 281 566 852 115 438 900 1.530 10 258 517 777 120 570 1.100 1.960 20 241 484 727 125 830 1.550 2.800 25 235 470 705 130 1.350 2.500 4.700 40 224 447 670 135 2.400 4.700 9.100 50 219 439 659 140 4.700 9.000 19.000 60 219 441 662 150 15.000 33.000 88.000 70 224 453 682 151 16.700 37.000 100.000 80 235 480 726 160 40.000 95.000  90 253 523 810 30 20 Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 35 880 Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0603 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 296 680 1.100 60 430 920 1.600 270 610 980 65 590 1.350 2.500 255 550 870 70 1.000 2.300 4.700 10 244 510 790 75 2.050 4.700 10.000 25.000 30 20 0 235 485 740 80 4.700 10.300 10 231 470 705 83 7.300 17.000 47.000 20 232 465 700 96 11.100 26.500 100.000 25 235 470 705 90 19.000 47.000  30 240 480 720 95 37.000 100.000 40 265 520 800 97 47.000  50 310 620 990 103 100.000 Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 35     Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0603 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 350 772 1.250 90 4.700 11.000 29.000 290 620 970 93 7.300 17.500 47.000 10 270 568 880 95 9.700 23.500 61.000 0 252 522 805 99 17.000 42.000 100.000 10 242 490 750 100 19.500 47.000  25 235 470 705 105 37.000 82.000 40 248 490 736 107 47.000 100.000 50 278 550 830 110 65.500  60 346 690 1.050 114 100.000 70 498 1.030 1.530 75 680 1.450 2.300 80 1.080 2.300 4.700 85 2.150 4.700 12.000 20 Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 35      Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0603 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 350 770 1.300 85 640 1.350 298 585 999 90 1.030 2.210 4.700 10 277 540 900 95 2.050 4.700 11.000 28.000 20 2.350 0 261 510 820 100 4.700 10.500 10 248 485 755 103 7.200 17.000 47.000 20 238 472 715 108 14.000 35.500 100.000 25 235 470 705 110 18.300 47.000 30 237 472 708 115 36.000 100.000 40 243 480 725 117 47.000 50 257 510 770 123 100.000 60 285 570 870 70 345 710 1.050 80 478 995 1.550 Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 35 Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0603 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 500 1.050 1.720 80 300 585 900 355 743 1.130 90 450 810 1.380 10 310 635 965 95 645 1.200 2.200 0 275 558 850 100 1.100 2.200 4.700 10 255 508 770 105 2.200 4.700 12.600 20 240 479 718 110 4.700 10.900 29.500 25 235 470 705 113 7.500 18.000 47.000 30 230 460 690 118 15.800 37.000 100.000 40 222 447 674 120 21.000 47.000  50 222 448 676 125 38.000 83.000 60 231 465 698 127 47.000 100.000 70 252 503 762 136 100.000  20 Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 35    Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0603 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 410 900 1.700 90 290 560 840 335 690 1.200 100 410 780 1.250 10 305 612 1.020 105 570 1.090 2.050 0 278 552 890 110 960 2.050 4.700 10 256 510 790 115 1.950 4.700 12.000 20 241 482 728 120 4.700 11.000 29.000 25 235 470 705 123 7.700 17.500 47.000 30 231 460 690 128 15.400 36.000 100.000 40 225 441 670 130 20.000 47.000 50 221 430 655 136 42.500 100.000 60 220 425 650 137 47.000 70 225 438 665 145 100.000 80 243 475 710 20 Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 35 Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0603 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 380 810 1.500 90 222 461 320 668 1.140 100 250 541 900 10 296 612 1.010 110 325 765 1.350 2.200 20 716 0 275 563 900 115 430 1.060 10 256 520 800 120 700 1.900 4.700 20 241 486 728 125 1.680 4.700 11.000 25 235 470 705 130 4.700 10.000 28.000 30 229 458 688 133 7.700 15.500 47.000 40 220 439 660 137 13.500 29.000 100.000 50 211 425 641 140 20.000 47.000  60 207 417 630 145 36.700 100.000 70 206 415 634 147 47.000  80 210 426 655 154 100.000 Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 35     Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0603 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 380 810 1.460 100 203 432 320 668 1.130 110 225 495 825 10 296 612 1.008 120 292 665 1.230 2.100 20 690 0 275 563 900 125 402 980 10 256 520 800 130 680 1.950 4.700 20 241 486 728 135 1.610 4.700 11.000 25 235 470 705 140 4.700 10.500 28.000 30 229 456 687 143 7.700 16.500 47.000 40 218 433 655 147 13.500 30.000 100.000 50 209 416 630 150 19.800 47.000  60 202 404 614 155 36.800 100.000 70 198 396 609 157 47.000  80 195 397 615 163 100.000 90 196 405 635 Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 35     Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0603 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 380 800 1.400 100 205 410 650 320 662 1.100 110 218 438 710 10 296 608 990 120 245 505 845 0 275 561 892 130 310 685 1.280 10 256 519 795 135 410 1.000 2.150 20 241 485 728 140 710 2.030 4.700 25 235 470 705 145 1.610 4.700 11.000 30 229 456 687 150 4.700 10.500 28.000 40 218 433 655 153 7.700 16.800 47.000 50 209 414 630 157 13.500 30.500 100.000 60 202 400 614 160 19.800 47.000  70 198 392 605 165 37.000 100.000 80 195 390 610 167 47.000  90 196 395 625 174 100.000 20 Please read Cautions and warnings and Important notes at the end of this document. Page 22 of 35     Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0805 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 460 940 1.430 50 470 870 1.420 395 795 1.190 60 720 1.370 2.610 10 370 745 1.110 65 1.160 2.400 5.700 0 350 709 1.050 70 2.500 5.700 16.500 10 340 685 1.022 75 5.700 12.500 52.000 20 337 678 1.015 78 8.700 19.700 100.000 25 340 680 1.020 80 11.200 26.000  30 345 688 1.030 89 32.500 100.000 40 380 735 1.110 99 100.000  20 Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 35   Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0805 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 490 1.110 1.690 60 455 900 1.420 415 905 1.340 70 690 1.390 2.600 10 388 822 1.210 75 1.100 2.440 5.700 0 365 755 1.120 80 2.500 5.700 17.000 10 350 710 1.060 85 5.700 12.700 52.500 20 342 683 1.025 88 8.600 20.800 100.000 25 340 680 1.020 90 11.400 28.000  30 339 677 1.016 98 31.500 100.000 40 348 697 1.045 108 100.000  50 378 750 1.120 20 Please read Cautions and warnings and Important notes at the end of this document. Page 24 of 35   Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0805 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 540 1.200 1.900 60 360 760 1.110 455 960 1.460 70 450 960 1.450 10 420 870 1.310 80 720 1.700 2.600 0 390 790 1.200 85 1.290 2.900 5.500 10 365 730 1.110 90 3.800 9.200 22.000 20 347 690 1.040 95 13.300 26.000 80.000 25 340 680 1.020 96 15.900 30.500 100.000 30 335 675 1.010 100 28.000 57.000  40 330 670 995 104 45.000 100.000 50 335 686 1.010 111 100.000  20 Please read Cautions and warnings and Important notes at the end of this document. Page 25 of 35   Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0805 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 600 1.360 2.010 60 315 620 935 485 1.055 1.570 70 341 665 1.010 10 440 945 1.400 80 420 830 1.270 0 403 845 1.250 90 640 1.350 2.200 10 373 765 1.140 95 1.100 2.500 5.500 20 350 703 1.050 100 3.550 8.300 21.000 25 340 680 1.020 105 13.300 26.200 69.000 30 332 662 998 107 19.000 37.500 100.000 40 320 635 955 113 39.000 100.000 312 618 930 122 100.000   50 20 Please read Cautions and warnings and Important notes at the end of this document. Page 26 of 35  Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0805 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 565 1.260 2.150 70 288 522 468 1.025 1.660 80 311 560 870 10 431 930 1.480 90 385 725 1.110 2.080 20 810 0 400 840 1.320 100 620 1.300 10 373 766 1.180 105 1.080 2.500 5.500 20 350 706 1.060 110 3.500 8.500 30.000 25 340 680 1.020 114 10.800 25.000 100.000 30 331 653 985 115 13.300 31.000  40 315 610 930 120 30.000 100.000 50 300 570 875 129 100.000  60 290 538 830 Please read Cautions and warnings and Important notes at the end of this document. Page 27 of 35   Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0805 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 555 1.205 1.980 70 266 485 755 468 1.000 1.595 80 257 458 715 10 432 915 1.435 90 256 454 713 0 400 833 1.298 100 275 510 825 10 375 768 1.170 110 355 810 1.500 20 352 708 1.060 115 560 1.700 5.500 25 340 680 1.020 120 2.500 10.000 45.000 30 329 654 983 122 5.000 19.000 100.000 40 310 604 917 125 13.300 45.000  50 292 561 855 128 23.000 100.000 60 278 520 798 139 100.000  20 Please read Cautions and warnings and Important notes at the end of this document. Page 28 of 35   Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Characteristics (typical) for case size 0805 PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage). Rmin and Rmax values are typical values for reference only. TPTC °C 40 Rmin Ω Rtypical Ω Rmax Ω TPTC °C Rmin Ω Rtypical Ω Rmax Ω 548 1.190 1.930 80 233 440 675 465 990 1.570 90 220 408 630 10 432 908 1.405 100 212 390 605 0 401 830 1.278 110 218 425 660 10 375 765 1.160 120 270 620 1.180 20 352 707 1.060 125 410 1.300 5.500 25 340 680 1.020 130 1.670 12.000 65.000 30 329 652 980 131 2.550 19.000 100.000 40 307 601 910 135 13.300 62.000  50 287 556 845 137 23.000 100.000 60 268 515 785 145 100.000  70 250 476 726 20 Please read Cautions and warnings and Important notes at the end of this document. Page 29 of 35   Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Cautions and warnings General TDK Electronics thermistors are designed for specific applications and should not be used for purposes not identified in our specifications, application notes and data books unless otherwise agreed with TDK Electronics during the design-in-phase. Ensure suitability of thermistor through reliability testing during the design-in phase. The thermistors should be evaluated taking into consideration worst-case conditions. Storage Store thermistors only in original packaging. Do not open the package prior to processing. Storage conditions in original packaging: storage temperature 25 °C ... +45 °C, relative humidity ≤75% annual mean, maximum 95%, dew precipitation is inadmissible. Avoid contamination of thermistors surface during storage, handling and processing. Avoid storage of thermistor in harmful environment with effect on function on long-term operation (examples given under operation precautions). Use thermistor within the following period after delivery:  Through-hole devices (housed and leaded PTCs): 24 months  Motor protection sensors, glass-encapsulated sensors and probe assemblies: 24 months  Telecom pair and quattro protectors (TPP, TQP): 24 months  Leadless PTC thermistors for pressure contacting: 12 months  Leadless PTC thermistors for soldering: 6 months  SMDs in EIA sizes 3225 and 4032, and for PTCs with metal tags: 24 months  SMDs in EIA sizes 1210 and smaller: 12 months Handling PTCs must not be dropped. Chip-offs must not be caused during handling of PTCs. The ceramic and metallization of the components must not be touched with bare hands. Gloves are recommended. Avoid contamination of thermistor surface during handling. Soldering (where applicable) Use rosin-type flux or non-activated flux. Insufficient preheating may cause ceramic cracks. Rapid cooling by dipping in solvent is not recommended. Complete removal of flux is recommended. Standard PTC heaters are not suitable for soldering. Please read Cautions and warnings and Important notes at the end of this document. Page 30 of 35 Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Superior series Mounting Electrode must not be scratched before/during/after the mounting process. Contacts and housing used for assembly with thermistor have to be clean before mounting. Especially grease or oil must be removed. When PTC thermistors are encapsulated with sealing material, the precautions given in chapter "Mounting instructions", "Sealing and potting" must be observed. When the thermistor is mounted, there must not be any foreign body between the electrode of the thermistor and the clamping contact. The minimum force and pressure of the clamping contacts pressing against the PTC must be 10 N and 50 kPa, respectively. In case the assembly is exposed to mechanical shock and/ or vibration this force should be higher in order to avoid movement of the PTC during operation. During operation, the thermistor’s surface temperature can be very high. Ensure that adjacent components are placed at a sufficient distance from the thermistor to allow for proper cooling at the thermistors. Ensure that adjacent materials are designed for operation at temperatures comparable to the surface temperature of thermistor. Be sure that surrounding parts and materials can withstand this temperature. Avoid contamination of thermistor surface during processing. Operation Use thermistors only within the specified temperature operating range. Use thermistors only within the specified voltage and current ranges. Environmental conditions must not harm the thermistors. Use thermistors only in normal atmospheric conditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions. Contact with any liquids and solvents should be prevented. Be sure to provide an appropriate fail-safe function to prevent secondary product damage caused by abnormal function (e.g. use VDR for limitation of overvoltage condition). This listing does not claim to be complete, but merely reflects the experience of TDK Electronics. Display of ordering codes for TDK Electronics products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications, on the company website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes. Please read Cautions and warnings and Important notes at the end of this document. Page 31 of 35 Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 Symbols and terms Symbol A C Cth f I Imax IR Ires IPTC Ir Ir,oil Ir,air IRMS IS ISmax LCT N Nc Nf P P25 Pel Pdiss RG Rmin RR ∆RR RP RPTC Rref RS R25 R25,match ∆R25 Term Area Capacitance Heat capacity Frequency Current Maximum current Rated current Residual current PTC current Residual currrent Residual currrent in oil (for level sensors) Residual currrent in air (for level sensors) Root-mean-square value of current Switching current Maximum switching current Lower category temperature Number (integer) Operating cycles at Vmax, charging of capacitor Switching cycles at Vmax, failure mode Power Maximum power at 25 °C Electrical power Dissipation power Generator internal resistance Minimum resistance Rated resistance @ rated temperature TR Tolerance of RR Parallel resistance PTC resistance Reference resistance Series resistance Resistance at 25 °C Resistance matching per reel/ packing unit at 25 °C Tolerance of R25 Please read Cautions and warnings and Important notes at the end of this document. Page 32 of 35 Superior series Sensors Limit temperature sensors, EIA sizes 0402, 0603 and 0805 T t TA ta TC tE TR Tsense Top TPTC tR Tref TRmin tS Tsurf UCT V or Vel Vc(max) VF,max VRMS VBD Vins Vlink,max Vmax Vmax,dyn Vmeas Vmeas,max VR VPTC α ∆ δth τth λ Superior series Temperature Time Ambient temperature Thermal threshold time Ferroelectric Curie temperature Settling time (for level sensors) Rated temperature @ 25 °C or otherwise specified in the data sheet Sensing temperature Operating temperature PTC temperature Response time Reference temperature Temperature at minimum resistance Switching time Surface temperature Upper category temperature Voltage (with subscript only for distinction from volume) Maximum DC charge voltage of the surge generator Maximum voltage applied at fault conditions in protection mode Root-mean-square value of voltage Breakdown voltage Insulation test voltage Maximum link voltage Maximum operating voltage Maximum dynamic (short-time) operating voltage Measuring voltage Maximum measuring voltage Rated voltage Voltage drop across a PTC thermistor Temperature coefficient Tolerance, change Dissipation factor Thermal cooling time constant Failure rate Lead spacing (in mm) Please read Cautions and warnings and Important notes at the end of this document. Page 33 of 35 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. Page 34 of 35 Important notes 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. Release 2018-10 Page 35 of 35